Cannot run command to config the NAC perfigo service

Similar Questions

• Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/run-chkdsk-f-to-check-for-hard-drive-corruption/05a2345a-a81e-4C44-A24B-ad299987a44c?page=2#LastReply

  Hello

  See if that helps you.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You are missing a space in the command:

  Type one of the following commands to run Chkdsk:
  NOTE: The most common command is chkdsk /f or chkdsk C: /f

  See you soon.

• Cannot run command - drive did not come online. check the configuration/hardw

  I have a Scalar i500 on a Linux host attached via fibre channel. I accept all work to automatically mount the drive. I can't make it work.
  
  I can use the web interface of the i500 and then put a tape in the drive. I can then mount the drive from a secure backup and mount a back very well. Yet, I can not run a backup without a mounted tape. If I choose "load Volume (by car)...." I get the error ' cannot run the command - drive did not come online; check the configuration/hardware.
  
  I can the inventory of the library and do anything except automount readers. I run an audit and configuration back with no errors. I tried to use the SCSI settings in the obl0 and obt0 and obt2 without success. I tried to use the/dev/sg raw without success paths. Same mistake.
  
  It is an upgrade from 10.1 to 10.3 installation. I tried to do a clean install with the same question. I've restored the installation and then run an upgrade with the same question.
  
  I'm stuck. Please help :)
  
  Thank you

  It seems you have the DTE is exchanged.

  Swap the DTE # assigned to objects device disk and try again. This could happen during an upgrade if you reassigned the scsi settings and features obt0 and obt1 swapped the scsi settings when they ran the last things.

• Cannot run command ' vmware-toolbox & ' anymore - Linux VMs

  ------------------------------
  VMware Workstation 9
  The host of WIN 7 x 64
  X 64 Linux Debian 6 comments (testing and Stable) + SLES, SLED 10 and 11 x 64
  ------------------------------

  all my VMs (debian, suse) linux cannot run # vmware - toolbox &
  It gives me
  # No such file or directory
  Please see attachment toolbox.png

  My intention is (as in previous versions) to see the vmware_toolbox to launch the GUI menu icon, where is possible to synchronize and other options etc.

  Please, someone knows what may cause this, or is this a bug?
  If so, is there a workaround for this problem?
  Thanks in advance!

  I read in other threads that VMware has deleted the VMware Tools GUI in VMware Workstation 9 and that command no longer exists so that Tools-vmware-cmd box .

• Cannot play command and conquer the first decade

  Original title: does not load in entriely

  Hi all

  I command and conquer the first decade on my computer, so about 4 days ago. If the disk loads up in the game selection menu, I click on red alert 2 with the file of the revenge of yuri. My computer screen everything turns black and acts as his charge, when all the brough sudden im back to the selection menu... help?

  Hello

  ·        What operating system do you use?

  ·        Were you able to play forward on the system?

  Try the game CD in another computer and check if you are able to play the game or not.

  If you use Windows 7, then the game is not compatible. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=command%20%26%20Conquer%3A%20The%20First%20Decade&v=EA&UID=&PF=9&PI=5&c=PC%20Gaming&SC=strategy&OS=32-bit

  The game is not compatible with Windows Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=command%20%26%20Conquer%3A%20The%20First%20Decade&v=EA&UID=&PF=1&PI=0&c=PC%20Gaming&SC=strategy&OS=64-bit

  Step 1:

  I suggest you to uninstall the game and reinstall in compatibility mode and check if you're able to play the game or not. Follow the steps mentioned in the articles given below to uninstall the game from the system and install compatibility mode.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• Cannot run command line error during program installation

  One of the suppliers with which our company works sent us a new program to securely transmit data between our computers and their server. I installed it on all of our computers but. I have run the install and I get a box that appears and says:

  . / files. Ink

  Cannot run commandline

  It is a professional Windows 7 system with all updates. Other computers I installed on are a mix of Win 7 Home & Professional and 2 systems to win 10.

  When I look at the installation on other computers, it is a simple installation of Installshield.

  I ran several programs to check the virus or maleware and he comes clean. I have run chkdsk /f and sfc/scannow. I run cleaning programs and defragmented the disk.

  It doesn't matter if I run it in compatibility mode different or as an administrator. Result in the box to appear.

  I can't pass this system to earn 10 again because of other programs that need to run on it.

  I could use you help figure this.

