Cannot set any wallpaper as my wallpaper

Similar Questions

• Cannot set the default printer. error 0 X 00000709

  Hi all

  Cannot set any printer as the default printer. An error message appears, error 0 X 00000709. I have tried to use a guide on the Forums, on the Windows system registry, still does not work. And I couldn't print anything using the PDF, but Words of Microsoft Excel and Notepad are able to print. In addition "format the hard drive, create a user and Fix a user profile is corrupted", is there a solution? Help will be very appreciated.

  Thank you

  Aaron Kwan

  Hi Aaron,

  I appreciate your efforts to solve the problem.

  What is the brand and model of the printer?

  This problem can occur if the wires that are not connected correctly, due to corruption drivers, drivers incompatible, if print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2:
  If the problem persists, I suggest you temporarily disable the security software of the computer and check.

  Disable the antivirus software.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Note: try all the steps except the resolution of problems.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Check out the link for more information:

  Resolve PDF printing problems. Acrobat, Reader
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Z30 blackBerry cannot set the live wallpaper for BB Z30

  Downloaded live wallpaper 1 market mobile, but cannot set my home sceen for BB Z30. Help, please.

  Live wallpaper is not supported on the BlackBerry that Android has no knowledge of the BB10 homescreen.

• Cannot set personal images as desktop wallpaper

  I am trying to turn my desktop a personal picture and the screen goes black. It will change the display, but not photos in my file.
  I want to change my computer's desktop to a picture in my folder, but it won't.

  Hello

  What is the file format of the images that you try to set as wallpaper?

  Try these steps and check if that helps:

  Step 1:

  a. navigate to the following location:
  %UserProfile%\AppData\Roaming\Microsoft\Windows\Themes
  b. check if you see INI files at this location.
  c. If Yes, then open the files in Notepad.
  d. remove the contents of the file and save it.
  e. restart the computer and check to see if that fixes the problem.

  Step 2:

  I suggest to create a new user account and check if it helps.

  Follow these steps to create a new user account:
  a. open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  b. click on manage another account.   If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on create a new account.
  d. type the name you want to assign to the user account, click an account type (Administrator), and then click on create an account.

  Refer to this link for help:

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I set a wallpaper if the explorer.exe shell is intentionally never started

  The scenario:

  I want to run Windows 7 in Kiosk mode using only the touch input keyboard and mouse.

  To do this, I replace "explorer.exe" in HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell with the path to my application. It does everything that I need because there is no keyboard and mouse attached.

  I also put a wallpaper that tells the user to contact our support.

  So if my application can not start or fails for any reason, the user cannot manipulate the system, but he receives a useful message.

  On Windows XP, everything works fine - my application starts full screen so paper mask painted. If it crashes, then the background reappears.

  On Windows 7, however, no background appears. The screen remains black even if a valid path is set in the registry. It seems that on Windows 7, explorer.exe is responsible for setting the wallpaper. Since he's never started, no wallpaper is displayed.

  How can I manually set a wallpaper if explorer.exe is never started?

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please reach out to the community of professional support in the TechNet forums below:

  TechNet forums

• I can't set a picture as my wallpaper. I right click on an image, select "Set as wallpaper" and nothing happens.

  I just got a new mini Inspiron.  I can't set a picture as wallpaper... I am right-clicking on an image, select "Set as wallpaper", and nothing happens.  What I am doing wrong?

  Hello Barnum255,

  Thank you for visiting the Microsoft answers community.

  I have found that Dell mini do not have an option for anything other that Windows 7 Starter install manufacturer. This option is not available in Windows 7 Starter.

  Click here for more information about customizing Windows 7.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I cannot set up my email account and get prospects to accept it. I am tring to use a gmail account, I am new to this and don't know what iam do any help would be great

  I cannot set up my email account and get prospects to accept it. I am tring to use a gmail account, I am new to this and don't know what iam do any help would be great

  Hello

  1. you try to add the Gmail account in Outlook?

  2. are you referring to Outlook.com or Microsoft Office Outlook?

  If you are referring to Outlook.com, then I suggest you according to the application in the Windows Live forum to improve assistance:

  Reference:

  http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=QnA

  If you are referring to Office Outlook, and then send the query Office Forum.

  Reference:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=QnA

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

  Original title: cannot set a power scheme in Power Options

  Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

  How can I fix it?

