lThe cannot run command

Similar Questions

• Cannot run command ' vmware-toolbox & ' anymore - Linux VMs

  ------------------------------
  VMware Workstation 9
  The host of WIN 7 x 64
  X 64 Linux Debian 6 comments (testing and Stable) + SLES, SLED 10 and 11 x 64
  ------------------------------

  all my VMs (debian, suse) linux cannot run # vmware - toolbox &
  It gives me
  # No such file or directory
  Please see attachment toolbox.png

  My intention is (as in previous versions) to see the vmware_toolbox to launch the GUI menu icon, where is possible to synchronize and other options etc.

  Please, someone knows what may cause this, or is this a bug?
  If so, is there a workaround for this problem?
  Thanks in advance!

  I read in other threads that VMware has deleted the VMware Tools GUI in VMware Workstation 9 and that command no longer exists so that Tools-vmware-cmd box .

• Cannot run command - drive did not come online. check the configuration/hardw

  I have a Scalar i500 on a Linux host attached via fibre channel. I accept all work to automatically mount the drive. I can't make it work.
  
  I can use the web interface of the i500 and then put a tape in the drive. I can then mount the drive from a secure backup and mount a back very well. Yet, I can not run a backup without a mounted tape. If I choose "load Volume (by car)...." I get the error ' cannot run the command - drive did not come online; check the configuration/hardware.
  
  I can the inventory of the library and do anything except automount readers. I run an audit and configuration back with no errors. I tried to use the SCSI settings in the obl0 and obt0 and obt2 without success. I tried to use the/dev/sg raw without success paths. Same mistake.
  
  It is an upgrade from 10.1 to 10.3 installation. I tried to do a clean install with the same question. I've restored the installation and then run an upgrade with the same question.
  
  I'm stuck. Please help :)
  
  Thank you

  It seems you have the DTE is exchanged.

  Swap the DTE # assigned to objects device disk and try again. This could happen during an upgrade if you reassigned the scsi settings and features obt0 and obt1 swapped the scsi settings when they ran the last things.

• Cannot run command line error during program installation

  One of the suppliers with which our company works sent us a new program to securely transmit data between our computers and their server. I installed it on all of our computers but. I have run the install and I get a box that appears and says:

  . / files. Ink

  Cannot run commandline

  It is a professional Windows 7 system with all updates. Other computers I installed on are a mix of Win 7 Home & Professional and 2 systems to win 10.

  When I look at the installation on other computers, it is a simple installation of Installshield.

  I ran several programs to check the virus or maleware and he comes clean. I have run chkdsk /f and sfc/scannow. I run cleaning programs and defragmented the disk.

  It doesn't matter if I run it in compatibility mode different or as an administrator. Result in the box to appear.

  I can't pass this system to earn 10 again because of other programs that need to run on it.

  I could use you help figure this.

  Thank you

  I solved my problem. It seems at one point that the user has installed a program called UltimateZip not realizing that Windows would decompress the files for it. Later, she deleted the program and he had left his associations in the registry. I ran some programs uninstaller to make sure that none of the programs files have been left and then here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html and downloaded the

  files needed to restore the association for exe, zip, and lnk files. I followed the instructions on the site and merge the registry entries. I restarted the computer and was able to install the program. In fact, it is a simple process. Thanks to sevenforums for having this help there. I hope this helps someone else.

• Cannot run command to config the NAC perfigo service

  I have a new Server Manager of the NAC for a deployment costs. I logged in using the root with a connection password set on the server.

  I can't be able to run the 'service perfigo config' command to perform the initial configuration of the CAM.

  [[email protected] / * / /] # start service perfigo

  perfigo: unrecognized service

  [[email protected] / * / /] #.

  No idea what could be the problem?

  Thanks in advance.

  Have you installed the CAM software on it, or it was already installed?

  If it was already, I recommend you the image with the DVD.

• Cannot run command 'dsccsetup war-file-create '.

  I have copied Setup Sun Directory Server 7.0 on/test and installation path is/opt/SUN
  
  I tried this:
  bash-3. 00 # / opt/SUN/dsee7/bin/dsccsetup war-file-create
  bash: / opt/SUN/dsee7/bin/dsccsetup: invalid argument
  
  It says: invalid argument
  Even with
  bash-3. 00 #. / dsccsetup war-file-create
  bash:. / dsccsetup: invalid argument
  
  Same out put
  
  My OS is Solaris 10, please let me knoe how to proceed.
  
  Appreciate your quick response.

  Hello

  This cryptic message can be triggered on Solaris when you try to run an x 86 binary on a SPARC machine (or vice versa).

  Hope this helps

  -Sylvain

• Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/run-chkdsk-f-to-check-for-hard-drive-corruption/05a2345a-a81e-4C44-A24B-ad299987a44c?page=2#LastReply

  Hello

  See if that helps you.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You are missing a space in the command:

  Type one of the following commands to run Chkdsk:
  NOTE: The most common command is chkdsk /f or chkdsk C: /f

  See you soon.

• Why the following command cannot run correctly?

  Why the following command cannot run correctly?
  

  SQL> exec DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE;
  BEGIN DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE; END;
  
        *
  ERROR at line 1:
  ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in call to
  'EVOLVE_SQL_PLAN_BASELINE'
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored

  Because it is a FUNCTION and not a PROCEDURE.

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28419/d_spm.htm#CACEBBEI

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Cannot run Chksk...

  Hello, I have problems with chkdsk.

  When CHKDSK runs at startup it freezes during step 2, so I can't run it at startup.
  I checked the drive using the command prompt "fsutil dirty query c:" and confirmed the disc to be dirty. I then restarted the PC in safe mode and run "chkdsk /f C:" tried, but I got this error:

  The type of file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  I chose to do not to run it at startup, because of the problem of gel.

