Cannot send fax LaserJet Pro M1212nf

Similar Questions

• HP LaserJet Pro M1212nf MFP

  HP LaserJet Pro M1212nf multifunction printer range running on Windows 8.  I try to print a page from an invoice in PDF format > the printer will not print parts of the Bill, as it does not print some fonts on the page.  It's all text, no graphics.  The Page prints fine on my HP 3600

  I thought about it this morning.  It has something to do with the Windows ap player.  I changed the default Adobe Reader program and it printed fine.

• HP 1536dnf: M1536dnf cannot send faxes from charger only from glass.

  I can't send faxes to high feeder if I place the fax on the glass. Message I get is always "the fax storage" and the makers of fax to be sent. Updated firmware to date with no solutioin.

  Welcome to the HP community @perlfather,

  I read your message on the message "memory fax" you're noting on your LaserJet M1536dnf and no faxing. I suggest you power reset of the printer and to make sure that the printer has a connection directly to a wall jack, avoiding power bars and surge limiters.

  • Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

   

  Let me know what happens please. I will do my best to help if necessary!

  Send me a 'thanks' by clicking on the thumbs upward! If these steps help to solve the problem, please press "Accept as Solution" too!

  Best wishes!

• LaserJet Pro M402n: Cannot print on LaserJet Pro M402n on port TCP/IP for Windows 10

  I'll put up a new workstation Windows 10. It is brand new with all updates applied. The printer gives me fits. I tried to install as myself (with administrator privileges), 'run as administrator' and logged in as a local administrator and I got the same results each time. I used 'install' and 'non-installateur' version of the most recent drivers.

  The printer is a HP LaserJet Pro M402n. I'm installing a Standard TCP/IP Port. I can ping the printer. I can get on the printers web interface. Likewise, the installation program detects the printer and gives no error. But when the installation is complete, and I try to print a test page, nothing happens.

  The same printer is configured the same on my old Windows 7 workstation which is still on my desktop and connected by the same switch and on the same subnet as the new work center. It prints very well.

  Any ideas to get this to work?

  Got, it works. It had to be that something gimped upward in the initial installation of Windows. I've reconfigured on the PC and was able to get the printer to work first time.

• HP Laserjet colorMFP M475dn: cannot send faxes from my mac after the upgrade to yosemite

  I used to be able to send a fax from my Macbook Pro using an excerpt and then print the PDF file to the fax on my Laserjet M475dn colorMFP function.

  After installation of OS X Yosemite:

  • a dialog box says that "some of the software of the printer is missing."
  • When I clicked on the button install, then said "you must install the software to use this printer...." If the software is not available in software update, contact the manufacturer of your printer"
  • Then I downloaded the .dmg for laserjet and officejet files (I also have a photosmart that I use for scanning)
  • I deleted the printers and tried to re - add
  • When I add printers laserjet, fax does not show up on top of the list of printers.
  • How can I get the fax driver to install on OS X Yosemite?

  OK, mission accomplished! My ability to fax works on Mac OS X Yosemite!

  So to sum up, here's what I did, although not necessarily in this order:

  1 reset the printing system, which erased all of the devices in the list Printers & Scanners

  2 install the software utility package HP = HP-LaserJet-SW-OSX - Mavericks_v12.34.34.dmg

  3 install the package for the HP printer software update 3.0

  4 restarted my mac

  5 entered in Printers & Scanners and when the dialog box pops up, added the Fax with the driver for Fax selected in the drop-down list to use as directed by the dialog box illustrated by TeK_AcE

  6 tested the fax print in overview and selecting 'Fax PDF' in the menu drop-down PDF. I sent a fax to the fax number of the HP test at 1-888-hpfaxme or 1-888-473-2963

  7. Add the printer again, the driver Laserjet and not Airprint

  Hope this helps someone else.

• HP Officejet Pro 8610: hp Officejet Pro 8610 cannot send faxes "Fax line State Fail"

  Dear support,

  I would like to send and receive faxes from hp Office jet Pro 8610:

  -the phone system is on PABX

  -J' have installation eja prefix dial number is "9".

  -Fax, run the Test, he failed "Test status of line Fax".

  -J' removed the prefix number, still aren't.

  -Here are the pictures:

  

  -Here is the arpeggio

  

  I thnk there is no problem with the cord, it has passed the test.

  -When I dialed the number of fax to the recipient, the message 'no response '.

  -J' plugged the 2 - Ext on the phone port, it can be used to call (using the 9 prefix) and receive a call.

  Help, please

  It was caused by the digital telephone network. Fax it extreme requires analog network.

  solved by me.

  Thank you =)

• Cannot send faxes with activated delivery receipts

  I use Windows Fax Scan & on W7 Pro v6.1.  When I try to send a fax with the non-permit, I receive an error message that the fax will not go because my fax server doesn't support non-delivery.  I do not use a fax server.  I have a fax modem external attached to my home phone line.  What is my desktop computer itself that may not support non-delivery?  I think the question would be more software than hardware related.

  I thought about sharing this

  http://TechNet.Microsoft.com/en-us/library/cc732281.aspx

  Apparently, it is supposed to work (only) with the fax on Win 2K 8 Server

• Cannot send faxes with HP officejet 8600

  Original title - 8600 hp officejet fax

  I can't get my HP officejet 8600 to send a fax... Help

  [Moved from comments]

  Hi Russell,

  You can view this issue in the Forums of HP Support: http://h30434.www3.hp.com/

  We can also refer to this article and check if that helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4322914&prodTypeId=18972&supportTaskId=42488

  Thank you.

