Cannot select the Dictionary view user USER_TAB_COMMENT?
Hello.I have this weird problem in 11.2.0.3
I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
If I try to describe it, I get ORA-00942 and ORA-04043 messages.
Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:
SQL> conn RODOLFO
Introduzca la contraseña:
Conectado.
SQL> show user
USER es "RODOLFO"
SQL> comment on table DOCUMENTILLOS is 'This is a comment';
Comentario creado.
SQL> select table_name, comments from user_tab_comments;
select table_name, comments from user_tab_comments
*
ERROR en línea 1:
ORA-00942: la tabla o vista no existe
SQL> desc user_tab_comments;
ERROR:
ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
SQL> desc all_tab_comments;
ERROR:
ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
SQL> conn / as sysdba
Conectado.
SQL> show user
USER es "SYS"
SQL> select owner, table_name, comments from dba_tab_comments
2 where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS'
3 ;
OWNER TABLE_NAME
------------------------------ ------------------------------
COMMENTS
--------------------------------------------------------------------------------
RODOLFO DOCUMENTILLOS
This is a comment
SQL>
Other users, I don't have this problemSQL> conn MANOLO
Introduzca la contraseña:
Conectado.
SQL> show user
USER es "MANOLO"
SQL> comment on table DOCS is 'This is a comment';
Comentario creado.
SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS';
TABLE_NAME
------------------------------
COMMENTS
--------------------------------------------------------------------------------
DOCS
This is a comment
Clues why this is happening?Kind regards.
elvegaa_esp wrote:
What do you think?
OK, the question is in the place where he is not pointing?
Edit:
Oh, it looks that it points to dba_tab_comments. Since your original post:
desc user_tab_comments;
ERROR:
ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
Who do not have the right of Rodolfo.
Thus, final to get rid of him.
And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.
Concerning
Peter
Published by: Peter on March 11, 2013 08:49
Tags: Database
Similar Questions
-
Whenever I try to download the dyes or open, something pops up saying: "Cannot read the dictionary of the application or extension because it is not be scriptable." This has happened and I need to get it resolved. Help, please.
What are pigments? What file format is it? Cam post you a screenshot of the window of information for it?
-
Cannot select the device scanner, AIO F380, MacBook Pro
Cannot select the device scanner, AIO F380, MacBook Pro
Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.
Duh!
Thanks for responding.
-
Cannot open the file resource user interface
Hi all
I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).
I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.
In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...
-
Cannot select the drive (NAS) on Windows Media Center
Original title: cannot select the drive (NAS)
My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet. The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC. In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option. What can I do to get the WMC to see the SIN? Is there another setting of mapping I should use?
Also, as a side note, there is no option to change the quality of the recording at all. Installer below. If any other information is needed, let me know.
ASRock m - itx E-350 APU/MB
Kingston SSD now V series SSD 30gig
Western Digital My Book Live 2 TB
Cisco/Linksys E2000 Wireless N Router
PCTV usb TV Tuner (HD capable) with on the HDTV antenna
Win7 PremiumRecord TV directly to a network location is not supported.
You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195
-
This is a double post of a following:
-
It is in this site http://pics.data.bg/zoom/albums/8f13e1013d12c622ea6b3962684c9828
on the image - right click > View Image > popup window > open with, the Do this automatically check box cannot be checked
Viewer - Infran View - I do select outdoor with > window navigation every time, this should be done automatically, but the box is grayed out
is there a solution?
Thank you
- Open in browser: https://addons.mozilla.org/firefox/addon/open-in-browser/
-
WIN8 cannot select the user when connecting more
I used to have the option to select the user to connect as but now I have a screen that says:
Press Ctrl + Alt + Delete or use the Windows Security button to unlock
When I hit Ctrl + Alt + Delete I get only the most recent user login. If I hit the left arrow right top left of the image, I must return to the Ctrl + Alt + Delete screen. There is no way I can see to select another user.
If the current user remembers actually disconnect from the screen Ctrl + Alt + Delete I am taken to a login with a choice of the users screen.
This used to work and I don't know if my 5 yo changed something or if a updated Windows did something. But my wife and son both need to use this notebook so I really need separate accounts.
