Re: Tecra S11 - sometimes WLAN simply disconnect

Similar Questions

• Tecra S11 touchpad hardware replacement

  Hello

  How can I know * what is the number of exact part of my touchpad on my Tecra S11 *-11 H? PTSE3E-XXXXXXX

  It is a little slow, he is sometimes slow to react. I've already implemented in the extended in the mouse settings option.

  where can I buy a new one?

  In my opinion if you want to get any compatible part for all Toshiba laptops, you should contact Toshiba service provider authorized in your country.

  ASP is able to supply all the parts of the laptop. Even if the part is not available, they are able to order the essential part of the Toshiba s doll.

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.

• Tecra S11 - replacement after HARD drive I can't update BIOS

  My HDD in Tecra S11 is dead, and I bought a new SSD.
  Everything works OK, but I can't update the BIOS again. Update utility displays an error:

  Error: Preparation of updated failed.
  You have not given permission to run the update.

  What should do? Help, please.

  > Error: Preparation of updated failed.
  > You have not given permission to run the update.

  You have administrator rights?
  Looks like the issue may be related to missing privileges that are necessary for the execution of an update.

  You can enable the administrator account, follow these steps:
  Choose command line (cmd the black box)
  In the box type net user administrator / Active: Yes
  And then disconnect. Usually, an additional user account should be visible administrator.

  Now, log in using that account and try to run the BIOS update.

  Note: in many cases the VAP (value added package) is required to run the BIOS update.
  Remember also, that the package was decompressed properly before you run the exe file.

• Tecra S11 - nVidia or RealTek audio driver. That you install?

  Tecra S11 nVidia vs RealTek sound driver - which one should I install?

  I installed nVidia and realtek audio driver also. I've got BSOD when I plug headphones 3.5 mm jack. When I want to listen to music with my Bluetooth stereo headset also got BSOD.

  I reinstalled the drivers for card its nvidia and realtek. My Tecra S11 is very slow since I installed the latest video driver from nvidia site nvidia.

  Windows 7 very very slow since then. Start time of Firefox until sometimes 20-30 sec

  Can you please post the exact model name and model number?
  You can find it on Toshiba sticker placed on the bottom of your laptop.

• Tecra S11 - bluescreen when the WiFi switch is on

  I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.

  Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
  Thanks, Guido

  Hey Buddy,

  Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps

  But I had a similar problem last year and the solution was exchanging the WLAN card.

  I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)

• Tecra S11 - 11G - adapter not detected (3G) Mobile Broadband

  Good afternoon

  I wanted to use the modem 3G (ericsson F3607gw), but my windows does not detect the device.
  I ran a ubuntu LiveCD and it does not detect the hardware as well.

  I have a colleague who has the same laptop and the presented material on Device Manager.

  I don't have any equipment not identified on my device manager.

  The laptop is: Tecra S11 - 11G.

  Help, please.
  Thank you.

  Hello

  I assume that the driver of the 3G is missing.
  3G driver is located here in the download area of 3G:
  http://APS.toshiba-tro.de/WLAN/

• Tecra S11 - 11G - external monitor flickers when the Wifi is enabled

  I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.

  If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.

  I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.

  In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.

  > They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new

  That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.

  > A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft

  Of course you are right, but in the reality of things happening.
  My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
  My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturers

  That s my personal opinion in the opinion

  Greetings

• New installation Tecra S11

  Hello

  I am a builder of network and system, so I think I know what I do... well maybe one of you could help me solve this problem
  I'f contacted Toshiba Netherlands but just don't know what to do... then you are my last hope ;)

  History:

  I'f purchased a new Tecra S11 came with BIOS version 1.6 (very old I think)
  removed the original HARD drive and used an SSD instead.
  Installed a fresh WIndows 7 Profecional and tried to get everythink...

  Fist now first I was unable to update the bios to version 1.7/2.0/2.2 (latest)

  Toshiba Netherlands told me that I needed to use the default value provided to Toshiba picture
  and as Toshiba didn't support BIOS update on non-preinstalled-OS... (which is really weird in my opinion!)

  So I replaced my SSD with HDD original (with the original Image) and updating the bios... today to version 2.20 (last)

  Now when I install my SSD with my own Windows 7 installation (installation non-Toshiba) I cannot install m any
  utility provided Toshiba...
  For example, utilities Eco said after launching the setup "Not supported BIOS"
  I ve installed tools all THE Toshiba and patches which ware tinien... but half isn't!

  bottom line, is there a way to "force" the ECO and all other utilities that do not work in a NON-Toshiba installation?

