7515e HP: 7510e hp cannot send fax

Similar Questions

• HP 1536dnf: M1536dnf cannot send faxes from charger only from glass.

  I can't send faxes to high feeder if I place the fax on the glass. Message I get is always "the fax storage" and the makers of fax to be sent. Updated firmware to date with no solutioin.

  Welcome to the HP community @perlfather,

  I read your message on the message "memory fax" you're noting on your LaserJet M1536dnf and no faxing. I suggest you power reset of the printer and to make sure that the printer has a connection directly to a wall jack, avoiding power bars and surge limiters.

  • Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

   

  Let me know what happens please. I will do my best to help if necessary!

  Send me a 'thanks' by clicking on the thumbs upward! If these steps help to solve the problem, please press "Accept as Solution" too!

  Best wishes!

• Cannot send faxes with HP officejet 8600

  Original title - 8600 hp officejet fax

  I can't get my HP officejet 8600 to send a fax... Help

  [Moved from comments]

  Hi Russell,

  You can view this issue in the Forums of HP Support: http://h30434.www3.hp.com/

  We can also refer to this article and check if that helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4322914&prodTypeId=18972&supportTaskId=42488

  Thank you.

• Cannot send faxes from Fax Console

  I have a problem with my fax services.  I went and updated windows for my windows xp.  I downloaded the fax software, but it does not allow me to install it.  Then, I went to the control panel and clicked on Add/Remove programs and then I checked the fax services on windows components area and he told me that I have a service pack 3 and insert the cd. My computer came with any cd or boot disk.  There is not that it is installed on my computer that I bought at Best Buy.  They said that computers are like that. I find that hard to believe, at this time, it's true. However I need help to get Fax installed.  I have a modem with the cable operator and told me that I could run fax over there.  I am naïve when it comes to all these stuff Setup. Please help because I need to fax to work.

  In order to send and receive faxes, you need a conventional fax modem
  with a direct phone line attached.  You can use the broadband unless you
  use a web-based service like eFax fax:
  http://www2.eFax.com/eFax/TWA/page/homepage

  Or consider buying a regular fax and connect it to your phone
  line.

  Carey Frisch

• Cannot send fax LaserJet Pro M1212nf

  Help me please correct.

  LaserJet Pro M1212nf. analog phone connected via the "phone" on the back panel port.

  In the manual to read:

  ===================================================

  Send a fax in composition from a telephone connected to the fax line
  Occasionally, you can dial a fax number, a phone that is connected to the same line as the product. For example, if you send a fax to a person that the device is in the manual receive mode, you can precede the fax with a voice call to inform this person that the fax is coming.
  NOTE:
  The phone must be connected to the port 'phone' product.

  Load the document into the document feeder.

  Pick up the handset of a telephone that is connected to the same line as the product. Dial the fax number using the phone keypad.

  When the responses from the recipients, give instruction to start the fax machine.

  When you hear fax tones, press the Fax theSend, wait until the connection is displayed on the screen of the control panel and then hang up the phone.

  ====================================================

  But, when I hear fax tones and press the Fax button, no message connection on the screen, but I see Incoming call, and try to fax receive faxes, do not send.  Faxing via the digital button on panet before M1212 isn't a problem, everything ok.

  What's wrong?

  so I understand my mistake, document MUST be in the document feeder, no scanning no glass.

  Thank for the help ^)

• HP Officejet Pro 8610: hp Officejet Pro 8610 cannot send faxes "Fax line State Fail"

  Dear support,

  I would like to send and receive faxes from hp Office jet Pro 8610:

  -the phone system is on PABX

  -J' have installation eja prefix dial number is "9".

  -Fax, run the Test, he failed "Test status of line Fax".

  -J' removed the prefix number, still aren't.

  -Here are the pictures:

  

  -Here is the arpeggio

  

  I thnk there is no problem with the cord, it has passed the test.

  -When I dialed the number of fax to the recipient, the message 'no response '.

