Cannot select the device scanner, AIO F380, MacBook Pro

Similar Questions

• Re-install C3180, cannot select the device in the Setup Wizard, the scanner is not found

  Try to reinstall HP Photosmart C3180 after that is a problem.  Uninstall done smoothly.  Re-install message said "successful."  In the HP Installation Wizard, click 'next' on the introduction page and move to select the page of the device.  There is nothing to select.  If I cancel, I can make copies and print a document.  However, when I select HP Scan Pro window opens successfully but I get an error message that says "sorry, scanner could not be initialized. (Scanner not found.)  My operating system is OS 10.6.8

  Hello

  The HP Scan Pro is not scheduled for OX X 10.6, so the installed software is not one that is suitable for your OS.

  Follow these steps to remove the printer driver and software:

• Cannot install the desktop creative cloud on Macbook Pro or PC application

  I tried to install the desktop application creative cloud on my Macbook Pro at home and my PC at work. Neither work and it's very frustrating!

  On Macbook Pro (running OSX 10.7.5) but a tin can by appearing, finder dialog asking me my user name and password. I enter my admin details and just search dialog box keeps reappearing, with no installation happening. I also tried to enter my Apple ID (as advised by the media) and that does not work either.

  On my work PC (running Windows 7 Enterprise) when I try to install I am getting code 43 error - impossible to copy a critical file. I have to login to admin from my work computer information and that you have installed several programs without any problems.

  Any ideas?

  I do not think that Mac 10.7.5 is supported

  Minimum requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

  Error 43 https://forums.adobe.com/thread/2070909

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• There the device which recharge a MacBook Air, as does the mophie for iPhone?

  There the device which recharge a MacBook Air, as does the mophie for iPhone?

  I haven't used any but they do exist. And here are two:

  http://www.Amazon.com/ChugPlug-external-battery-portable-adapters/DP/B00IIZOYFG

  http://www.hypershop.com/products/hyperjuice-external-battery-pack-for-MacBook

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• Cannot select the Dictionary view user USER_TAB_COMMENT?

  Hello.
  
  I have this weird problem in 11.2.0.3
  
  I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
  If I try to describe it, I get ORA-00942 and ORA-04043 messages.
  
  Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:

  SQL> conn RODOLFO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "RODOLFO"
  SQL> comment on table DOCUMENTILLOS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments;
  select table_name, comments from user_tab_comments
                                   *
  ERROR en línea 1:
  ORA-00942: la tabla o vista no existe
  
  SQL> desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> desc all_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> conn / as sysdba
  Conectado.
  SQL> show user
  USER es "SYS"
  SQL> select owner, table_name, comments from dba_tab_comments
    2  where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS'
    3  ;
  
  OWNER                          TABLE_NAME
  ------------------------------ ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  RODOLFO                       DOCUMENTILLOS
  This is a comment
  
  
  SQL>

  Other users, I don't have this problem

  SQL> conn MANOLO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "MANOLO"
  SQL> comment on table DOCS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS';
  
  TABLE_NAME
  ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  DOCS
  This is a comment

  Clues why this is happening?
  
  Kind regards.

  elvegaa_esp wrote:
  What do you think?

  OK, the question is in the place where he is not pointing?

  Edit:
  Oh, it looks that it points to dba_tab_comments. Since your original post:

  desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  

  Who do not have the right of Rodolfo.

  Thus, final to get rid of him.

  And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.

  Concerning
  Peter

  Published by: Peter on March 11, 2013 08:49

• Want 5660: Cannot connect HP Envy 5660 to my macbook pro version 10.9.5

  I bought a HP Envy 5660 today.  I tried for several hours, but cannot install the printer on my Macbook pro, version 10.9.5.  They assured me that there would be no problem, I missed something?  You have to install via the USB cable (it was not included)?  I get to select the device you want to install, but it is not locate the device.  Any tips?   It worked very well for my iPhone.

  Thanks in advance!

  Well, you can still use this router, but I suggest you contact the manufacturer of the router to disable the frequency of 5.0. If you have the know-how, you can go to the routers on the computer's built-in Web page and make you that adjustment.

  There is also a setting on the printer that could conflict with the wireless feature. Before tinkering with the router, let's go to the front panel of the printer, in settings/settings, then select Network Configuration. In the network configuration menu, please go to Advanced Details then IPv6. Please disable IPv6.

  I saw the IPV6 interferes with the Hello Protocol several times, often time turning off this feature will solve the problem and allow the Mac to see the printer on the network. Once IPV6 is disabled try to add the printer again.

  If the problem persists, the next step is change the router so that it only broadcasts of 2.4 GHz.

  Please let me know if this helps you solve the problem. Thanks again.

• Error message 'Install' everything is damaged by doing a clean reinstall of the MasterCollection_CS5_LS4.dmg on my MacBook Pro.

  Hello
  I get the error message "Install" the file is damaged. MacBook Pro (20102), the system is OSX10.11.2 El Capitan.
  I own the MasterCollection_CS5_LS4.dmg since 2010.
  Occurs when I try to install from my backup disk (I kept the original download as a copy on the external hard drive).
  I have now also redownloaded the .dmg together once again and got the same error message.

  Second:
  By logging into my account, it only shows me the order number and the price I paid, but does not give me the option to download from there.

  Anyone has an idea on how to get this race?
  Appreciate your comments.

  Hi John,.

  a friend gave me the solution, the old CS works perfectly on the new SSD and the OSX El Capitan
  Go to privacy and security in the system preferences.
  On the general tab, it should say allow applications downloaded on. Select anywhere.
  Then try to reinstall.
  It worked for me and I put the security preferences back to the original configuration.

  Made me a happy camper :))

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• How can I find the IP address of my MacBook pro

  How can I find the IP address of my MacBook pro

  http://www.WikiHow.com/find-your-IP-address-on-a-Mac

• Why the update did slow my MacBook pro down so

  Why the update did slow my MacBook pro down so much? What could be in the last update of El Capitan to slow my Mid 2010 GHz Intel Core 2 Duo Macbook Pro 2.66 down so much?   He has never run it slow before! Everything takes more time in all areas. Could I have made a mistake during the download and installation?  If so is it possible to force a re - install the latest update?

  I don't know if I can restore back after an update of this size. Everyone has similar problems or have thoughts on what could be wrong? I know it's far from being a State of the art Macbook Pro. But it was working fine before the update.

  Any thoughts would be really appreciated. I can't afford to buy anything newer right now.

  Thank you

  Ron Genovesi

  HMBGENO

  Things you can try to solve this problem:

  1 https://support.apple.com/kb/PH21875?viewlocale=en_US & local = en_US

  Start in safe mode and then restart.

  2. How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM.

  If this does not help, download Etrecheck, a report and view the results here.

  http://etrecheck.com

• How can I get the serial number if my MacBook Pro is lost or stolen?

  How can I get the serial number if my MacBook Pro is lost or stolen?

  Try the suggestions here > find the serial number of your Apple hardware product

• Cannot find the app on my HP Officejet Pro 8500 a eFax

  Cannot find the app on my HP Deskjet Pro 8500 a eFax. For the eFax Webside only the eFax more and Pro services are available.

  The eFax free service not exisst more?

  See you soon

  Michael

  Hi Michael,

  The eFax service is not available for any model of printer.

  The only models currently supports the eFax App are HP Photosmart C510, HP ENVY 110 and HP Photosmart 7510.

  In addition, the eFax App was never offered for an all-in-one containing a physical analog fax card.