cannot scp vSphere Management Assistant

I just installed, web ui work flawless but winscp or ssh error while trying to connect with vi-admin. What Miss me?

Error of WinSCP and putty is: server unexpectedly closed connection network

Since the vMA console, you can try the fix mentioned in the thread below.  Just open the console of your guest vMA and press Alt - F2 to open a session

vMA 5 unable to SSH

Tags: VMware

Similar Questions

  • Cannot start vSphere Management Assistant

    Hi all

    I imported "vSphere Management Assistant" on my server for vSphere ESXi 4 by url. But when I turned on him, it says "your cpu does not support long mode. Use a 32-bit distribution". I don't know if my host server has a 64-bit processor. I change all parameters before VSMA lit. Please advise, I will be really grateful.

    Your CPU has both VT and EM64T? and if you recently enabled VT, you will need to issue a complete system for VT power cycle to take effect.

    You can also check this by looking at this: troubleshooting problems of Intel VT - x

    To run the vMA, that do not have 64-bit capable CPU to as vMA is a 64-bit guestOS

    =========================================================================

    William Lam

    VMware vExpert 2009

    Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    150 VMware developer

    If you find this information useful, please give points to "correct" or "useful".

  • VSphere Essential Kit a vSphere Management Assistant?

    Hi all

    We currently have a project that requires vsphere Management Assistant to the ESXI stop server when there is a power failure.

    I need to know if the License Essential Kit have this Management Wizard vSphere feature?

    Thanks so much for anyone who can help me to answer this question.

    Wen Qi

    Hello

    VSphere Management Assistant (vMA) is free to anyone.  You can download it in the tab drivers and tools of my.vmware.com.

    All the best,

    Mike

    -----------------------------------------

    Remember to mark this reply 'proper' or 'useful', if you found it useful.

    Mike Brown

    NetApp, VMware and Cisco data center guy

    Consultant engineer

    [email protected]

    Twitter: @VirtuallyMikeB

    Blog: http://VirtuallyMikeBrown.com

    LinkedIn: http://LinkedIn.com/in/michaelbbrown

  • Cannot enter gateway ipv6 address while booting in Vsphere Management Assistant

    Hello

    After you deploy the model to the FVO, I have to configure the network settings for the device of the VMA. When you try to put the default gateway, I have to configure an ipv6 address. As we don't use ipv6, I tried to enter private ipv6 addresses, but I keep getting errors.

    VMware_ipv6.PNG

    The documentation states:

    If you use a static IPv4 network configuration to configure the IP address, DNS, default gateway and hostname, you must also configure the IPv6 default gateway when you first start network set up, otherwise the vMA may be inaccessible from the network after the connection.

    No help for configure this VMA is very appreciated!

    Friend

    WIllem

    Able to proceed to the configuration of the network after a reboot of the device of the VMA.

  • VSphere Management Assistant freezes during execution of scripts Perl SDK

    In our environment, we have a nagios server which connects to our Executive Assistant to check the health of our host ESX 4.1 vSphere. Scripts are pretty basic and just run over SSH using cryptographic keys every 10 minutes. The problem is that after a day or so to work properly the VMA one freezes and unresponsive. I am at a loss here as to what is causing this problem that I made sure to always disconnect the server vSphere when scripts are finished. Anyone who has met by this kind of problem before?

    Here is one of my scripts for reference:

    check_cpu:

    #!/usr/bin/perl -w
 
use strict;
use warnings;
use FindBin;
use lib "$FindBin::Bin/../";
use VMware::VIRuntime;
use VMware::VmaTargetLib;
 
my $host = $ARGV[0];
my $warn = $ARGV[1];
my $crit = $ARGV[2];
 
if ( $host eq '' || $warn eq '' || $crit eq '' )
{
        print "Usage:  check_cpu <SHORT HOSTNAME> <WARNING LEVEL> <CRITICAL LEVEL>\n";
        exit (0);
}
 
my $target;
 
$target = VmaTargetLib::query_target("vcenterserver.***.****.****");
$target->login();
 
my $entity_views;
 
&main();
 
sub main
{
        &get_views();
        &get_cpu();
}
 
sub logout
{
        $target->logout();
}
 
sub get_views
{
        $entity_views = Vim::find_entity_views(
                                                view_type => 'HostSystem',
                                                filter => { 'summary.config.name' => "$host.***.****.***" },
                                                );
        if ( @{$entity_views} == 0 )
        {
                print "Error: Host does not exist! Exit 2\n";
                &logout();
                exit (2);
        }
}
 
sub get_cpu
{
        for my $entity (@{$entity_views})
        {
                my $status = $entity->runtime->standbyMode;
 
                if ( $status eq 'none' )
                {
                        my $totalMhz = $entity->summary->hardware->cpuMhz;
                        my $cpuCores = $entity->summary->hardware->numCpuThreads;
                        my $cpuUsage = $entity->summary->quickStats->overallCpuUsage;
 
                        my $cpuPerc = ($cpuUsage/($totalMhz*$cpuCores))*100;
 
