Cannot run ASDOC on windows

Similar Questions

• Cannot run TIME on Windows 7

  I recently downloaded and installed ESXi 5.5 on a server dell for the assessment and I would start it management.  So, I downloaded the file of open management of vSphere and cannot run it.

  In any case, when I try to run it in VMware VMplayer, I get the following errors (click on retry after first error):

  

  Thus, all the instructions on how to use this file on Windows 7 would be great.

  Thank you

  Jon

  VSphere client was the correct solution - given the issues raised in other forums on the limits of the ESXi 5.5 client vShere - I loaded rather ESXi 5.1 on the server.  It does not always meet http: applications - but telnet confirmed the connection.  Then found Vsphere client download and installed and connected successfully.  Found 5.5 client, but decided not to risk the upgrade at this point.

• Satellite A205-S4707 - cannot run camera on Windows 7

  Hi all!

  I have Toshiba Satellite a205 s4707, with Windows 7.

  It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
  I tried to install a different software (not later), reinstall, update...

  I GIVE UP!

  Pls help someone! Show me that there is another way that it will run my camera!

  I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

  Help! PLS!

  Hey,.

  Error code 10 in Device Manager means usually only it s a driver problem...

  Which Toshiba page you downloaded the latest webcam driver?
  Using Windows 7 32-bit or 64-bit?

  In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.

• Qosmio G50 - 10I - cannot run Firefox on Windows 7 64 bit

  I would like to know if someone can run firefox browser (not in safe mode) on the Qosmio G50 - 10i using Windows 7 64 bit. Since I changed the operating system 32-bit to 64-bit, I can't use Firefox browser except change the browser in safe mode.
  Don't know if this is a problem with the computer or web browser.

  A control will be useful
  Thank you

  Hey Buddy,

  Of course, you can use Firefox on the Qosmio G50. Why it shouldn't be possible? Firefox can be used on all computers.

  In my opinion, you should try put it back. Download the latest version and update. Maybe it works.

• Cannot run executables in Windows 8

  This issue has been resolved without doubt, but I couldn't find a thread in this forum to explain what is the solution for the problem below:

  We have developed a software pacakge in LabView 2012 SP1. The installation works fine in all versions of Windows from (XP 32 bit to 764 bit Pro), but after I installed the software in a new machine with 32-bit Windows 8 (PC used to have Win7 and used to run the software very well), I get the following message:

  "the vi is not executable for the full development" (several times in a single dialog box). "

  The clues how to solve this problem?

  Should I upgrade my LabView or is it easier to change two or three check boxes in the project settings? Also, I don't like how my installer will be as long it will run on the new machine.

  Thank you for your help and future prospects for your advice!

  I solved the root of the problem!

  Its about having an older versoin of MS .net Fx installed!

  (LV needs 2.0 and 3.5 that installs the software itself, but 8 victory comes only with enabled 4.5.)

  This page describes how do to turn on or off windows features:

  http://Windows.Microsoft.com/en-CA/Windows-8/NET-Framework-Windows-8

  Thank you all!

• Cannot run IMVU on Windows 7

  OP: imvu is not compatible with w7

  whenever I try to run imvu it will appear so I tried the reallie problems and I don't kno wat im doing can help someone please

  490195f1-3cad-4A64-8eee-120bdc0af612
  1.03.01

  Hello xXgamergirlXx,

  1. do you have an error when you try to

  My research, I see that many users have been able to install IMUV on Windows 7 with some known issues. First of all, I suggest that you try to install the program in compatibility mode.

  Read this article which will give you information on how to run this program in Windows XP mode:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I also suggest that you post your question in the forum IMUV for a better answer to your question. You can follow the link below to ask your question:

  http://www.IMVU.com/catalog/modules.php?op=modload&name=phpBB2&file=viewforum.php&f=6

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Not authentic Windows cannot run Validator or Windows Update

