Cannot run my application in debugging more

Similar Questions

• Cannot run the application, appdata not available

  I can't run the applications that I install. He tells me %APPDATA%\microsoft\windows\sendto cannot be accesed

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. Have you been able to run the same applications before?

  I you suggest trying to run the program as administrator and check if this can help, right-click on the program and click Run as administrator.

  You can also try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Error messgae: "the screen saver cannot run because it requires a more recent video card", attempting to display the screen saver and the error code 40 download the fix.

  Original title: cannot run zip; error code 40 (hotfix for the video card)

  Hi, I ' m trying to view my screen saver and it seems to be causing "the screen saver can't run because it requires a newer video card or compatible with 3d graphics." (2030 M-windows7 dell) .thanks Jean-Michel

  Hi John,.

  1. what screen saver are you trying to view?

  2 is confined to a specific screen saver?

  3. have you installed SP1 for Windows 7?

  This problem occurs because of a problem in 3D screensavers.

  Fix error occurs if you have a corrupt hotfix package or may have downloaded the wrong patch for your platform.

  This can also occur if the hotfix is included in SP1 and you have already installed Windows 7 SP1.

  Method 1:

  You must make sure that the hotfix you download is depending on the version of Windows 7 installed on your computer.

  For more information, see the article:

  Error message when you set a 3D screen saver screen saver in Windows 7 or in Windows Server 2008 R2: "the screen saver can't run because it requires a more recent or Direct3D-compatible video card.

  Please see if you can copy the file that you downloaded to another computer or location and try to unpack.

  When you download the fix, save it in a new location (on the desktop) and the password given with the fix allows to extract the file.

  Method 2:

  Step 1:

  You can also try to run the display quality Troubleshooter and check if it helps.

  Step 2:

  You too, try to install the latest version of the Site Web of Dell display drivers and check if it helps.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Install the ear of Console - cannot run the application.

  JDeveloper 12 c 32bits.

  I'm checking my ear is produced correctly by deploying the console of weblogic (which is really just the integrated environment).

  The installation says it works great... but I can't launch the web page by using the same URL I used the deployment of Jdeveloper.

  I was capable of that test applications with little (with security). But the Application that I just spent a month of work on is a failure!

  Some features:

  The ADF security is on.  I have an application role, two users, and set up a same business role.

  users are granted to the role of the company.

  The role of the App is given to the role of the company

  Each workflow task and web pages are granted to the role of an application.

  WebLogic is configured with users and the role (which both correspond to users and the enterpise role in the security of the adf).

  The screen 'set up the Security deployment.

  Checked the weblogic application update. XML with the following parameters

  Application enabled policies

  Uncehcked credentials

  Groups and users not controlled

  Unchecked Auto generate and synchronize Weblogic JDBC descriptors during deployment

  Can I deploy on Jdeveloper to Weblogic Server the Integrated and it works.

  Connect the output: I get this when deploying Jdeveloper (it works) and when I install the ear to Weblogic (installation works, but I can not run the application).

  < 25 November 2015 14:54:52 this > < WARNING > < Application customer > < BEA-2162200 > < no hand-class defined in the Java Module manifest file: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped. >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.credstore > < JPS-01033 > < cannot set credentials. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.upgrade > < JPS-06003 > < cannot migrate the information to key/identification of the AISMainMenu-4131/anonymous file #ERPD. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:57 this > < WARNING > < HTTP > < BEA-101384 > < WLServlet annotation is deprecated, use instead servlet 3.0 annotation. App:AISMainMenu@AISMenu, Class: oracle.adfinternal.view.faces.activedata.AdsServlet >

  I can deploy from Jdeveloper, but if I have a deployment on the built-in console (an ear file) of weblogic server, I can not run the application.

  I get the wrong URL?  It should be the same as the deployment of Jdeveloper on the integrated server.

  Thank you

  Stuart

  This is the error

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address

  Timo, Dario,

  I finally got to work.  I fiddled around so much with her, I don't know exactly what fixed - or a combination of two settings.

  Thank you very much for your help!

  Stuart

• Cannot run this application on your PC message

  I just bought the new bundle Photoshop Elements and first.  I get the message "this application cannot run on your PC" when I try to install it.  I am running Windows 10 Home version 1511.  My device meets all of the requirements listed.  I have elements and first 10 currently on this unit and they work without problem.

  Are you using Adobe download links? If not, give them a try.

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

• Cannot run the application because of the failure of deployment

  Hi all
  
  I try to run the application that was working fine until today morning. When I try again once I am getting an error something like this:
  
  
  [14: 46:16] # incomplete deployment. ####
  [14:46:16] Error listing directory file:/C:/Users/kxnt334/AppData/Roaming/JDeveloper/system11.1.1.4.37.59.23/o.j2ee/drs/Export_word_conditions/ViewControllerWebApp.war/WEB-INF/lib/AMTeamIssues/NomsigApprovalProcessIssue/Nominated_Signatory_Approval/Nominated_Signatory_Approval_Process/public_html/
  # Cannot run application Export_word_conditions due to the deployment on IntegratedWebLogicServer error.
  [Export_word_conditions application stopped and cancelled Server Instance IntegratedWebLogicServer]
  
  I use the jde11.1.1.4.0 version. I tried to deploy it to the default weblogic server.
  