  Thank you

  I solved my problem. It seems at one point that the user has installed a program called UltimateZip not realizing that Windows would decompress the files for it. Later, she deleted the program and he had left his associations in the registry. I ran some programs uninstaller to make sure that none of the programs files have been left and then here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html and downloaded the

  files needed to restore the association for exe, zip, and lnk files. I followed the instructions on the site and merge the registry entries. I restarted the computer and was able to install the program. In fact, it is a simple process. Thanks to sevenforums for having this help there. I hope this helps someone else.

• Cannot run Simulink DLLs at the same time that the execution of the target time real VI

  Hello

  What I try to do is run a dll created in the Simulink model to control some servo through a CompactRio 9014.

  For the moment, I managed to create three screws

  (1) in the FPGA target that performs the PWM channel desired

  (2) which takes the value of a variable that contains the desired position and network that feeds to the 1st VI

  (3) a VI that is running on the host computer that changes the value of the network variable to change the position

  I can get these three work screw and the servo controlled, but when I try to update the value of the network variable using simulation, by deploying to the target of RT simulation and running, he said:

  ' Access denied: this objective is already used by another host or project. »

  I guess that's because the project is already connected the cRio, so I unplug and am able to deploy the model files.

  However, when I try to run one of the screws in the Targer RT as well as simulation I get the error:

  "This VI is downloaded to the target, but is not present in the project you are trying to deploy.  All the screws on the target will be closed unless you choose to add the missing project VI. »

  With a large number of missing screws...

  I'd do this wrong, i.e. is there a simpler way to control inputs FPGA using the simulation, or is there something I have missed?

  Thank you

  Geoff

  Hi Geoff,

  I think I understand what you're trying to do and what you've done so far.

  If I'm not mistaken you have passed through the SIT connection manager, set your target RT (select DLL, mappings and hardware i/o) and this is his 'magic '.   If this is the case of look for the project pilot LabVIEW which was created by the SIT connection manager.  This should live in the same folder where is your DLL.  Open the pilot project, search for VI driver and open it.  Then go into the Sub - VI # 5 has with the name of the loop rate Base.  It's the Subvi who reads/writes on the material and the reads/writes the data to the DLL/OUT model.  If you want to read the output of your model and then manipulate the data that is where you need to add your code.

  Inside of this Base rate loop VI there is a Subvi with number 4 and called SIT take model Timestep.  This VI is the one who makes the call to the DLL model.  The output of this VI is your data from the model.  This data goes into slot - VI # 5, which is responsible for the drafting of these data to the material.  Since you want to manipulate that data from the model, you need to recover data from the wire coming from the Subvi 4 (SIT take model Timestep) before it gets to the Subvi # 5.

  In this VI of Base rate loop, you will see that there are a few empty block structures.  These images are for you to put any code you want.  The reason is that any changes you make to the driver VI and subVIs that aren't inside of these frame structure will be lost if you decide to go in the connection manager to sit DOWN again and make some changes.  The VI pilot gets new script whenever you do something in the SIT connection manager.  Whatever it is inside these frames will not be erased.

  So, if you have a code you want to run in parallel to the simulation you just have to drop it inside this driver VI.  Very probably within this Subvi 5 (Base rate loop). To add your code just drop the VI in one of these settings and make any changes that him so that he can read the data in the model.    Furthermore, the model (Subvi 5) data in a table.  For the index of each element in the array and its meaning look for a file in the same folder where the DLL is named readme.txt ports.  This file has a description of the inports and small ports and their indexes.

  This VI driver is called when run you the host VI so you won't have to run sepearately.

  Kind regards

  Ricardo

  National Instruments

  Systems engineering

• Cannot run Windows Explorer using the interactive services detection

  Hello

  I have the tool using the interactive services detection to display applications. I have to refrain from using the Terminal Server services for the moment and the DSI is the only option I have. Now the problem is, this tool must run Windows explore periodically as well as other applications Viz Notepad, wordpad. It shows notepad and wordpad but always fails to open windows Explorer. Any ideas on that?
  PS: everything what I described above works great with the Terminal Services
  Thank you
  Madhu

  Hi Madhu,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot activate Windows 8 error "the Software Licensing service determind that specified only usable product key for the upgrade not to own pieces."

  Original title: invalid product key :(

  Today, I tried to load my computer and was faced with the blue screen error short story that my hard drive some how became corrupt and had no partition. Fortunately, I had a friend who told me step by step how to solve this problem using my hard drive in my brothers pc. When it came to reinstalling windows I booted the computer directly from my windows disc 8 and when I tried to activate the key once I was ready to I received an error Code: 0xC004F061Description: The Software Licensing service determind that specified only usable product key for the upgrade not for own pieces. Means that I can not use the key I bought and must buy a new one? It seems really unfair because I've already spent money on the upgrade.