I found a few long really complex stuff on the ' net on the definition of the strategy group and fiddle with the registry but I know my 5 yo did nothing like that.
How do I change back?
Dennis
PS what is the "Windows Security button" anyway?
I realized that I had recently installed Cisco AnyConnect VPN software to connect to the work. Which of - installed and now life is still happy. I will contact Cisco.
Sorry for the short reply above. Validation has been broken here earlier today and several machines at the same time making a response and a new post, I didn't type a bunch just to get the "Oops, something went wrong" again.
Dennis
-
Cannot find the exectable Viewer in a temporary file when I use image viewer
When I try to view a CD in the image viewer, I get a message saying 'cannot find the viewer in a temporary file.
Can someone help me with this problem?
Hi Robert,.
As a work-around, try to copy the contents of the CD player on the desktop and check if you are able to view the files.
If you encounter an error, please let us know the exact error message.
In addition, to give authorization to the Temp folder and check if it makes a difference.
The path of the Temp folder will normally be
\AppData\Local\Temp C:\Users\In order to locate the temporary folder in windows 7, follow the steps below:
- Click Start, in the search box, type CMD.
- Right click on CMD and select run as administrator.
- In the command line type ECHO %Temp%.
To change the permissions to the TEMP folder, follow the steps provided by John Rubdy in http://answers.microsoft.com/en-us/windows/forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed
Note: The steps also apply to Windows 7.
This is a step that has worked for some users who use CD xray viewer program.
Copy and replace the 2 files; 'CDViewer_11.04.0001' and 'sectra' in the case of non-functional account (on the user account where the CD can be read without any problem)
Location: C:\Users\
\AppData\Local\Temp ( where user name of the user account name you have connected)Note: you must copy the two files to a different user account where you don't have the files on the CD display problems.
Hope this information is useful. If you have any questions, please let us know.
-
After the removal of the malware "IE cannot display the webpage" - a user only
After removing various malware with Symantec Endpoint Protection 11, MalwareBytes 1.46 and the Microsoft Malicious Software Removal Tool, the user who received the malware (all detected instances are found on their profile or in the system restore points) can not access all the Web sites with IE 7:
"IE cannot display the webpage."
The administrator account, or another standard account have the problem.
I tried to open IE with 'no Add-ons' when you are connected to the consumer - same result.
I have reset the Internet Explorer settings on the tab 'Advanced' Internet Explorer (inetcpl.cpl) - same result.
Once more, the other two users can access Internet without problem.
The 'user' can access the network otherwise - e-mail, drives mapped to the server, etc...
One option: delete and re-create the profile of the user in question.
But before resorting to that, is there another option?
If I deleted Internet Explorer components in his profile, would they be recreated (correctly)?
System Restore is not an option, because the troubleshooting procedure indicated that we should delete because they could just bring back the malware. And indeed, the malware has been detected in several snapshots.
Have you tried to double check the proxy in Internet Explorer?
Try going to the Internet Option-> setting connection and LAN, check the setting and be sure to correctly configure other users.
You can also try to contact Symantec Support for more help with this problem.
-
cannot select the paper of 4 x 6 size
In the printing preferences, I can't select the paper of 4 x 6 size, not even using "custom" when you use Corel Photo Paint or MS Word.
I can do so when printing through Windows Photo Viewer, only problem is it that I get lines across the image, about a po.
Running Windows 7, printer is CP1518ni.
We recommend that you try the following:
Traditionally, remove the entries of 4 x 6, you have installed.
Then, set the name of your new entry 4 6 4 6 x
fixed 4 wide
duration set to 6
Press save
Click ok
We think that this should work for you
-
AlreadyLockedException: Cannot lock the file, another user holds the lock
I created the client application to web service using Jdeveloper 11.1.1.7 and deployed on weblogic 10.3.6 on cluster consists of 3 servers. The task of the application is to extract the data from the DB and push application external server permanently. Everything seems fine and works applications. The problem is with some message logs on all three servers.
I see the following stack of servers:
oracle.jbo.AlreadyLockedException: Houston-26030: unable to lock the file, another user owns the lock. [[
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1105)
at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:567)
at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8589)
at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:6237)
at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6756)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6943)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3301)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3106)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2108)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2389)
........