  -J' plugged the 2 - Ext on the phone port, it can be used to call (using the 9 prefix) and receive a call.

  Help, please

  It was caused by the digital telephone network. Fax it extreme requires analog network.

  solved by me.

  Thank you =)

• HP Laserjet colorMFP M475dn: cannot send faxes from my mac after the upgrade to yosemite

  I used to be able to send a fax from my Macbook Pro using an excerpt and then print the PDF file to the fax on my Laserjet M475dn colorMFP function.

  After installation of OS X Yosemite:

  • a dialog box says that "some of the software of the printer is missing."
  • When I clicked on the button install, then said "you must install the software to use this printer...." If the software is not available in software update, contact the manufacturer of your printer"
  • Then I downloaded the .dmg for laserjet and officejet files (I also have a photosmart that I use for scanning)
  • I deleted the printers and tried to re - add
  • When I add printers laserjet, fax does not show up on top of the list of printers.
  • How can I get the fax driver to install on OS X Yosemite?

  OK, mission accomplished! My ability to fax works on Mac OS X Yosemite!

  So to sum up, here's what I did, although not necessarily in this order:

  1 reset the printing system, which erased all of the devices in the list Printers & Scanners

  2 install the software utility package HP = HP-LaserJet-SW-OSX - Mavericks_v12.34.34.dmg

  3 install the package for the HP printer software update 3.0

  4 restarted my mac

  5 entered in Printers & Scanners and when the dialog box pops up, added the Fax with the driver for Fax selected in the drop-down list to use as directed by the dialog box illustrated by TeK_AcE

  6 tested the fax print in overview and selecting 'Fax PDF' in the menu drop-down PDF. I sent a fax to the fax number of the HP test at 1-888-hpfaxme or 1-888-473-2963

  7. Add the printer again, the driver Laserjet and not Airprint

  Hope this helps someone else.

• Cannot send faxes with activated delivery receipts

  I use Windows Fax Scan & on W7 Pro v6.1.  When I try to send a fax with the non-permit, I receive an error message that the fax will not go because my fax server doesn't support non-delivery.  I do not use a fax server.  I have a fax modem external attached to my home phone line.  What is my desktop computer itself that may not support non-delivery?  I think the question would be more software than hardware related.

  I thought about sharing this

  http://TechNet.Microsoft.com/en-us/library/cc732281.aspx

  Apparently, it is supposed to work (only) with the fax on Win 2K 8 Server

• Cannot send faxes. Message: "the message cannot be sent. Media is write protected"OS Win7 64

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  This will help you... go register around...

  http://www.winvistatips.com/fax-error-message-could-not-sent-media-write-protected-t158670.html
  then restart your pc and go ahead with the next steps

  Step 1: Restart the fax service
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, right-click on the fax, and then click Stop.
  c. double-click Fax, change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.
  e. check if the problem persists.

   
  If the problem persists, disable and enable the Windows Fax and Scan
  Step 2: Disable Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. uncheck "Windows Fax and Scan"
  d. click ok and restart the computer for the changes to take effect.
   
  Step 3: Activate Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. place a checkmark on "Windows Fax and Scan."
  d. click ok and restart the computer for the changes to take effect.
   

• HP Envy7640: cannot send fax

  Fax dials out my $ before # recipient, therfore busy signal.

  Did exactly what you said and everything is fine! Thank you

• HP J3608 Fax problem: recipient cannot hear me when sending faxes using the HP Solution Center

  Hi all

  I have problems with our HP Officejet J3608. I have explored its functionality to send the fax using Solution Center HP AIO. So I opened a word file > press print to the fax > then a dialog box appears asking you for the recipient and all other info > I enter the number of the recipient fax and press send fax > then the fax includes the number and rings > the recipient responds by saying hello, "who is this?" > I said hi, "can I have a fax tone?" > the recipient says ' Hello? Hello?? "then drops the phone.