  You upgraded to Windows 8, but did not have an earlier version of Windows Installer (error 0xC004F061)

  If you see error 0xC004F061 when you try to activate Windows 8, this means that you are using a product key for an upgrade of Windows 8 version and a previous version of Windows wasn't on your PC when Windows 8 was installed. To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• Cannot run business ruleset using the Launcher command line for the calculation Manager

  Hello

  I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

  D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

  At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

  Local planning: en_US

  using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

  EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

  using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

  For the non - RFP app, ask size is not necessary

  EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

  Support RTC Essbase Version: 0xb1221

  null

  But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

  Any help on this request would be much appreciated. Please notify.

  Thank you

  AP

  Please ignore this request,

  I found the KB article below

  Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

  Thank you

  Arun

• lThe cannot run command

  When attempting to open attachments to emails, I get the window that says: "the command cannot be run."  Help!

  Hi Inkydo,

  Thank you for using answers Forum.

  What mail client do you use?
  What Internet browser is your default? (Internet Explorer, Firefox, Chrome, etc.).
  What kind of attachments are you try to open it? (Document Word, PowerPoint, photo, etc.)
  Can you post the file of the attachment (.doc - .docx - .jpg) extension

  If your use of Windows Mail, I suggest you upgrade to Windows Live Mail.

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of the application with the engine running and system Config API kills many services OR

  If I have an empty Windows 10 computer and install LabVIEW 2015 SP1f5 Run-time-Engine, then System Configuration 15.3.

  I see that several OR services are running OK on the machine subsequently:

  

  However, if I can install a built (LabVIEW 2015SP1) app - using an installer which includes also the 2015 SP1f5 RTE and the configuration of the system API 15.3, five services will not start and cannot be started manually either (affecting all the services into recovery mode restart fails too). Error code when you try to manual start is 1068 that indicates they are missing a dependency, but * any * of them will start...

  

  I suspect that is the reason that neither Max 15.3 ends with a timeout during the peripheral configuration warning - AND my use of RAD / system configuration set image function is a failure...

  Why the hell the same software support (which should really be installed in all cases, the application itself must be installed) has this devastating beats me. The only way to obtain the services of backup and running is to uninstall everything, even to delete all files remaining and records... and then reinstall the original RTÉ and SysConfigs.

  The problem seems to be a sort of obscure corruption both of my computers for development... I took the same source code and built the installer on a third computer with all the same IDE versions, and voila - everything works well.

  It would be good to know exactly what the problem is, but for now at least, I have a solution... (hopefully fix my machines and/or before you wipe them clean and reinstall the IDE together on them will get back on track...) Without knowing what the cause was however makes me wonder if I might have the same problem again later).

• Cannot move command bar to the bottom of the screen where it used to be

  My command bar allowing to always be horizontally at the bottom of my screen.  I had activated lock the taskbar so that it could stay put.  However, somehow or another, it must be disabled and somehow or another, the result was that the command bar has been moved to the right of the screen vertically.
  I have tried dragging down but can only drag more wide to the left, but cannot get to the bottom of the screen, there is only a tip of arrow-left to work with.
  I tried to enable and disable the lock the taskbar option and a new attempt to drag the command bar, but nothing seem to work except making it wider or narrower.  What I am doing wrong?  HELP Please!  Thank you very much.

  Thank you very much, TaurArian... it has worked like a charm!  Much appreciated!

• Cannot run cloud, tried all the troubleshooting help adobe web creative

  After migration system from my old Mac to new - el Capitan, I can't start creative cloud. I tried to just uninstall all adobe, using the reset tools, a few restarts comp, even start in safe mode. nothing help.

  When I launch an application, empty spot appearing between the icons in the menu bar to 10-15 seconds, then the icons range from the rear and window appear that «creative cloud close unexpectedly, send the report to adobe...» »

  What can I do?

  Hi jerryk21498116,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • Go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager)

  4. then run the cleanup tool to remove the clouds creative and Adobe Application Manager (if it remains in the machine)

  5 right-click on the icon in the Finder, then select 'Go - To' folder.

  6. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  7. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  8. new > right click on the Finder icon and select 'Go-' the folder option > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  9. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  Adobe 10 - run cleanup tool. > If present, select "Adobe Application Manager for Mac OS X 10.6" and then click "Clean up selected."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  11 - click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

  Let us know if that helps.