Cannot see wireless LAN available on Tecra A5 but ok with Tecra M5

Similar Questions

• Cannot see wireless networks

  Hello

  I have checked through some of the forums, but couldn't find an answer that helps me, so I post here.

  I am running Vista Home Premium SP2.

  Until this morning, my wireless worked fine. Today, my laptop is unable to connect to any wireless network. I make sure that my router works fine (I am connected via my phone), my device driver is showing no problem in device manager, and my wireless switch is turned on. All other configurable in Control Panel Network is set to automatic.

  Any help is appreciated.

  Thank you.

  Hello

  Maybe this can help.

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  If all the foregoing is OK and it does not connect to the wireless router. Journal from any computer that is or may be connected to the wireless router with a wire, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security .

  When the work turns on the Wireless security.

  * Note, people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  ---------------------

  Stack TCP/IP work should look like.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  --------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite P300 and Win7 - cannot see wireless networks

  Hello

  I have Toshiba Satellite with Win7x64 and I bought on eBay an AR5008.

  If I boot Linux I can connect to wireless networks.
  However if I boot in win7 that I can't even see wireless networks. If I run diagnostics I get the radio is turned off.
  Even with ConfigFree I get the same message, even if the switch on the front of the laptop is on.

  What can I do? I tried all the drivers!

  Hello

  Normally, you can enable or disable the WLAN connectivity by using the equipment and the FN + F8 key combination switch.
  Did you check that?

  I guess for the FN + F8 key combination you need value-added package. You can download it on the Toshiba site.

  Last but not least, works WLAN with preinstalled OS from Toshiba?

• Satellite C660D - cannot install Wireless Lan / WiFi driver

  recently I had to reinstall a satellite c660d (amd processor) with windows 7 from dvd. installation disk hard form was not possible more. Problem is that I can't install a driver from networkcontroller and also card wireless network does not work. I tried to install several drivers (also driver wireless lan) form Toshiba site but without success.
  Internet only works with cable. Can someone tell me what drivers/software I need to install in order tot install the good networkcontroler and wireless lan?

  Did you sort it? Mine is same after windows 7

• Toshiba 46TL938G: my laptop cannot find wireless LAN using Intel WiDi

  Hello

  I have the Firmware of 46TL938G more recent (January 2013)
  and a Notebook DV7 Intel N2230 with Intel Wireless Display support (latest updated drivers)

  The TV or laptop may not find connection to each other.

  Anyone work?

  What should I do?

  Did follow the steps described in the manual user 60 page?
  If this is not the case, check it!

  The user manual here:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF

  Also, you must ensure that your s notebook LAN card is Intel WiDi supported.
  Make sure that you use the latest Intel INTEL PRO wireless and Intel WiDi

  Here another thread of this forum on the use of the Intel WiDi:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71343

  Your comments would be appreciated

• Equium A200-15i: cannot see wireless network adapter

  Hi all.

  I tried to install the drivers on my laptop wireless without a bit of luck.
  My network card works, and I can connect to the internet via ethernet. But wireless doesn't work at all.

  I checked under network adapters and Device Manager, it shows realtek fast ethernet nic and 1394 network adapter.
  In the other devices section, it shows Ethernet controller... I tried to score for the drivers that I downloaded but it says "no new pilots could be detected.

  I hope someone can help
  (also - wlan is enabled in the laptop, but nothing happens - and it only shows my connection to the local network in network connections)

  I see that your wireless network card is not mentioned under network adapters in the Device Manager and so I m 1005 sure that Wlan card driver was not installed.

  I think that you were unable to install it because you used all just a bad driver!
  Equium A200-15I belongs to the * PSAE2E * series.

  Please check that you have chosen the right notebook series and downloaded the correct driver.
  As far as I know this unit should support the card of XB63L Wlan Atheros 11 b/g (13ch).

  Good luck buddy

• WRT1900AC cannot see Wireless Bridge

  Hi all...

  I have a WRT1900AC (FW 1.1.8.161917) the router and wish to connect a wireless bridge that is connected to my DirecTv box.  I have an old WRT54G ver 3.1 running DD - WRT which I did in a wireless bridge.  I have good connectivity to and from the DirecTv box, but no connectivity to my gw wireless which is my WRT1900AC.  The WRT1900AC can't see the wireless gateway that is.  I have triple checked that I have the identifier SSID is correct and the security in the WRT54G wireless setting and even tried to use an old bridge G from Linksys to connect wireless and the exact same problem occurs when.  No device can see other wireless.  I suspect the WRT1900AC as the source of the problem.  Wireless gateways both try to connect 2.4 Ghz radio.

  Any ideas?  Thanks in advance.

  -Andy

  Reset the DirecTV box and we're ready now.

• Vista: Cannot see wireless networks - I know they are there.

  I'm contracting at Microsoft and just installed the company issued IT Vista. Everything works fine: I joined the appropriate domain and can access all internal servers and the Internet with the ethernet cable is plugged.

