Cannot run VMa 64-bit compatibility confusion

Similar Questions

• Cannot run WIndows8 64-bit 64-bit of WIndows 8.1 host reviews

  I am running VMware WorkStation 10.0 on a Windows8.1 64-bit computer. I tried to create a new virtual (8.0 64-bit Windows) machine. When I try to open the virtual machine, I get a dialog box indicating that the binary translation is incompatible with the long mode. When I click the OK button, I get a dialog box indicating that this virtual machine is set to the operating system 64-bit quest. However, the 64-bit mode is not possible.

  Shortly after the upgrade from 8.0 to 8.1 Windows my BIOS have been upgraded.

  I tried VMware WorkStation 10.1, same bad results.

  What should I do now?

  Post edited by: Florida9797

  While eating dinner, I realized the way I do now. After having updated the BIOS, I forgot to 'enable virtualization technology '.

• How can I create a Setup program for my project that can run on 32-bit Windows, if I have Windows Vista 64 bit?

  Hello

  I did a project in LabVIEW that works perfectly and made an installer for it. I tried the installer on my own computer and everything worked fine. The purpose of my installer has been putting it on several computers. So I tried to do it on another computer that has Vista 32 bit and he told me that the installer cannot run on 64-bit computers. I tried to choose to install the 32-bit runtime and it has not changed anything, there was still a message to tell me that this Setup program can be run on 64-bit computers. How can I make an installer that runs on 32-bit computers?

  Thank you.

  I have betieve you need to install the x 86 32-bit version on your PC too, and build an installer that.

• Cannot run 64-bit on HP 8100 CMT

  I'm trying to run an operating system 64-bit Linux on VMWare Player (Linux host), but I keep warning against long mode not supported.

  When I run the executable to check the compatibility of test it is said:

  This host is capable of running a 64-bit comments under the present operating system
  VMware product.

  But when I actually try and install the 64-bit Linux, it will fail with an error not supported.

  I looked in the BIOS and you don't see any options to set the bit of VTx or anything else in the article.

  Any suggestions welcome!

  Welcome to the community,

  Please double check if 'Virtualization technology (VT - x)' and 'Execute Disable Bit' parameters are available in the section 'Security' of the BIOS. If so make sure that both is 'enabled' and - after saving the BIOS settings - make sure that power you cycle the system (power power off)!

  André

• Cannot run 64-bit VM on 64-bit host.

  I have a 54 bit OS (Windows 7) crowd, but am unable to run a 64-bit VM. Any suggestions?

  Here are a few attached screens

  You need a CPU of VT - x and the T4200 isn't.  For this purpose, you cannot run x 64 guests

  http://Ark.Intel.com/product.aspx?ID=37251

• Cannot run windows 7 64 bit, but the computer is capable.

  I ordered the online download of windows 7 64 bit by accident.  My computer is capable of running windows 7 64-bit, however, I'm currently running vista 32 bit.  Is there a way can I return my order online for the 32 bit, or do I have to download the 64-bit version and has two operating systems on my computer?

  We are dealing with Windows Update features in this forum, not the upgrade of Windows. Transfer your question here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or contact Support MS. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Vista 64 how you default to the browser to run as 32-bit Windows. IWant to run the home software to allow a readerthis prgam is 32-bit only compatable.help!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

  The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

  There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

  This is the title of each and they run exe:

  Internet Explorer
  "C:\Program Files (x 86) \Internet.

  Internet Explorer (64-bit)
  "C:\Program may Explorer\iexplore.exe.

  One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot run the moment TV/Radio Internet USB Stick in 64-bit Windows 7

  It was a gift and I want to play with it! The brochure says it will work with Windows 7. There is no apparent technical support available. The driver loaded OK. When I tried to run, I got the MSINET. The OCX error. I searched on computer, found MSINET. OCX in C:\Windows\System32 and pasted in C:\Windows\SysWOW64. The next attempt to run, I learned a COMDLG32. The OCX error. I searched that and copied and pasted. The next time I got a script error:

  Line: 1

  Char: 1

  Error: 'Text2' is not defined

  Code: 0

  URL: subject: empty

  He asks if I want to continue running scripts on the page but it won't let me not click 'Yes' or 'No' then he does not close unless I eject the usb key.  Customer Internet also later than December include people who executed him and those who is crazy, they can get it to run. I think that it runs with 32 bit Windows 7 but I don't know if it does.

  Anyone have any ideas?

  Hi Dona,

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you're the script error message when using Instant Internet TV/Radio USB Stick in Windows 7.

  Which web browser you are using?

  Please follow the steps in the link.

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• How I can run on 64-bit vista premium theme hospital

  When I try to install it it says 32 bit game not compatiable with 64-bit computer

  Hello stephbond69,

  Thanks for posting on the Microsoft answers Forum.

  It is a game that was intended for Windows 95, so I don't know if you will be able to install it on a 64 bit Vista computer.

  However, you can try a few things.