  Hi BernieHopkins,

  1 have you properly previously defined the power scheme?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

  Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

  Hope the helps of information.
  Please post back and we do know.

• WINDOWS CANNOT FIND ANY ADDITIONAL NETWORK (DIAL-UP AND VPN) OTHER THAN THE WIRELESS NETWORK

  ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to the internet via USB with the computer "I get a message that windows cannot find any additional network." Its really disturbing that I can do to fix this. Can someone help me please.

  Even if a USB device, it does not create a new network connection for you.  I fear also that you use a regular USB cable - those connections often require a crossover cable (but more on that later and I guess it should work it is how it is advertised).  Go to start / Control Panel / Network and sharing center / set up a connection or network / and choose the first option (you can also check the main page to see if the connection is listed but I doubt it).  Choose to set up a new connection and follow the instructions - ensuring that you enter the correct settings when it is required.  You should perhaps install device drivers, firmware and or software for the device to work properly - read the installation mode (and call technical assistance from Nokia to help you put in place - they know more about what we do and should be happy to guide you through the process and even to set the settings on your computer until you log - that's what I would do in your before circumstane even of) ask for help here).

  To start / Control Panel / Device Manager and check all the new drivers (double clck on them) to confirm that they say that they do not work properly.  Go to start / Control Panel / Add Haedware and have the system check new hardware devices - if it finds, install them (it is perhaps what is missing in this process).

  I hope this helps.  If nothiing suggested I bring, don't hesitate not to contact Nokia for assistance - I'm sure they'll have you place and operate at any time.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot set a default website in Google Chrome

  Hello

  Cannot set the default Web site in Google Chrome.  IE has been simply to go to the top of the page of google/right click / check the menu/internet options / and choose URL [google.com] to start by default.

  It is impossible for me to understand or to find the way to do the same for Google Chrome.  I just want to open google.com when I click on the Google Chrome icon.  Please notify.

  Thank you

  Joe

  Hello

  Thanks for posting your query in Microsoft Community.

  However, since the issue is specific to Google Chrome, I will ask post you your query in Google Chrome support for the best support possible.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Windows cannot discover any computer or device

  Hello

  I am to evaluate Windows Server 2012.

  I've set up a small network size, with a server (Windows server 2012), a switch and a workstation (Windows 7). I set up a domain.

  In my computer (Windows 7), when I try in "Network and sharing Center" feature run the "see the whole map" I get: "Windows cannot discover any computer or device.

  Reboot in 'safe mode with network', and repeting the operation fails the same, but with a different message: "Windows cannot start mapping on the adapter. Please make sure that the adapter is connected and active.

  I checked the card through "Control Panel\All Control Panel Items\Troubleshooting\Network and Internet". Result: "Troubleshooting couldn't identify the problem.

  The State of the map is:

  IPv4 connectivity: Internet
  IPv6 connectivity: No network access
  Media state: enabled

  The adapter is a "Atheros AR8151 PCI - E Gigabit Ethernet Controller (NDIS 6.20)", and the motherboard is recent (a Gigabyte GA-Z77X-D3H).

  In addition, I ping the Windows Server 2012 of the Windows 7 workstation and vice versa. Remote Desktop connection works too well.

  "Network control and Internet\Network and sharing sharing settings Center\Advanced" the Windows 7 workstation, I duly turned on "network discovery.

  Also, I have disabled the windows firewall for both machines, without result.

  What can I try something else? What could be?

  Thank you

  Varus

  Hi VarusGermanicus,

  For assistance on this issue, you can post your question in the Technet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• Cannot set a default for documents pdf Acrobat XI.  Wants to stay with Microsoft Edge.  16 Windows.

  Cannot set a default for documents pdf Acrobat XI?  Wants to stay with Microsoft Edge.  16 Windows.

  Hi tenleyvan,

  Could you please if you want to XI default Acrobat open pdf documents?

  Or do you want to open pdf in Microsoft Edge?

  Do XI Acrobat default to open the PDF, right-click on any pdf file > click Open with > choose another application > select Adobe Acrobat in the list > check "Always use this app to open .pdf files" > OK

  It goes the same for Microsoft Edge, select Microsoft Edge in the list instead of Adobe Acrobat.

  Let us know if you face any problem.

  Thank you! Shivam