  I also ran the manufacturer diagnostic tool and it came clean on the quick and full scans.

  Recently, I got a blue screen error as well, but I have been unable to enter the error code, so I don't know if it's related...

  P.S. I accidentally posted this on the vista forums... In the case where someone wondered why he looked familiar.

  Here is a link to a TechNet forum dealing with this error: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/8749e819-cd86-4b51-9c27-5ac5c7c840e7
    
  It seems that the issue is going to be caused by a corrupted file system, the HD out or possibly bad memory. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SSH session with QNX momentics-> cannot run - permission denied

  Hello everyone I am new to this world to develop a blackberry and I have a question about ssh, it can be quite simple, but a simple tip could save me from going crazy.

  When I open an ssh session with my blackberry and try to execute statements such as ping, it is said:

  Ping $
  SH: ping: cannot run - permission denied

  So my question is: is there a way to access these permissions and run the command?

  I use qnx momentics, a real device and access the ssh by qnx momentics option launch a ssh session.

  I'd appreciate any advice or tips or whatever it is that one can say to help me, thanks in advance

  When you connect via SSH, logged as "devuser". This user has limited permissions... basically these permissions that would be a regular application.

  To run the 'ping', you need a higher level of access. (Check permissions and ownership with "ls-l/usr/bin/ping") This isn't an option, so the answer is no, there is no way to do it.

• Error-cannot run the file: iexplore.exe. ShellExecuteEx failed; code 2.

  Hello, my pc is very slow, and then restored the system.
  And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:

  Cannot run the file: iexplore.exe
  ShellExecuteEx failed; code 2.
  The system cannot find the specified file.

  I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.

  Or find me in my computer the "iexplorer.exe".

  A friend told me that there is an error in the "System32" folder But I haven't changed it.

  What is this error? Can I format the computer?

  PS: I do not speak or write English very well. Sorry for mistakes in the text.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Check to see if you can launch Internet Explorer

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• PhoneGap: Cannot run program "C:\Program": CreateProcess = 2 error

  Hi all

  I built my app without problem until now, but now, when I try to build it, I get this error:

  build:
       [exec] [INFO]                      Parsing command line options
       [exec] [INFO]                      Parsing bbwp.properties
       [exec] [INFO]                      Validating application archive
       [exec] [INFO]                      Parsing config.xml
       [exec] [INFO]                      Populating application source
       [exec] [INFO]                      Compiling BlackBerry WebWorks applicatio
  n
       [exec] I/O Error: Cannot run program "C:\Program": CreateProcess error=2, E
  l sistema no puede encontrar el archivo especificado
       [exec] [ERROR]                     RAPC exception occurred
  
  BUILD SUCCESSFUL
  Total time: 27 seconds
  

  The Spanish part of the error is labeled "the system cannot find the file specified."

  I added in the "path" environment variable JAVA_HOME %

  I tried to edit bbwp.properties to change "Program Files (x 86)" to "progra ~ 2" but it fails not before. "

  I have updated java a few days ago and I think it is a problem with spaces in the path of "Program Files" (x 86), but I don't know where is the file that contains the path that is the cause of the problem.

  I tried with - verbose during construction, but it does not help.

  Can you help me?? a solution or trick to solve this problem?

  Thank you very much.

  Thank you all,.

  Java 7 is installed (32-bit), I had, I had a variable JAVA_HOME pointing to the latest version installed and %JAVA_HOME%\bin got in my way, but it failed with all this.

  I've solved an "easy" way I downloaded the latest versions of ant, java and the sdk webworks and them reinstalled in c: in a path without spaces. I changed the value of the variable JAVA_HOME and path in the file project.properties pointing to the new and everything worked as before.

  Hope this can help someone.

  Thank you for your support.

• ASP - function Remote - error: cannot run the trigger

  Hello

  I tried to get my macros being run by a remote server.

  It's my function file remote named "remote_test_pc.asp":

  framework integrated; then

  conf t

  interface $INTERFACE

  Description macro $TRIGGER

  PC-VoIP-Port Description

  switchport access vlan $ACCESS_VLAN

  switchport mode access

  switchport vlan voice $VOICE_VLAN

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  no event log status link

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no link-status of snmp trap

  spanning tree portfast

  spanning tree enable bpduguard

  service-policy input PO_TRUST-PHONE

  output

  end

  FI

  framework integrated; then

  conf t

  interface $INTERFACE

  No description of macro

  Description by DEFAULT-CONFIG

  switchport mode access

  switchport access vlan 999

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  spanning tree portfast

  No switchport voice vlan $VOICE_VLAN

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no service-policy input PO_TRUST-PHONE

  FI

  output

  end

  FI

  And this is my config on the switch to mac-group and the macro:

  !

  macro auto Test group address-mac-PC

  Mac 0019.9990.5509 address list

  !

  comprehensive treatment of the auto macro

  macro auto control global detection mac address

  !

  automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127

  !

  When I plug this workstation for the following syslog messages:

  Switch #.

  Remote_test_pc.asp loading!

  [OK - 1702/4096 bytes]

  Enter configuration commands, one per line.  End with CNTL/Z.

  Switch con0 is now available

  Press RETURN to get started.

  Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function

  26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console

  26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message

  Switch #.

  The port works as it should, but I wonder about the error message.

  The switch is 2960 with IOS 12.2 (58) SE2.

  Can someone explain what this means?

  Thank you very much!

  Sven

  Hi Sven,

  I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.

  Thank you

  Ankur-