It is clearly stated that another process locks the record while the current process tries to lock the record even. Yet once obvious to say that the same application is deployed on three different servers (i.e. on the cluster) and each application tries to do the same task at the same time in each of the three servers with cluster.
Question: It is healthy to ignore this error? or I have to solve out?
I also checked this blog (Andrejus Baranovskis Blog: optimistic and pessimistic locking in Oracle ADF BC) he explains the difference between locking type available in the application model (optimistic and pessimistic). Will I change the lock mode in the request form for the client application that is mentioned to be optimistic rather than pessimistic? This will solve the problem? Is it OK to do with the behavior of the application who explained.
I thought about this a bit more and would not use temporary tables. Because the ADF does not guarantee that a session database is still used by the same am it will be difficult to control.
You can use a column in the table itself to write, for example, the name server that will manage the data before doing the real work.
Our you will find further information in the table that allows you to balance the work using this in a query. Sample would be a column id that allows you to select only the tires where the modulo 3 id is equal to 0, 1, or 2. In this way, it would be pointless to write something on the table before proposing the line as each server would see only the lines it is supposed to work.
Timo
-
Cannot select the fields to be used in a calculation field in Acrobat XI
I am running Acrobat XI on Windows 10 and set up a form. I'm having a problem with the implementation of a field to make a total calculated.
The first field has the user to enter the number of widgets sold. The field is formatted as a decimal number.
The second field is the user to enter the price per widget. This field is formatted as a number to 2 decimal places.
I want the product of fields one and two for appear in zone 3, which also in the form of a number to 2 decimal places. When I opened the box of 3 field properties and go to the tab calculate and select value is the product of the following fields and click the Select button, I can see fields 1 and 2 in the field list, but by clicking on the buttons to select them does nothing, that is, I can not select the (or any other area besides). The boxes stays white when I click on them.
Clay
It is a frequently asked question.
Acrobat has not the point of sense and the box always aligned for all systems. Fortunately most computer operating systems use the space as an activator of selector key. If it highlights the domain name pressing the SPACEBAR will select or deselect the field highlighted.
You may also be able to use the option of simplified field Notation if the names of the fields conform to the naming standard.
-
trying to downlad but 12 items cannot select the language
I try to download 12 items but cannot select language.on page where you choose the version, it asks of prefference language but the language button does not work. I'm trying to move items to a new computer. (windows)
Download Photoshop Elements products | 10, 11, 12, 13
There are a group of languages in the upper left block and the 2 files in the right column to download for Windows in these languages, and a group of languages in the lower left for Mac and a single file to download in the Central column for all these languages.
Guinot
-
Cannot select the text to change
I inherited a document and I can't change the text on a page. I tried the different layers but cannot select same text.
I use CC 2014.0
Brian
Is the text on the master?
It is on a locked layer?
The text block is locked?
Something is above the text frame?
Maybe you are looking for
-
It seems that Apple has removed sides of Star of the new redesigned music application. This has made the majority of my broken playlists, as they do things like 'Rock music 3 stars and up', '5 2016 music stars' etc. Or am I missing something? Is ther
-
I have a Mac OSX 10.8.5 and use iPhoto 9.4.3. iPhoto now opens and a box asking me to report to Apple which I did many times. Then I tried to re - loading iPhoto from scratch, but a box tells me that I must do so via Mac App Store - and simply, I c
-
I have a month old Satellite L40-17s. Now when turned on I had a completely black screen with just the white arrow on the screen pointer. NOTHING else. When I turn off, the power LED flashes orange - which seems to indicate that the computer has been
-
Analog input voltage assistant DAQ
Does anyone know why theres error when you use two assistant DAQ (in a while loop at the same time) for reading of the analog input voltage? There is not a problem if you use a wizard to data acquisition for analog input voltage reading simple.
-
BlackBerry Smartphones take pictures during a call
Is this possible? Sounds stupid, but I saw on a TV show and I was wondering if it was possible. Had a look and can't see the option, but would be interested in a feature like this.