• Cannot send faxes from Fax Console

  I have a problem with my fax services.  I went and updated windows for my windows xp.  I downloaded the fax software, but it does not allow me to install it.  Then, I went to the control panel and clicked on Add/Remove programs and then I checked the fax services on windows components area and he told me that I have a service pack 3 and insert the cd. My computer came with any cd or boot disk.  There is not that it is installed on my computer that I bought at Best Buy.  They said that computers are like that. I find that hard to believe, at this time, it's true. However I need help to get Fax installed.  I have a modem with the cable operator and told me that I could run fax over there.  I am naïve when it comes to all these stuff Setup. Please help because I need to fax to work.

  In order to send and receive faxes, you need a conventional fax modem
  with a direct phone line attached.  You can use the broadband unless you
  use a web-based service like eFax fax:
  http://www2.eFax.com/eFax/TWA/page/homepage

  Or consider buying a regular fax and connect it to your phone
  line.

  Carey Frisch

• Cannot send faxes. Message: "the message cannot be sent. Media is write protected"OS Win7 64

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  This will help you... go register around...

  http://www.winvistatips.com/fax-error-message-could-not-sent-media-write-protected-t158670.html
  then restart your pc and go ahead with the next steps

  Step 1: Restart the fax service
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, right-click on the fax, and then click Stop.
  c. double-click Fax, change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.
  e. check if the problem persists.

   
  If the problem persists, disable and enable the Windows Fax and Scan
  Step 2: Disable Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. uncheck "Windows Fax and Scan"
  d. click ok and restart the computer for the changes to take effect.
   
  Step 3: Activate Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. place a checkmark on "Windows Fax and Scan."
  d. click ok and restart the computer for the changes to take effect.
   

• HP Envy7640: cannot send fax

  Fax dials out my $ before # recipient, therfore busy signal.

  Did exactly what you said and everything is fine! Thank you

• 7515e HP: 7510e hp cannot send fax

  Printer says it is not connected to the network when I try to FAX.  Wireless network test shows that it is connected.  Eprinting wireless works.  I followed HP troubleshooting guide and everything seems normal and connected.  Need help.

  Hello fraz1774,

  Welcome to the Forums of HP Support!

  Regarding your request to eFax, I suggest you take a look at the original post here: eFax users - please read

  I believe that some colleagues of mine are keeping an eye on this Thread, it is the best place to post.

  Kind regards

• LaserJet Pro M1212nf does support WPS?

  The specifications of the printer said it built in ethernet and network ready, but there is no specific instructions or information about this printer Advisor if she supports the WPS installation & configuration of the network. This is a second laptop, and a printer that I use in a different field than my desktop. The laptop IS connected to my network, but can't find this printer. I can around duty set & print using the USB cable on the model M1212nf? All the literature is for the 'family' of printers and not this printer.

  I checked the specifications of the printer... it does not support WPS.

  Note:
  Although I work for HP Imaging & Printing Group, I speak for myself and not for HP.

• LaserJet Pro M1212nf MFP: There is no installed TWAIN compatible device.

  Since the upgrade to Windows 10, my scanning function produces the error message in the subject line.  The printer was working after the upgrade I don't analyze that often, so I did not immediately notice.

  The system now lists a "other device" called HP SCAN that has no attached driver.  The HP print and scan doctor identifies the HP SCANNING as a unit without a driver, but it will not fix.

  This PC is my home office autonomous with the printer connected as a USB device.  I didn't lose the functionality of the printer, so I downloaded the latest driver Windows 10 available for this printer and re-installed, using the option "fix."  Without success.

  Should I run the installation executable and choose to install a new printer?  Or someone has a better option?

  Thanks in advance.

  Greetings @tjd48,

  Welcome to the Forums of HP Support! By your post, I see that you are missing the drivers scanner. Please provide detailed information of all that. I'd love to help you.

  I suggest to delete the preinstalled Windows driver and download and install the latest drivers: LJM1130_M1210_MFP_Full_Solution.exe

  Immediately after connecting the USB cable, follow the steps described in this paper: A Fatal Error displays during Installation of the software. Do not take into account the title. It's just to make sure that the correct drivers settle for the printer and is not hanging up.

  Test the printer.

  If you enjoy using, click on 'Accept as Solution' and 'Thumbs Up' buttons. Please hold me. Kind regards

• memory error laserjet pro m1212 - among other problems

  I'll just put up a LaserJet Pro M1212nf.

  WIN7 OS

  error message below in the text

  No change, install new

  I'm angry against HP before even getting the thing completely uncompressed.

  WHY HP is too cheap to provide a USB cable?

  OK, have to run out to the store.

  But, in addition, I power up the printer and I am getting a memory error. It says "memory error 10.1000 supply."

  HP made a final inspection, or am I their unpaid final Inspector?

  There is a paper tray, presumable to capture the output of the printer. The only problem - he obviously does not anywhere, ridiculous installation manual says nothing about this, and after downloading the user manual, which says nothing no more.

  Nowhere in the manuals gives error codes.

  Just to add insult to injury, there is no registration card. HP guarantees this thing? With these many problems, why t - you buy HP?

  Someone at HP read this, or am I just whistling in the wind? Yes, I'm upset. I've never bought a printer before who has not just plug the supplied cables and WORK.  {Content deleted: legal discussion}

  Hi pilotgeorge,

  I can understand your frustration with this issue. After reviewing photos it seems that you have the correct output tray for this printer. Below, I have included a link to a video that will guide you through the installation of the paper output tray. If you feel that this is not the bin OK Please feel free to contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  MFP HP LaserJet Pro M1212nf Unboxing - PT. II:

  http://www.YouTube.com/watch?feature=player_detailpage&v=hK7tMAJfMJU