Cannot search external H.D.

Similar Questions

• My Aspire V7 582PG cannot detect external monitors

  I recently bought an Aspire V7 582PG, put in a new SSD and then installed Windows 8. The laptop works well, except that it cannot detect external monitors (in Control Panel, I get "Has not detected a different view".) I tried with 2 monitors (different models) that are known to work, via HDMI and VGA.

  I thought it might be a driver problem. Device Manager > 'Graphics cards' show 'Display card base Microsoft' and 'NVidia GEForce GT 750 M. The two drivers are up-to-date. 'Monitors' shows 'generic PnP monitor", which is also updated.

  Then I went to http://us.acer.com/ac/en/US/content/drivers to download the driver for my model. The only one who had the relevant air was:

  Monitor

  ELANTECH

  The HID monitor drivers

  1.1.5

  Installer here: http://global-download.acer.com/GDFiles/Driver/Monitor/Monitor_ELANTECH_1.1.5_W8x64_A.zip?acerid=635...

  But when I unzip and run the Setup window closes a few seconds; I think it hangs, rather than installing correctly.

  Any suggestions?

  My Acer tabs they need additional drivers to recognize the HDMI port.

  I think having unzipped in a directory and open a DOS window with admin rights and run the application inside that. At least if an error occurs, you should be able to see. Sometimes just doubleclicking opens and closes a window so fast that you do not see the error.

  Also in looking at support for a 'ultra' V7, I see several drivers for the chipset VGA and monitor. All may be required for the video display to work.

  You see multiple devices when you press Windows-P?

• Cannot search for windows update, error800700B7

  Original title: Vista 2. Windows Update says first major update but cannot search updates. I get error code 800700B 7.

  I fight with my laptop Acer Aspire 5313 since before the new year, trying to get my Media Player to work... trying to get my updates to load and I finally did a restore disk in desperation. I noticed when I did restore the Version of Windows Vista Home Premium it restored to was that for Service Pack 1, it should have been 2 Pack and registration of license # is different from that on the Windows label on the bottom. I downloaded the Service Pack 2 of MicroSoft.com as my laptop came with ANY disks and I thought I'd finally be able to perform the necessary updates and get at least my laptop up and running again as it was before the problems started. When I try to get the updates, it says I must first update Windows Update. I try to update, update and get tells me it can not search for updates. error code 800700B 7. Help! Please...

  Hello
  You can follow the steps and then check.

  Step 1:
  You can try to disable the antivirus installed on your computer software.
  You can see the following link.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
  You can try to reset the Windows Update components. Read the following article.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   
  It will be useful.

• Cannot search updates. error C8000210.

  Windows cannot search for updates. I get the C8000210 error code. He says its an unknown error.

  Try the fix on this page: http://support.microsoft.com/kb/971058

  I hope this helps!

• I have search on, but cannot search.

  I have search on, but cannot search.  If I click on start, then try searching, I tap and nothing happens.  Search for libraries, I type in the search box, and nothing happens.

  I have search on, but cannot search.  If I click on start, then try searching, I tap and nothing happens.  Search for libraries, I type in the search box, and nothing happens.

  ================================================

  The following links may be worth a visit:

  (ignore the downloads and simply read the tutorials)

  Windows 7: Windows 7 search is not working properly.

  Windows 7: Windows Search - configure and use

• Yosemite projector cannot search seagate external hard drive

  Hello

  I have a 8 TB of seagate drive known as of the "external Seagate backup Plus."

  I formatted the drive in ExFat, and I have no problem reading or writing to the disk. I'm on a Macbook Pro running OSX Yosemite 10.10.2

  * The problem is that Spotlight does not search this disc.

  Please can anyone help solve this problem?

  I searched the Web for a few hours now, without success.  I also tried adding and removing the player preferences-> spotlight-> Privacy tab.  But it does not work

  Thanks in advance!