  Any help would be appreciated! I just can t believe / unless there's now way to get a fresh windows install the right way to work
  with all Toshiba Utils!

  Thank you in advance,

  Jacob

  In General, all the stuff you can find on the Toshiba download page are the same integrated in the Toshiba recovery image.
  To be honest I don't understand you at all.

  If your laptop comes with Win7 you can install this image on your new SDS. Recovery image contains Toshiba drivers all important patches and the Toshiba-specific tools and utilities, using this recovery image that you have perfect configured operating hardware and software.

  Therefore, I see a problem only - additional software from Toshiba. No you don't have to use all of it. All you n t need simply to remove from the system. You can delete all you want, but you will still work with OS. After doing this install your favorite software.
  Recovery image Toshiba is ideal for creating a pre-installed OS perfect and optimized according to your own needs.

  To be honest I do the same thing all the time. Believe me to remove the software usually I need any time but at least have exactly what I want.

• Re: Tecra S11 - TEMPRO warns not me on the new drivers

  New drivers and BIOS are available for my Tecra S11 but TEMPRO warns not me.
  Why?

  What drivers do you mean exactly?
  It seems that only the battery Bluetooth, Wlan driver and pilot 3G are downloaded in 2012.
  But these drivers are not released, especially for Tecra S11 but for all laptops which are equipped with such devices so maybe that's the reason why you have not received notifications

  But to be honest, I wouldn't change anything on my system if the system is working properly I always follow the advice: + never change a running system.

• Questions on the Tecra S11 - 11 d wireless

  If Win 7 64. Tecra S11 - 11 d, Intel Centrino Advanced-N 6200 AGN wireless network card,
  Witch wireless is enabled, all tests performed, OK, but configfree who recognize wireless is disabled even if the switch is on. Thus, wirelss remains off.
  I have the drivers updated, update the BIOS, etc..
  Before this problem, I have lived several blue screen unexpected crahe when wireless switch and using a wifi connection. So I suspect that there is a HW poblem, although all the tests are OK.

  Any suggestion?
  Thanks, Guido

  Hi Guido,

  This means that in front of your laptop wireless switch is turned on?
  That's ok, but you can also disable WLAN using FN + F8 key combination. So try to press this key combination to activate the WLAN.

  Check this box!

  By the way: wireless network card appears correctly in the Device Manager?

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• Tecra S11 - broken LCD

  Good afternoon

  I have a toshiba tecra s11-128 with broken LCD screen.
  This model has an LCD with a resolution of 1366 * 768.

  The same series (example: S11 - 11 d) was also equipped with the LCD HD + (1600 * 900)

  I can replace it with HD + LCD screen (resolution of 1600 * 900)?

  Thanks for any response.

  You are right. both models have different LCD displays but the same graphics card. I can't say for sure, but I'm sure you can use the HD screen + with your laptop.

• Defective Tecra S11 - need new notebook with Express-Card-Slot

  My TECRA S11 166 is defective.

  I need a new Notebook with * Express-Card-Slot * and (if possible) RS232.
  What type of laptop comes with an Express Card Slot?

  Hello

  Ago different Toshiba computers laptops on the market and Toshiba release new models at very short intervals.
  I recommend you visit the page of the Toshiba laptop computer product and to compare the models and series available.
  Computers Tecra laptops offer a professional use and Portege series is best in mobile computing.
  The series of satellites is machines of entertainment designed to provide exceptional all-round performance.

  http://www.Toshiba.EU/laptops/

• Tecra S11-128 - hardware replacement

  Hi all,

  I'm sorry for my English not good.

  I have a problem: my Tecra S11-128 pc is dead.

  When the power is connected, the power led is light. When I press the power button, there is no answer. Nothing. Dead.

  I tried to get it repaired in a technical centre, but they said that they cannot fix it.

  On eBay, I found this motherboard: http://www.ebay.de/itm/Toshiba-Tecra-S11-168-Motherboard-Mainboard-fuer-i5-/141290303681?ssPageName=ADME:X:RTQ: A: 1123

  But the description says "Tecra S11-168",

  Is it possible to change the my Tecra S11-128 with the Tecra S11-168? Are they compatible?

  Thank you.

  It seems that two laptop computers Tecra are the same. In other words, they have the same part number (PTSE3E), so I think you can buy it.