                        if ( $cpuPerc < $warn )
                        {
                                print "CPU at $cpuPerc\%. Exit 0.\n";
                                &logout();
                                exit (0);
                        }
                        elsif ( $cpuPerc < $crit )
                        {
                                print "Warning! CPU at $cpuPerc\%. Exit 1\n";
                                &logout();
                                exit (1);
                        }
                        else
                        {
                                print "Critical! CPU at $cpuPerc\%. Exit 2\n";
                                &logout();
                                exit (2);
                        }
                }
                else
                {
                        print "\tHost $host is in standby mode. Exit 0\n";
                        &logout();
                        exit(0);
                }
                print "\n";
        }
}

    Thank you

    You monitor the execution of your hosts vMA during execution of the script? By default, it is configured with only 1vCPU and 512 MB of memory, based on the query and the size of your environment it may be running out of resources that I saw myself, and generally I'll upgrade the memory to 1 GB, if not slightly more depending on what he does. It's probably a good idea to take a look at the performance of your vSphere environment and see what it consumes and if the system is swapping or pegging on CPU.

  • Impossible to run a command with the Vsphere Management Assistant

    Hi all

    I have a little problem.

    Soon I'll have to do a new iscsi infrastructure to access my SAN then I read 'VMware-iSCSI-SAN-Configuration-Guide '.

    I saw that I must use VSphere Cli, so I downloaded it

    After you have installed the VMA in my Virtual Center, I configured it like that.

    "vifp addserver my esx Server - username" to add one of my ESX "vifptarget s myesx server" to connect the roof then it works.

    The only problem I have is that the esxcli swiscsi nic list d vmhba33 command does not work.

    In fact he told me to put a username and password but I don't know what login and password to

    I tried to put the root password it work not so can you help me?

    So as you can see, you're not a guest for the user and password name which was the original question.

    There is no mistake that you touch currently, your order is probably out the correct information, as it is probably no output for this command from your swiSCSI cannot be configured correctly.

    Take a look at this blog about Multipathing iSCSI and esxcli post - http://www.yellow-bricks.com/2009/03/18/iscsi-multipathing-with-esxcliexploring-the-next-version-of-esx/

    Please mark this question an answer because your actual issue are not related to the vi-fastpass as you see it works and post a new thread if you have any other questions around iSCSI installation and use esxcli program.

    Thank you

    =========================================================================

    William Lam

    VMware vExpert 2009,2010

    VMware VCP3, 4

    VMware VCAP4-DCA

    VMware scripts and resources at: http://www.virtuallyghetto.com/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • vSphere Management Assistant - add users - help please

    I'm looking to set up the vMA to use other accounts of users more I have not use Active Directory to Microsoft, will create local accounts on vMA and give permissions on the file sudo.

    Someone did he do this type of configuration that could help me in this procedure?

    Thank you!

    Possible Yes... follow it

    VMware VMA customization 5 | timcarr.NET

  • After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    Get the error message...

    [[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
    [[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
    [[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
    [[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
    [[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

    Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    Contact VMware support if necessary.

    System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

    to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

    to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

    to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

    System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

    to VirtualInfrastructure.Utils.ClientsXml... cctor()

    System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

    ...

    to System.Xml.Serialization.XmlSerializer... ctor (Type type)

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

    -End of the exception stack trace internal-

    -End of the exception stack trace internal-

    After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

  • Cannot start HP Support Assistant,

    Cannot start HP Support Assistant - always get the message "HPSF.exe has stopped working" and need to close.  I have a HP TouchSmart 610 running under Windows 7 64-bit.  TouchSmart works not properly, but used to work.  Cannot start webcam either.  I totally lost to the search on the HP website for a solution.

    The version that is in your Web page - and that I gave you to date is an update only.

    Rats.

    Search your Recovery Manager for the original software:

    • Start > search / type "Recovery Manager" > click here to open the program
    • You want "Immediate aid" and search for "reinstall drivers and Applications.
    • Wait for the list to build...
    • Search for HP Support Assistant - version, of what I can extrapolate from what I see now, should be a version 5.x - perhaps 5.1.x or 5.2.x
    • When you find HPSA, reinstall it.
    • Reboot the system after installation.

    Assuming that installs it the software (from the Recovery Manager), you can then use

    sp54931 V6.1.12.1 HPSA Rev A

    update the software and take advantage of the fixes contained in this package.

    ==================================================================================

    I can't find the original HPSA to your exact system type.  I hope you find your software in your Recovery Manager.

    I find the reference to the last update - 7.0.39.15 revision A

    I heard that, in some systems, version 7.x has exposed problems (constant reboot requests).  This will be fixed by HP and it won't be long until the issue is resolved.  Your system may not even be affected - you can always try it later if the current problems are resolved.

    If the original HPSA software is not in the Recovery Manager, it can be elsewhere in your system...

    Let me know.

    If all else fails, we could try HPSA for a similar system of TouchSmart - the worst it will do is not installed.

  • I forgot my ID Windows Live ID and cannot connect to manage my website. Anyone know how to recover a forgotten or get a new one that will allow me to access my site?