  Best

  Michael

  Looks like you need to re-index the disk- http://www.cnet.com/news/spotlight-search-not-working-on-external-hard-drive/

• 8024402 cannot search the updates of Windows

  Hello

  Vista 64 HP with many problems. Has been purchased already installed by manuf. may 2009. Sent to them Jan 2010 to recover or reinstall the operating system due to the loss of the ability to install/uninstall programs after SP2. Now Windows Update (among many other things) has stopped working (apparently since March), even if the update is set to automatic. When I try manually 8024402C error code stops the attempt and it says that Windows could not search for new updates. Also, since on 25 March, I have been unable to use Windows Live Mail (freezes) and McAfee Site Advisor stopped working but is not disabled. Also have problems copy photos or documents and from my external hard drive; photos say the missing properties. Cannot change the documents if they are on my external (although I can change if external is connected to my Windows XP computer).  I disabled my antivirus/spyware/firewall and tried UPDATE but still the same error. I have been seeking assistance with Windows Live Mail since the start of freezing March 25 and isn't odd that UPDATING claims is the last attempt made on 25 March 2010 at 05:35 and the latest updates of installed Windows were as of 03/23/2010 at 06:53. What has been actually updated the 3/23 was "IE 8 compatibility view for WinVista 64 list based systems (KB980302) but I've seen compatibility disabled (unchecked). Windows has updated anything since 23/03/2010.

  I am totally frustrated with HP64 Vista. Help, please.  Thank you

  1. McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. See if this triple McAfee fix solves the problem: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NB: #1 correction of the triple step has you uninstall the McAfee application. After that, make sure that the Windows Firewall is enabled.

  NB: Keep this useful link. Chances are that you will have to redo the fix three steps every time that the McAfee application is automatically upgraded to a newer version.

  2. now run this difficulty in default and aggressive modes: http://support.microsoft.com/kb/971058

  3. restart & test.

  Comment: Little, if any, security experts have a very good opinion of these ISP freebies.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot eject external hard drive USB

  Original title: problem ejecting usb mass storage device

  Hallow

  I have a WD drive and when I try to remove it safely I get the following error:

  "the application".

  '\Device\harddiskvolume4\Windows\System32\svchost.exe' is

  This device can be stopped. Close the application and

  then try to stop the device again.

  p. s.

  I have important data on this disk

  This error does not occur with any other usb

  I tried the Task Manager

  throws his mercy on me I'm not a computer genius and

  my English is not the most brilliant as you have probably noticed

  Thank you to everyone willing to help

  Itay

  Hi Itay,

  Thanks for posting on Microsoft Community.

  I understand that you get this error "the application \Device\HarddiskVolume4\Windows\System32\svchost.exe prevents this device to be stopped. Close the application and then try to stop the device again. "Whenever you try to eject the external hard drive.

  You may get this message if Windows was started with the inserted disc. Try to wait until Windows is completely loaded before inserting it, then if you try to eject it doesn't work.

  You can try the suggestions below and check if it helps.

  1. Download Process Explorer from the link below http://technet.microsoft.com/en-us/sysinternals/bb896653
  2. Click search, find handle or DLL (Dynamic Link Library) in the tool menu.
  3. Type the drive letter of the USB device in the handle or DLL substring text box and press the search button.
  4. Find the process and its PID (process identifier) in the following box.
  5. In the tree of the system process, find the process according to find it handle or DLL dialog box.
  6. Press Ctrl + H to display the handles in the view in the lower pane.
  7. Search for the file by the drive letter and right click, choose Manage close.

  Reference:

  Problem ejecting USB mass storage device

  http://support.Microsoft.com/kb/555665

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to contact us for any further assistance on Windows.

• cannot detect external display

  I updated the BIOS of my laptop HP Envy 2 months ago automatic update of HP. After that, it cannot detect the external moniitor. Rather the external screen shows "No Signal." for once and not display more. I tested the external monitor and a HDMI cable using another computer laptop and found works well. Help, please.

  I downloaded the latest update of the BIOS on the HP support site and installed. Problem solved - external monitor works.

• Cannot search users

  When I click on the menu 'Add a contact'-> "Skype search directory", nothing happens. Therefore, I'm completely unable to add contacts.

  No error messages, nothing. It does not appear that the program does nothing either. Does not help restart. This problem persists from an old version and update did not help.