  However, I don't know how to jump on the wireless network. My host OSX (10.5.6), I see the Microsoft WLAN airport is accelerating. Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  VMWare Tools are installed, and Device Manager shows my NIC is "Intel Pro/1000 MT Network Connection. I use the connection of NAT in Fusion. Diagnosis of the problem in Vista, he said: it is not an installed wireless device.

  Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  It does not exist. Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > Machine virtual Basics > virtual hardware specifications

  If you need to post by connecting to WiFi since in Vista then you will need to install a 3rd party USB WiFi NETWORK adapter in the Virtual Machine in Vista.

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Re: Satellite L450D-128 - cannot activate wireless LAN

  Hello

  This laptop specific doesn't have a wireless to turn on/off switch. I can't seem to be able to locate the "wireless" on the Control Panel, in order to enable it.

  Help, please!

  Hi lil_red_rose,

  The laptop doesn't have a WIFI hardware switch, but you can use the combination of keys FN + F8 to disable/enable the feature WLAN.

  Also if the wireless network adapter is not recognized, press the key combination mentioned above to activate the wireless network card.

  Check this box!

• Linksys WPC55AG, WPC54GX on wireless LAN, "connected to the AP, but Internet is not found.

  Aloha, finally a forum thar actually solves the questions, mahalo.

  These two wireless network adapters used to work properly with my DSL modem Westell 7500. Now, not so much.

  I can wire Enet cards pcmcia network very well. I see my Brother MFC885CW wireless printer.

  I'm on a gateway 9100, Win2k, Service Pack 4 running.

  Linksys utilities show that I received, but do not send bits.

  ipconfig gives 0.0.0.0 for the IP address auto configuration

  I looked at the parameters of the DSL router, I don't see anything strange of course.

  I also use wireless MAcBook Pro, airport, very good works. Hmm

  Any thoughts?

  The WPC54GX allowed ascii/text in box 1 WEP key, the WPC55AG has failed, only hex characters. However, after a search fast on another computer, I found an alpha decoder spell and managed to enter the WEP key in hexadecimal form, which I was able to confirm the MAc RPN calculator. Network cards do not seem to do the conversion correctly. I knew this because of my string of characters in the password.

  Also, the dual-band has been assigned, when he did at all, a "unrelational", (best way to put it) the IP address of 169.254.81.145, instead of a 192.168... as I was expecting.

  So with a little effort, both network adapters are now connected to the internet, and ipconfig shows well, as valid information.

  Some once said that I spoke in hex, there you have it.

  Thank you very much, I would say that the problem is solved.

  Aloha

• Cannot print wireless hp c7250 laptop running XP, but allows to print from the laptop running Windows 7. Why?

  The printer is installed and will print local but not wireless.

  Hi willhey,
   
  -You receive an error message while trying to print from Windows XP computer? If Yes, indicate the same.
  -Have you been able to print from Windows XP computers with no problems before?
  -Have you installed the printer driver on your Windows XP computer?
   
  Post back with more details to help you help the better.

• Satellite Pro L40 with realtek card: cannot see wlan Vista networks

  Hey

  You just bought the L40 (Realtek card) and it cannot see wireless networks. The diagnosis of Vista, is that the wireless adapter must be turned on. Then, it will fail to start. Function key and F8 (wireless on/off switch) does nothing.

  The wireless router is well - connected to an XP machine. I can connect to the router without a problem by using an ethernet cable.

  Running on the latest Microsoft drivers.

  Pointers much appreciated.

  Thank you
  Frank

  Hello

  you turned on the wireless the case switch on "ON"? Maybe you forgot this one, and this is perhaps the reason why it won´t work.

  Please check and make sure that you then use the FN + F8 switch.

  Would appreciate your comments on this...

  Welcome them

• for 17-e118dx wireless LAN driver

  I bought a new 17-e118dx and put Windows 7 on it. Cannot find wireless LAN driver. Can anyone help?

  Hello:

  You need this card driver wireless as specified in the parts list...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&DLC=en&LC=en&OS=4063&product=6521489&sw_lang=

• Intel WiFi Link 5100 network card - cannot detect wireless networks

  I have a HP Pavilion dv7-1270us. My wireless card is an Intel WiFi Link 5100.

  Running Windows Vista 64 bit, Ubuntu Linux, Linux Mint and Fedora Linux (various versions, all), the wireless works fine. My desktop computers to work with wireless cards to connect to the network work very well, and all computers (except mine) to connect to my home network very well; which means that it is not a problem with wireless networks, or with my network card. I try to manually connect to the network, but it can't find it. Diagnosis requires that the card is disabled, and that I should turn it on via the switch on my laptop running: fact.

  During the installation of Windows 7 64 bit, I cannot see wireless networks (and therefore unable to connect). Re-formated and reinstalled again, check the wireless connectivity between each batch of Windows Update, but it has never worked.

  I downloaded the latest drivers from Intel, via Microsoft Compatibility Center (version 15.2.0 driver).

  There is no system restore option because he has never worked as a first step, except in all other OS, I got on the computer. Microsoft Compatibility says the map is compatible, then Device Manager shows no problems. The network adapter is active via switch on my laptop.

  Happy that you guessed it sorted!