  Kindly help me on this.
  
  Thank you
  Phani.

  Hello
  Try clean after all. (Build--> clean all). Also restart the server.

• Cannot run windows applications 8 on my computer toshiba satellite laptop

  Hello

  I have a Toshiba satellite laptop and I recently installed windows 8 on.
  but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
  so I can't run any application, it disappears immideatly and does not load.
  could you help me solve this problem.
  Thank you!

  Hi Benjamin,

  For the question links to applications, please try the following steps.

  Method 1:

  You can see the steps from the following link.

  What to do if you have problems with a soft

  Method 2:

  Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

  (a) select the Internet Explorer tile on the start screen.

  (b) turn left click on the settings icon in the lower right.

  (c) select Show the desktop. You will be guided to desktop Internet Explorer.

  (d) select settings (speed) icon in the upper right.

  (e) select Internet Options in the menu drop-down.

  (f) go to the connection tab on LAN settings from the lower right of this window.

  (g) uncheck the box that says "use a proxy server for your LAN settings.

  Please post with the State of the question.

• Cannot run any application system as anything in the administration tools, network and sharing Center, Device Manager. No problem running the applications Office, IE, etc.

  Vista Ultimate, 32-bit, SP2 had worked perfectly for two months. Machine set up to now and when started the first time, no network connection and my video wallpaper stops with an error message that says to reboot. The 2nd restart, I get internet connectivity, no wallpaper at all and no access to system applications that are listed in the title line.

  I can open Documents and navigate around, click computer and see the disks, etc., right click on computer and view the properties, but it shows no RAM and processor. If I click on Device Manager on this window, it crashes just forever unless I have kill with Task Manager.

  I had Windows Live Onecare on this machine and it expired during the period, it was closed. No problem... I plan to install MSE.

  Originally, I installed a smaller version of Vista of CD (still have it) but upgraded to Ultimate online and is not a product for this upgrade CD.

  I need to know where to start on fixing Vista so that it works correctly.

  Thank you.

  Hello

  ·        Where you upgrade the system for full vista?

  It is better that you have the Vista Ultimate DVD, so I suggest you ask the DVD from the dealer.

  I suggest you to check in the Event Viewer logs and let us know the exact error.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run the application module in a project of (Model) generic in BPM application

  I use jDeveloper 11.1.1.6 and I want to add a generic or a model for a BPM application project, in order to develop the custom user interface.
  but when I created an application module with associated and then java class do a right click on it to run, I saw the following error message:
  
  (oracle.jbo.ConfigException) Houston-33001: tester.xcfg Configuration file is not found in the classpath.
  
  more when I use a merger Web application instead of BPM application, with the projects of model and view controller, there is no problem and I am able to run the module of the application.
  
  Thank you very much for your contribution.

  Comment the mds-config section in your adf - config.xml temporarily and try. It will work

• Cannot run the application CS CC

  I lost two days of efforts, reading the forums here, try various suggestions and had no luck.

  I used sudo chmod-r 775 library/Application\ Support / Adobe. I made the suggestions http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html (regarding file permissions for Library/Application Support/Adobe/Adobe PCD / and/Library/Application Support / Adobe / SLStore. )

  I have uninstalled and reinstalled several times.

  I ran the creative cloud cleaning tool: http://www.Adobe.com/support/contact/cscleanertool.html

  When I try to start Dreamweaver or Fireworks, I get 16 Configuration error.

  Lightroom starts very well.

  When I try to start Adobe Acrobat Pro XI, she brings up Adobe Application Manager and offers you to uninstall Acrobat. I did, then reinstalled, and he returned with the dialog box offering to uninstall.

  For a suite of applications which * rent * for $600 per year, I expect better. I've seen several posts like this on the two Adobe forums and external forums. Do you guys tested this installation? I'm so tempted to abandon Adobe and move to alternatives, especially since you dropped now still Fireworks development.

  Edited to add:

  I created an administrator with root access account. In this story, Dreamweaver and Fireworks * start. So, it could be a file permissions problem, but again, see my suggestions for file permissions regarding second paragraphy posted elsewhere in this community.

  Post edited by: JimInBoulder

  Hi JimlnBoulder,

  On your Mac from your real user account could you please cut the Adobe PCD folder and SLStore from the two location on your desktop and then try to run Dreamweaver and Fireworks and let us know if it works or not.

  / Library/Application Support/Adobe/Adobe PCD /.

