L50-A-11 t satellite - cannot set up the audio output

Similar Questions

• Satellite L500-01u012 - problems of audio output

  I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
  When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
  It's really annoying me and I wonder if there is a way around this?

  I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
  I also got the image of the plant cell to try to fix that and its still nto work.

  I downloaded the drivers from the toshiba support site, but they did not help

  Hello

  Is this something new or you have noticed this problem in the past too?
  Generally by default the internal speakers should be turned off when you connect earphones.

  I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

• Satellite Pro A10 - installing the audio driver on Win XP

  I have a computer Satellite Pro A10 and the audio driver is not respected my model above.
  Please send me the audio driver and I have installed window XP
  Thank you

  I found the driver on Toshiba download page...
  http://support.toshiba-tro.de/tools/SatellitePro/spA10/win-XP/sound-SPA10-XP-512013542.zip

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• Satellite T130 - 11 H - NO Audio output device is installed

  I brought this new * Toshiba T130 - 11 H Satellite * (Windows7 / x 64) last week and at first, it was fine...

  Although I now have the speaker icon formidable with a RED CROSS in the lower right of the screen!
  It's become such a pain now - ive never had a problem with the sound with one of the laptops ive had.
  The message error is always 'no Audio output device is installed."

  I have tried everything - system restore, reinstall everything, download different drivers... Pray!
  When going to the Control Panel/Device Manager / sound, video and game controllers - I do not see the:

  Intel(r) High Definition Audio HDMI

  I remember when I got it I got an another "HD Audio Device" in this category - it is the one which has totally gone now and is quite important what I do:

  Please PLEASE please can someone help!
  Is it a hardware failure?
  Is there something I need to download?
  Is there something special I need to

  Will be grateful for any comments. Thank you so so so much to read :)

  Hello

  Go to the Device Manager and in order to choose the hidden devices.
  Now you should see all the devices that are available on this system.

  Now go to the sound, video and game controllers and remove the Intel(r) High Definition Audio HDMI, audio Conexant high definition Smart, etc.

  In system devices, remove the Microsoft UAA Bus driver for high definition.

  Now, restart the laptop.

  After the new operating system reboot Windows should recognize all devices again.
  Check this box!

  If this does not download the Conexant audio driver and reinstall

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Satellite Pro 4600 - installing the Audio driver for Win98 SE

  Hi all

  I m new here.

  I have a Toshiba Satellite Pro 4600 abandoned and I put Win98 SE edition on it.

  The problem I have is I can download the audio driver, but when it comes for her, he asks me a yahama cd that installs, I think its 4 or 5 drivers from the cd. I currently do not have this cd so I was wondering how to get around this problem.

  Thank you for reading

  Tony

  Hello

  I found the Win 98SE driver sound for the Satellite Pro 4600 on the European driver Toshiba page.
  You have to look in the folder to ARCHIVE.

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  He choose: * Archives-> Satellite Pro-> Satellite Pro 46xx-> Satellite Pro 4600-> Win 98SE *.

  In addition to information of Yamaha audio driver, you can find these details:
  + A wide range of audio controls are possible using this audio driver, including: Software Synthesizer, the microphone volume, 3D development and management Power +.

  So I think that this driver should help you!

• Is there a way to set the audio output in mono in Windows 7?

  I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

  Hi Jamsoup,

  I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

  Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

  I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...

• Cannot set up the Division of family

  Hello

  I'm trying to implement the family sharing via iCloud on 10.11 system preferences.  I click on define the family of OU, click on continue, a few times, then told me that I need to add a payment method (even if we have a paypal account already set up). iTunes opens on the payment details screen, where everything is filled out correctly, so I click on Done.  But the family sharing configuration dialog box drops me right on the same screen where, when I click OK, it asks of payment information (again).

  Any thoughts?

  Thank you

  The f

  Try to remove the card and adding it back.

• Cannot set up the claim, provisioning in IOM 9.1.0.1

  Hello
  I tried to configure demand based provisioning in which Admin can ask to set up a resource for a given user. I checked on prepopulate them Auto and Auto Save options in the process definition. The problem I'm facing is that if I uncheck the Auto save option, the admin application is filled correctly and an approval request is generated. If the admin approves it, the status of the resource is set to supply. Inside of the resource object, there is only one task Validation system having a status of completed. The process shape is empty if I see it. But if I go to edit, I can see the fields being filled. After saving the form, I can see the data in the 'View' option too. After that, I add a task "Create User" and available to the user in Active Directory.
  
  But if I check the automatic backup option in the process definition, the request is completed but no approval task is generated. There is nothing in the profile of the user of the resources as well.
  
  What could be the reason for this and what might be a likely solution in such a scenario? I am looking for your help to solve this problem.

  in your return type of custom user code key must be a String instead of long. This problem is known.
  Simply return using a method toString() and valueOf() ultimately.

  ex:

  Take long = getRequesterManagerKey();

  Return String.valueOf (take);

  I'm sure that this will solve your problem

• U940-11N SATELLITE - cannot get into the BIOS or Boot Menu

  Hello

  I am currently in the processing you want to perform an update of the operating system on my laptop. When I bought the laptop in a well known department store, it came loaded with Windows 7, despite the operating system preloaded in Windows 8 when buying.

  I already disabled fast closing down, such as recommended elsewhere on the forum. However, after the closure of many downs and startups, based on all kinds of combination of keys to try to get the menu of boot or bios, I can't do it. It starts directly to Windows.

  I tried to boot from an aswell as a bootable USB external DVD drive.

  I tried F2, F12, F10, ESC and DEL at the start, but nothing. With pressure repeated, with continuous waiting, with the FN button, just in case... just nothing!

  Could someone provide an overview of this please?

  Kind regards
  Jamie

  Thanks for the feedback jamieb!

  Good news!

• Satellite - cannot connect to the Internet

  I just bought a new 750 Satalite, it was working fine, then yesterday the internet wireless connection abandoned and now used to connect again. I have other laptops and they are connected to wifi.

  Someone at - it ideas?

  Hi Vanessa,

  You can't find your new laptop the router or not?
  The wireless network adapter is listed correctly in the Device Manager?

  Maybe something stupid, but did you check if the wireless network adapter is always enabled? You can press key combination FN + F8 to toggle the WIFI connection.

  Check this box!

• Cannot set up the printer Pixma MG5720 - need drivers for Windows 8.1

  All I get is a screen of disc and the location search.  Forever. 2nd circle of hell.  What can I do? Help. Desperately looking for tips to find and download the drivers and software for printer.

  My computer is an operating system 64-bit, 64-bit, screen touch, all-in-one, Windows 8.1 x

  On another note, this MG5720 is to replace a Pixma MX432.  These drivers, etc. are always loaded.  Is a / THE problem?  Do I have to remove all the canon navigator incl., solutions, help files, etc...  before the new configuration?   I tried to remove them after logout, but looks like I have to reconnect the old one to do this.  Is this fair? Do I need to bother?

  Those who answered, thanks in advance.  We have little tech savvy are delighted to make you what you are doing.

  Go here and select Windows 8.1

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/inkjet-multifunction/mg-s...