    I forgot my ID Windows Live ID and cannot connect to manage my website. Does anyone know how to recover a forgotten or the steps I must take to get a new one that won't let me access my site?

    Post Windows Live questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

    could not access vb run time for custom action script

    I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

    Hello

    I suggest you run the fixit and see if it helps:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Also check out this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

    It will be useful.

  • Cannot open Microsoft Management Console mode author because of current computer policies

    Hello, I use Windows 7 Ultimate 64 bit.

    When I type "mmc", I get the following error. I am logged in as administrator.

    ---------------------------
    Microsoft Management Console
    ---------------------------
    You cannot open Microsoft Management Console mode author because of current computer policies.
    ---------------------------
    Ok
    ---------------------------

    Is this a normal behavior of the default Windows 7? If so, how to launch mmc or not if yes, how can I find the setting that causes this message?

    I found the parameter restrict access, which has been the Local computer policy > User Configuration > administrative templates > Windows components > Microsoft Management Console > prevent the user from author, Enabled.

    When I turned this option off, I could run mmc.

  • Esx3 with Vsphere management

    We have an existing vmware cluster managed by vcentre 2.5, add a new cluster that will be vsphere, we were wondering if we can manage the current environment of the new VSPHERE management console, is compatible? or we have to separate management for different flavors consoles?

    Hello!

    You can manage VI3 with vCenter 4, you can also mix ESX3 and ESX4 in infrastructure. We have improved vCenter 2.5 to 4 successfully. It allowed us to keep our statistics and configuration, and so far we have not had any significant problems.

    concerning

    Martin

  • ADFC-10004: cannot set property managed bean "autoquery.

    Hello

    I'm trying to deploy and run an ADJ application that was built with JHeadstart. Initially, I came across the question which the application appears to hang in the browser when I first tried to see. The URL change the request parameter and a reload triggered JavaScript happens constantly - page content is empty. I could solve this problem by using the suggestion offered in this thread:

    Re: JDeveloper 11.1.1.2 group patch

    After the page is loaded (Yes!), but when I tried to load the next page making connections to database tables, I get this stacktrace and the page remains empty:

    Caused by: oracle.adf.controller.ControllerException: ADFC-10004: cannot set property managed bean "autoquery.
    at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:184)
    at oracle.adfinternal.controller.beans.ManagedBeanFactory.setSimpleProperty(ManagedBeanFactory.java:316)
    at oracle.adfinternal.controller.beans.ManagedBeanFactory.setManagedProperties(ManagedBeanFactory.java:262)
    at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:203)
    at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:860)
    at oracle.adfinternal.controller.state.ScopeMap.get(ScopeMap.java:82)
    at javax.el.MapELResolver.getValue(MapELResolver.java:164)
    at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
    at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
    at com.sun.el.parser.AstValue.getValue(AstValue.java:118)
    at com.sun.el.parser.AstNot.getValue(AstNot.java:46)
    [snip]
    Caused by: java.lang.NoSuchMethodException: unknown property 'autoquery.
    at org.apache.commons.beanutils.PropertyUtilsBean.setSimpleProperty(PropertyUtilsBean.java:1741)
    at org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(PropertyUtils.java:577)
    at oracle.adfinternal.controller.beans.ManagedBeanFactory.setSimpleProperty(ManagedBeanFactory.java:308)
    ... more than 232

    I checked in JDeveloper properties JHeadstart ask "Change the JHeadstart Application definition". Looking at my details group values, I see that the "automatic query" is checked in all cases. I tried to remove the check mark and redeployed, but the same error happens again.

    At the moment I don't know how to debug this more. The last error is possibly caused by the fix that I applied (removal of the filter to ADF faces)? Any ideas how to proceed are welcome. :)

    Environment:
    JDeveloper Studio Edition Version 11.1.1.2.0
    JHeadstart 11.1.1.2.37
    WebLogic 10.3.2.0, running locally on my Windows XP machine

    To start, can you still run the application within JDeveloper?
    Second, switch to a later version of JHeadstart recently?

    In the past, the JhsSearchBean used to have an autoquery property. If your managed bean definition still contains this property, you get the error you mentioned.
    You must remove this property of any beans that are controlled using the JhsSearchBean class.

    Steven Davelaar,
    Jheadstart team.

  • VIMA (Virtual Infrastructure Management Assistant) - cannot add DNS nameservers to the VM management

    I can't add DNS nameservers on the virtual management computer...

    VI-admin account doesn't have access to add DNS entries?

    1 tried to run system-config-network GUI...  No line to get into the DNS

    2 tried to add names to /etc/resolv.CONF... Denided of access when you save the file

    3 tried to change /etc/resolv.conf rights... Access denied

    4. I tried entry creating host...  Access denied when you save the file

    It is a network appliance and VMware off the root account.

    Any ideas?

    sudo vi /etc/resolv.conf

    Update (search domain1.com domain2.com)

    Update (nameserver x.x.x.x)

    Update (nameserver y.y.y.y)

    -KjB

Maybe you are looking for