  I recently put an SSD in my computer and I had to do a system restore once because Windows Update was not working.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - D84PF - F3PP9-CJKGD
  Windows Product Key hash: 37A3qk0TD8eF/4AaJAq4dwkhFCc =
  Windows product ID: 00376-166-1665136-86316
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.049
  ID: {4FB1075A-67F5-40CC-9668-874065D538F7} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional N
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {4FB1075A-67F5-40CC-9668-874065D538F7}1.9.0027.06.1.7601.2.00010100.1.0.049x 64*-*-*-*-CJKGD00376-166-1665136-863165S-1-5-21-1765290982-1649283749-1701564143LENOVO6459CTOLENOVO7LETC9WW (2.29)20110318000000.000000 + 000E8433007018400F804090409Central Standard Time(GMT-06:00)03LENOVOTP-7 L 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7, edition ProfessionalN
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c63f22b5-fdaf-4488-aeac-cc19411d0243
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00376-00172-166-166513-00-1033-7600.0000-2022014
  Installation ID: 017276689105979063113641435071154151486144191630580380
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CJKGD
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 29/10/2014 13:58:48

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:24:2014 17:34
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: NAAAAAEABAABAAEAAAABAAAAAwABAAEAeqicOBEdAC0an0aDLgg8XFjQRgYZhRAaGGJGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP - 7 L
  FACP LENOVO TP - 7 L
  HPET LENOVO TP - 7 L
  BOOT LENOVO TP - 7 L
  MCFG LENOVO TP - 7 L
  SSDT LENOVO TP - 7 L
  CO-SUBMISSION LENOVO TP - 7 L
  TCPA LENOVO TP - 7 L
  SLIC LENOVO TP - 7 L
  ASF!            LENOVO TP - 7 L
  SSDT LENOVO TP - 7 L
  SSDT LENOVO TP - 7 L
  SSDT LENOVO TP - 7 L
  SSDT LENOVO TP - 7 L

  Moved from performance of Windows 7 and maintenance Forum.

  Looks like that driver Intel Rapid Storage defective.

  Download and install the latest version of Intel:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22194

  Also apply to the following:

  Description of the Update for Windows Activation Technologies

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Cannot run Aero themes - windows desktop manager disabled

  I have a new laptop with Windows 7, windows Aero has never been run on this computer. When I run the troubleshooting Themes Aero, it said Windows Desktop Manager is turned off, when I try to turn it on it doesn't let me. I tried to restart it, and it does not work.

  I checked and my laptop should be able to run Aero views.

  My computer is a HP Elitebook 8460p

  4.0 GB Ram

  My Experence Windows index is 4.8

  I searched on the net and almost all tried, someone at - it ideas?

  Wallpaper,

  http://support.Microsoft.com/kb/2504610

  See also this,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-Aero-disabled-how-can-i-enable-it-again/aa760f0f-EEC1-4a36-B212-c96130038d5c

  Enable Office Manager,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Aero-Troubleshooter-says-desktop-window-manager/82f1eb92-D371-407C-8118-bee158c3ccae

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot run Windows 7 SP1 on big HDD (1 TB)

  Hello

  I just realized about this very recent which is apparently now closed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=275105

  I had same problem with a Toshiba 1 TB drive - I lost on that day and tried at least 10 Windows 7 installs with various behaviours/settings/partitions and still the same result. Cannot run Windows Update.

  I also tried to install Windows 7 SP1 from a DVD and have failed with a catastrophic mistake. I also tried to reformat the disk, the WIndows repair tool (ha!) update and installation when you're standing on my head while reciting the works of Shakespear.

  I gave up in the end and decided to NOT use it as a system disk at all. Instead, I installed Windows 7 on a smaller drive and uses the 1 TB and successfully as a secondary on the same PC drive with a single partition of 1 TB.

  I'm likely to have problems - maybe when the player is more complete and if I might be wise to split into 2 or more partitions?

  I just bought the drive so I can send it if it's going to be a waste of time.

  Thank you very much.

  And what model of Toshiba laptop do you have?

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot find enough available video memory when running GTA on Windows 7

  Original title: cannot run the game of GTA on window 7 ultimat? ___i can't run any verson survival gear high game... __plz help me

  I have a problemm on running the game gta...
  I have an error like "grand theaf auto VC cannot find enough memry video availeble.
  How can I solve this problem...

  I can't run any type of game on window 7 so what driver or grafics can I download for this problem

  This error comes on Windows xp when the 'stand by' folder cannot highlight when we move from our computer.

  It is likely that your graphics card, a physical part of your computer, is not good enough to play these games.
  If this is the case, take your PC to a repair shop and ask them to upgrade the video card.

  Please post your specifications so that we can assure you that this is the problem.

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!