  Windows 7 Skype 7.2.0.103

  No new window should now activate when you press "Add contact"-> button "Skype search directory. The cursor is placed only in the search box, where you can enter the search text.

  http://community.Skype.com/T5/Windows-desktop-client/I-cannot-add-contacts/m-p/3773423#M312743

• Cannot load external hard drive .itl file

  I'm trying to migrate my itunes to an external HD to new computer, Windows 10.

  The old computer had reached a miserable end of life due to obsolescence and lack of resources.

  For example, shortly before he died, I thought how to move all files including the media and the. ITL and the. XML for the EHD files.

  It seems that this may have complicated problems for the current process.

  The former. ITL file is there and intact. I try to IMPORT PLAYLIST, which is the closest thing to what I think I need, and it says that the file cannot be imported because it doesn't seem to be a valid exported file.

  I try to import the .xml and it is said that some of the songs in the Itunes music library file were imported not because they are not found. It means everything.

  I tried to hold the ALT key and open Itunes, as seen somewhere, but it's apparently a MAC function only. Windows opens a properties box, will not open the program and allow selection of the library as described.

  I also just tried dragging the .itl file itunes such as discussed in migrating to a new computer, but appears not to work either.

  If the old computer worked in anyway I will try to export the file. But alas, this is not an option.

  I currently complete my collection, but any piece of data has disappeared. I would really like to return?

  Thanks for nothing.

  Frank

  Hold down the SHIFT key while you start iTunes.  When you arrive it is fast:

  

  Click choose a library... then navigate to and select the iTunes Library (.itl file) hard disk external.  This is the only way to get iTunes to use a specific library - import, a double click, etc. have no effect.  Once you've done this iTunes will continue to use the library selected (without having to use the SHIFT-Start option) so that the external hard drive is connected and its drive letter does not change.

  You may need to check the layout of your iTunes library on the external HARD disk is correct - it should be like this:

  

  More specifically, the iTunes Library.itl file should be in the folder that contains the iTunes Media folder.  See tips to the user of turingtest2 on do a split cell library for more information.

• Cannot find external hard drives - Windows XP Media Center

  I just got a new external HDD two days ago in the case where my old drive never fails. I have connected both to my laptop and copy all my old files from the old drive to the new. Yesterday, I clicked on 'Stop' under 'Remove hardware safely', and both readers suddenly stopped being recognized by my computer. When I plug in, they light up and run, but their records are not displayed in my computer. I don't get any error message (or any kind of message), but they always show upward under Device Manager. I tried to move the USB cables, restarted my computer, update device drivers, do a system restore and run a virus scan (some files on my drive C: disappeared recently, however, the scanner found nothing). I also tried to attach external hard drives to other computers, but they are still not recognized. Please help - I have files that cannot be replaced and the new cost of drive hard $100, and I don't want to go through the hassle of trying to get a replacement without warranty or invoice.

  Hard drives not recognized in all other computers as well? There lies the problem.

  Try to connect to some other computers (XP, Vista or 7) and see if the problem repeats.

  If so, your disks are dead (because no computers detect them).

  Download and run the utility to diagnoses of the Web site of the manufacturer of the hard disk to check for disk errors.

• Cannot access external hard drive after changing the drive letter in vista

  The drive letter for my external hard drive has changed itself, I have tried to change the letter back to what it was, but still cannot access the drive.  Diving is in my computer, but when I try to open it it tell me I need to format.

  Hello

  I suggest you to contact the manufacturer of external hard drive for better assistance.

• Computer cannot search updates

  I get an error message for the few weeks that my computer cannot find the updates. It comes with the error code 80070005. I tried to find answers under this code without success. I tried the automatic "fix - it" who does not work either.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

• cannot use external hard drive 1 TB for readyboost

  can I use my 1 TB WD external hard drive (fat32) for readyboost... I have win 7 home premium (64-bit) & 2 GB of RAM right now I get a message saying that this device (1 TB drive) cannot be used for readyboost... but I can easily use readyboost when I insert my 4GB kingston USB...

  To see the true performance increases you'd be better by upgrading the amount of RAM you have. I am surprised that you have Windows 64 bit with only 2 GB of RAM...