  / Library/Application Support/Adobe/SLStore

  Also if you wish I can contact you to help on the issue.

  Just send me a private message.

  Kind regards

  Abhijit

• Cannot run PL/SQL using SQL * more

  Hello
  
  I am very new in the SQL environment. I want to run the following PL/SQL code, which should allow me to send an e-mail, using sql * more:
  
  DECLARE
  l_mailhost VARCHAR2 (64): = "qiudubcorrel001.qa.local";
  l_from VARCHAR2 (64): = "[email protected]";
  l_to VARCHAR2 (64): = "[email protected]";
  l_mail_conn UTL_SMTP.connection;
  BEGIN
  l_mail_conn: = UTL_SMTP.open_connection (('10.253.14.240'), 25);
  UTL_SMTP. HELO (l_mail_conn, '10.253.14.240');
  UTL_SMTP.mail (l_mail_conn, l_from);
  UTL_SMTP. RCPT (l_mail_conn, l_to);
  UTL_SMTP. Data (l_mail_conn, 'single string message.' |) Chr (13));
  UTL_SMTP. Quit (l_mail_conn);
  END;
  
  When I type the code above in sql * Plus, it does nothing but waiting just as if the code is incomplete and he expects something more! Could someone tell me what is the problem here?
  
  Thank you
  Kamal

  Hello

  Try to put a / on a new line after END;

  Concerning
  Peter

• Satellite 1800-400: cannot run/install applications after installing XP

  I bought a Satellite 1800-400 for my daughter for her school work, formatted, installed XP pro, and when I tried to install the software for a wireless card (3Com) for internet access, he said only: "the application failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  So I tried another card (Belkin) software it says "D:\ is not a valid Win32 application". So I tried to install the printer software and he says: 'the entry point of procedure not found in KERNEL32.dll dynamic link library.

  So I thought I'd try XP Home, exactly the same, Win 98 and WinME function without problem.
  I have also flashed the Bios, but it made no difference.

  Someone at - it ideas

  Simes

  Hmm, it s very strange. For me, it seems that some applications are not compatible with Windows XP. I m not 100% sure why it happens, but I put t think that it s a RAM problem because the other Windows Me and 98 to work properly.
  But nothing is impossible

  What version of BIOS is installed on your laptop? On the Toshiba page pilot 2.20 BIOS was released.
  If your laptop uses an older version, you can try to update.

• When I try to open Windows Live Movie Maker, he said computer cannot run this application.

  Windows Live Movie Maker

  I was finally able to install the Windows Live Movie Maker. (I used the older version that came with the computer when you purchase 2 years ago) He rejected me several times. After I updated everything that was necessary to meet the requirements. Finally he installed successfully and I have restarted the computer by following the instructions. Now when I try to open it, it says computer cannot open it. I've rechecked all the requirements, memory card, have Vista SP2, DDI, ect... then why doesn't it opens. I'm not a person real computer savey, so I hope I'm not over my head.

  You are in the wrong forum.  This forum is for the Vista installation.  Please use the Windows Live Movie Maker Support page at

  http://explore.live.com/Windows-Live-Essentials-Help-Center?T1=T3

  and the Movie Maker Forum

  http://www.windowsmoviemakers.NET/forums/default.aspx

• Cannot run the application: Java Virtual Machine cannot be loaded. Class not registered

  I want to launch the TI Flash Studio program on my computer windows 7, but the above error when I try to open the program, when I download the suggested 'Virtual Machine' I get another error message that says that the 'Virtual Machine' is not compatible with windows 7, how can I solve this problem?

  Hello hallaman3,

  I did not find TI Studio listed in the Windows 7 Compatibility Center. I suggest that you contact TI to see if they have an updated version.
  I found a new version of TI connect to be compatible with Windows 7. Not sure if you need it for TI Studio.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Repaired XP installation, cannot run the application "activate windows".

  I had to repair my installation of windows after an HD program, then the system was forcing me to activate before login, but activation would never wear a screen. relieved of this issue by the
  Rundll32.exe syssetup, SetupOobeBnk
  command. I can not connect, but now "activate Windows" does not work.

  I have the OEM product key, he agreed during the repair. but I'm not able to activate windows and not be able to use any software for MS, although most of the other programs seem to work.

  The yellow warning for non-activated windows box pops up again, but this time when I clicked, firefox open with a validation page. (previous clicks on the notification did nothing).  The page directed me to install the validation plugin. Once loaded, it could not get anything.

  The page contained a third option to download an alternative method. I download and it could not activate my installation of XP as well, but would allow me to buy Windows 7.

  http://www.Microsoft.com/genuine/downloads/GenerateHTA.aspx?displaylang=en&error=1&PartnerID=107&page=validate

  But now MSIE worked (it worked before) so I tried the link activate Windows on the start menu, and it was successfully launched. My windows is now activated and able to download updates.