  Another Forum on the game:
  http://forums.techarena.in/Windows-Vista-Games/1082451.htm

  Jonathan March

  Re: Run 32-bit games on 64-bit Vista Ultimate Vista64 has a 32-bit compatibility layer to run 32-bit and 64-bit Apps/games. A few tips for the games under Vista in general, do not install games the default folder of Programs (X 86) as long as it is a protected and some older games cannot write their save games here, install the latest version of DirectX because Vista comes with Directx10 and a file is missing a few older games need (install the latest version of Directx will put this file) and in place) and some games need administrator Access (right click the exe of the game and select run as administrator). Lack of admin access may be your problem. I have HL2 on Vista64 and it works fine.

  http://PSX.IGN.com/objects/003/003747.html

  It is the homepage for Theme Hospital.

  I hope this helps with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run FIFO host vi

  I tried the example FIFO to http://zone.ni.com/devzone/cda/tut/p/id/4534 and built a very simple FIFO vi.  However, whenever I save after all after the application runs without a problem, when I open the project, host fpga and vi vi vi host cannot be performed.  However, if I open a new white vi and make copy / paste everything in the original host vi, the new program vi will be able to run again.  I'm confused, what's wrong with the host vi.  I have attached the fpga and host vi below and I have also attached a few screensnaps errors list.  It basically says that almost nothing is taken in charge by the current target.

  Another issue is that the parameter of timeout in the FPGA vi has unity 'beat of clock.  What exactly is the beat of clock and what is it in seconds?

  Are there any individuals books published by OR who have a complete teaching on FPGA programming that you can recommend?  We use PCI-7833R.

  Thank you much in advance.   I appreciate your help.

  You must join your project of LV with the rest of the files also. I think the problem is that your host VI is under your FPGA target in the LabVIEW project, which is not the proper context for the host VI. The VI of the host must always be under the point work stations, not the target FPGA.

  The reason I think this is your problem is that when I looked at your error 4 photo, it shows your host VI in the context of the target FPGA. You can find out by looking at the title of the window of the VI, you will see "on the analogue input 2-R Series.lvproj / FPGA target." I expect to see "analog input 2-R Series.lvproj / My computer.

  In summary, try moving your host VI out below your target FPGA and directly under the element of the workstation.

• No XP (service pack 3) or run as Administrator program compatibility options.

  Another issue is before you install a program that I downloaded, I right click it and go to properties > compatibility and under run this program in compatibility mode for: there is no option for Windows XP service pack 3 or run as Administrator option. It lists only older versions of Windows and Windows NT 4.0 (service pack 5). I doubled checked that my OS is XP (service pack 3) and my account has administrator privileges, so it's really confusing me! Any clarification would be much appreciated!

  -Eva :)

  Have you tried just downloading, just empty without trying to run it in compatibility mode? I don't think you'll find an xp in the drop-down list entry simply because you run a xp machine and there is no place to enter xp when you try to run a compatible software xp on a xp machine.

• How to run Lotus 16-bit on 32 bit XP Professional spreadsheets

  Lotus spreadsheets worked fine on XP Pro until I reinstalled XP Pro in a recovery facility.  Now, I get an error message that is not a 32-bit file.

  Hi FrankMcDonald,

  You can run the program in compatibility mode and check.

  How to use Windows program compatibility mode in Windows XP

  http://support.Microsoft.com/kb/292533

  I hope this helps.

• Cannot run Mechwarrior 4: vengeance on a Windows XP Home Edition Service Pack 3

  Original title: cannot run Mechwarrior 4: vengeance on a XP machine.

  I installed my copy of Mechwarrior 4: vengeance on a machine with Windows XP Home Edition Service Pack 3.  The game seems to install properly, no error, but when I try to run the game it just splashes image loading on the screen and then does nothing.  I have tried to install the latest patch/update from the site Web of MW4, tried running in compatibility mode, and nothing seems to work.  Any help on this will be greatly appreciated.

  Hi CloakingBrotter,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article in the Microsoft Knowledge Base and check if it helps.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Method 2: I suggest you check for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

   

  I hope this helps.

• HP Pavilion Slimline 400: Cannot run SFC/scannow

  I have a PC with Windows 8.1 x 64 which does not run the "sfc/scannow" command of HP Pavilion Slimline 400 desktop. When run from a CMD prompt window ("run as Administrator") the result returned is:

  "Windows resource protection could not start the repair service."

  I restored Windows 8.1 at the factory of HP with the same result.

  I tried using 'Online Dism/Cleanup-Image /RestoreHealth' and get:

  Maintenance of the images of deployment and management tool
  Version: 6.3.9600.17031
  Error: 11
  You cannot service a 64 bit OS with a 32-bit version of DISM.
  Please use the version of DISK that corresponds to the architecture of your computer.

  Anyone can get an idea as to why ' sfc/scannow' and the DISM command does not work?

  Thank you.

  I suspect that the recovery partition is corrupt and that it would have to use HP recovery discs.

  If you want to order and if you live in the USA/Canada, call this number 1-800-334-5144 HP and see if you can still get a set of recovery disks.

  I have another solution that doesn't cost anything.  You can download and burn an ISO of Windows 8.1 from the following site.  He won't get the HP software or bloatware, is a commercial version.  Have on hand your license key:

  http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

  If you can, back up your data.

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.