Cannot set up the Division of family

Similar Questions

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Cannot set up the claim, provisioning in IOM 9.1.0.1

  Hello
  I tried to configure demand based provisioning in which Admin can ask to set up a resource for a given user. I checked on prepopulate them Auto and Auto Save options in the process definition. The problem I'm facing is that if I uncheck the Auto save option, the admin application is filled correctly and an approval request is generated. If the admin approves it, the status of the resource is set to supply. Inside of the resource object, there is only one task Validation system having a status of completed. The process shape is empty if I see it. But if I go to edit, I can see the fields being filled. After saving the form, I can see the data in the 'View' option too. After that, I add a task "Create User" and available to the user in Active Directory.
  
  But if I check the automatic backup option in the process definition, the request is completed but no approval task is generated. There is nothing in the profile of the user of the resources as well.
  
  What could be the reason for this and what might be a likely solution in such a scenario? I am looking for your help to solve this problem.

  in your return type of custom user code key must be a String instead of long. This problem is known.
  Simply return using a method toString() and valueOf() ultimately.

  ex:

  Take long = getRequesterManagerKey();

  Return String.valueOf (take);

  I'm sure that this will solve your problem

• Cannot set up the printer Pixma MG5720 - need drivers for Windows 8.1

  All I get is a screen of disc and the location search.  Forever. 2nd circle of hell.  What can I do? Help. Desperately looking for tips to find and download the drivers and software for printer.

  My computer is an operating system 64-bit, 64-bit, screen touch, all-in-one, Windows 8.1 x

  On another note, this MG5720 is to replace a Pixma MX432.  These drivers, etc. are always loaded.  Is a / THE problem?  Do I have to remove all the canon navigator incl., solutions, help files, etc...  before the new configuration?   I tried to remove them after logout, but looks like I have to reconnect the old one to do this.  Is this fair? Do I need to bother?

  Those who answered, thanks in advance.  We have little tech savvy are delighted to make you what you are doing.

  Go here and select Windows 8.1

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/inkjet-multifunction/mg-s...

• Having trouble getting lists of reading is displayed on my iphone. I have already implemented the Division of the family and you can see the playlist on my other Mac (I have 2). Also, I have 2 iphones and cannot get the playlists will appear on the other.

  I have 2 macs. Let's call them A and B.

  Every Mac has an iPhone.

  I want to share playlists on A Mac with iPhone attached to Mac B and did not

  I have enabled the sharing of family and you can see the playlists of A Mac on Mac B

  Were unable have them appear on the iPad or the iPhone connected to the Mac B

  Have managed to see the playlists on the iphone connected to A Mac

  https://www.Apple.com/support/homesharing/getstarted/

  Read the guide carefully first.

  Then, make sure you have the same Homeshaing account (Apple ID) entered A and b.

  Enable sharing with in the preferences.

  Each library should appear and look like an icon 'home' in the top left area of iTunes (on both A & B).

  Select the library that has the playlist. Once the loading of the library, select the playlist view.

  Select the playlist that you want to import.

  Choose the area «...» "with your mouse and select"import playlist ".

  The playlist must synchronize with the goal of Mac. Under the iPhone sync settings, choose the playlist you just imported, and then press 'sync '.

• How to set the font "ARIAL" family in the RichTextField?

  How to set the font "ARIAL" family in the RichTextField?

  I saw a LOF of the sample displayed how set the font family in the RichTextField, such as defined as CBTF_FONT.

  But how can I put it as Arial font? If it cannot be, anyone could list a family table of fonts available for use in the Blackberry?

  You are right, for these devices you can use fonts already on the device.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• Router Wifi Smart AC1750 cannot set the full 100 WAN port

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  jjbraunius wrote:

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  Just a heads-up... No domestic router vendors provide ports that you configure manually, they use all the settings of auto-negotiation. So, your ISP will have to adjust their speed of port auto, or provide you a taking router support port speed settings...

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)