  Then I found that the recipient cannot hear us on our part, I tested it with other recipients. The recipient is on strong talk and when I lift the phone in the device, it is always to steal it. What is the problem here?

  Take note that this is not happening when we directly dial the telephone number of the device and feeding it with a printed version.

  Thank you very much and I hope someone answer my question. This will really mean a lot.

  Depending on the machine you send your fax to depends on how he responds. Most fax machines have no phone attachments, and the 'auto response' is a parameter that allows the printer to recognize the incoming faxes and receive them automatically. What you describe is the manual answer option, in which the recipient recognized the incoming fax and must manually answer.

  In this scenario, it will depend on the machine you are sending to and whether it can receive in this same way.

  Let me know!

• Can send but cannot receive faxes on HP Laserjet on Mac 10.9 Mavericks with answering machine TAM

  I have an iMac running OS 10.9 (Mavericks) and a machine to print/scan/fax all-in-one HP Laserjet Professional M1212nf MFP connected by USB.  I have a phone with answering machine connected system.

  I can send faxes of the HP and the Mac (using the pdf fax).  What I can't do, is to receive faxes on the HP (I know that the Mac cannot receive faxes with this machine).  I tried all the combinations of parameters without result even unplug the phone/answering machine without result.

  Any ideas what I need the settings?

  Hi ChuckStewart,

  It is definitely a head scratcher! I found some additional information from the following link, you use a product of Fax HP with a telephone answering machine (TAM).

  I found this interesting presentation text, when recording the outgoing message on your TAM, share of voice must be at least 10 seconds of time, but not more than 20 seconds . Save 5-7 seconds of silence at the end of the vocal part of your outgoing message (message coming out would be your voice message length plus the extra 5 to 7 seconds of recorded silence ).

   

  I wonder if you might find something useful in the document.
  

  Please let me know. Thank you.

• HP Send Fax cannot connect

  I have a 276 MFP connected via a network and using Windows 7 64 bit.

  I can print, remote scan, access to information through the device HP Toolbox and can test the printer. I do not use a firewall on my computer. When I try to use HP Send Fax it tells me that I can't communicate with the printer.

  Someone at - it solve this problem?

  I can send by fax machine. I can remote scan, I can save a scan to a network folder. I've uninstalled and reinstalled the drivers. Nothing works.

  I emailed HP customer care and they have quickly closed the case without doing anything just to preserve their statistics. So there is no need to contact them directly. Hoping someone has the solution here.

  Discovered that IE11 was the problem. Once we removed it that has solved the problem with the fax.

• Cannot send a fax from my iMac

  Hello

  I am trying to send faxes from my iMac via Epson L565. I have

  I can't do and I hope that you will be able to guide me how to solve this problem.

  It is described here:

  https://www.dropbox.com/s/w6853gesgx9idh9/L565%20No%20fax%20from%20My%20Mac.PDF? DL = 0

  Thanks in advance

  How are you trying to send a FAX? What happens when you try? You can send a FAX directly from the FAX machine? What is the machine FAX connected to a phone line?

• 7520 can send faxes but cannot receive faxes

  We just installed the 7520 and everything seems to work fine except the reception of faxes.

  We can send faxes fine, but the strange thing is when I try to call the fax number for a phone, it acts like its dead, you never hear it ring or whatever it is, then it just disconnects. If I pass the phone cord to the Ext on the back of the unit and then dial the number I hear it ring the phone and the device 7520.  The screen lights up because there is an incoming call and shows that auto answer is on, but when he answers we never hear the normal fax type tones and it never connects.

  The phone is provided by Time Warner Cable and it plugs into the cable modem. We called Time Warner and they told us that the line for the fax is an analog line, but I have no idea how to verify or prove that.

  I can't understand why he's going to send faxes without problem but looks like it is a dead line trying to receive a fax.

  Any thoughts?

  I sent the steps to your Forums HP box.

  If this does not help, the next step would be to contact HP technical support.  I would like to know if the reset helps.