Cannot set up the claim, provisioning in IOM 9.1.0.1

Similar Questions

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• How the user provisioning automatically IOM

  Hi all
  I joined IOM to DIO by DIO connector, now I want to set up that user IOM is automatically configured for oracle ldap as soon as I create a user using the IOM administration console account, what should I do? could u give me some detailed instrution?
  Thanks in advance.

  Hello

  Go to design console-> resources-> rule Designer management

  . Give the name of rule
  . Select general in the Type
  . Click on add rule, then slelect user profile data and give value to automatic accession.

  You can define your rule here. For example
  Agency name = IT

  Please let me know if you have details.

  Concerning
  Nitesh

  .

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Cannot set up the Division of family

  Hello

  I'm trying to implement the family sharing via iCloud on 10.11 system preferences.  I click on define the family of OU, click on continue, a few times, then told me that I need to add a payment method (even if we have a paypal account already set up). iTunes opens on the payment details screen, where everything is filled out correctly, so I click on Done.  But the family sharing configuration dialog box drops me right on the same screen where, when I click OK, it asks of payment information (again).

  Any thoughts?

  Thank you

  The f

  Try to remove the card and adding it back.

• Short Studio 3.0 cannot connect to the Service Provisioning

  Hello!

  After installation short 3.0 on Windows 2008 R2, the only box with Tomcat for the Studio, entering into the JSON string into the studio for Provisioning service, all I get is "Unable to connect to the Service of supply".

  String in JSON format:

  {

  "port": "8881."

  'server': 'localhost '.

  }

  I can connect in console Weblogic (localhost:8881 / console) for commissioning without problem and the green box appears with health = ok.

  Any ideas on what could be causing the problem?

  Thank you!

  Gordon

  It seems you are trying to use unsecured communication (non - SSL) between the Studio and the commissioning Service, but your configuration maybe isn't correct.  See the following: http://docs.oracle.com/cd/E39271_01/studio.300/studio_install/toc.htm#Configuring%20the%20Provisioning%20Service%20for%20non-secure%20%20%20communication.

  In particular, ensure that in your plan, the value of the variable transport-guarantee is 'NOTHING' and the value of the protected-url-pattern variable is ' / DISABLED ".  If these settings are not correct, you may experience the problem you are experiencing.  Note that the case is important.

  RLJII

• Cannot set up the printer Pixma MG5720 - need drivers for Windows 8.1

  All I get is a screen of disc and the location search.  Forever. 2nd circle of hell.  What can I do? Help. Desperately looking for tips to find and download the drivers and software for printer.

  My computer is an operating system 64-bit, 64-bit, screen touch, all-in-one, Windows 8.1 x

  On another note, this MG5720 is to replace a Pixma MX432.  These drivers, etc. are always loaded.  Is a / THE problem?  Do I have to remove all the canon navigator incl., solutions, help files, etc...  before the new configuration?   I tried to remove them after logout, but looks like I have to reconnect the old one to do this.  Is this fair? Do I need to bother?

  Those who answered, thanks in advance.  We have little tech savvy are delighted to make you what you are doing.

  Go here and select Windows 8.1

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/inkjet-multifunction/mg-s...

• Cannot get the claim code and restore Apps

  I have an Officejet Pro 8600. I managed to install the printer and print the claim code and linked to my account. For some reason when I log into my account it shows not the printer. Also when I go into Control Panel, I can not access all the menus via the icon "eprint" or the "apps". I get the error message is "the eprint feature has been disabled" and "the Apps feature has been disabled. I can't turn them on and I cannot print another application code to connect the printer to my account.

  This is the funniest! I can always send an email to the printer and it prints!

  Any ideas that I am totally lost on this one and want to go back on these characteristics.

  Thanks in advance

  ADE

  Hi Deeperdown,

  Thank you for the information, it is much appreciated.  Your statement of "service is disabled and contact the administrator" is very informative.

  Could you please check your administrator settings in the built-in web server (EWS) for the printer? There is an administrator setting that allows to disable web services.  If you do not know how to access the built-in Web server steps lie in your on page 232 user guide in the section titled "to open the built-in web server".

  Once you have the Web integrated server open please click the 'Settings' tab then click on "Administrator settings" in the left side menu (see screen capture below).

  

  That should bring up a page similar to the screenshot below.  Please ensure that the Web Services, ePrint, and Apps all have.

  

  Once those who are turned on, please turn your printer off, wait 15 seconds and then turn on the printer.  You should now be able to access the web services menu and get your back ePrint.

  HP Officejet Pro user guide 8600

• OID provisioning with IOM and the addition of a custom multivalue attribute

  Hello - I have a class of the custom object that contains an attribute with multiple values (e.g. mymultiattribute1). I wish that this attribute was available on the form of OID process on the UD_OID_USR main form or child form UD_OID_RL. The idea is to have IOM admin add values or update the value of this attribute for example during the OID commissioning of the admin user account IOM should be able to add value1 and the value 2 to this attribute (similar to the role of the OID connector assignment feature). Since this is a multivalued attribute, so I think it must be a form of child? Correct me if I'm wrong.
  
  Guys please can you me how to configure IOM to achieve? Now that we do not have the cycles to customize the connector (i.e. coding), so we are looking to set up the system of the IOM or use existing functionality of OOTB, maybe configure feature role assignment for our objectclass and attribute in the IOM is the option?
  
  Thank you
  
  Additional information on the functionality of role OID which might be useful for your answers :-)
  
  The table Lookup.OID.Configuration contains the following three parameters which I believe are associated with roles.
  
  ldapRoleDNprefirx = cn
  ldapRolememberAttr = roleOccupant
  ldapRoleObjectClass = organizationalRole
  
  The table AttrName.Role.Prov.Map.OID contains the following parameters:
  
  Role name = cn

  You will need to follow adding attributes to new for commissioning multiple values before you start on to update for Provisioning new multivalued attributes

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• Router Wifi Smart AC1750 cannot set the full 100 WAN port

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  jjbraunius wrote:

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  Just a heads-up... No domestic router vendors provide ports that you configure manually, they use all the settings of auto-negotiation. So, your ISP will have to adjust their speed of port auto, or provide you a taking router support port speed settings...

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23