Cannot shut down Windows 10 laptop with power button / stop

I have a laptop Aspire E5-532 with Windows 10.  I have configured the power management to turn off the laptop when I push the power button.

It does NOT work.  When I push the power button, nothing happens.

Help!

I thought about it.  Press the button for a few seconds so that the system recognizes the button push!  When cela all functioning properly.

Tags: Acer Laptops

Similar Questions

  • Cannot shut down Windows XP properly.

    I have a portable satellite 1110. I am facing a problem then the closure of the system. When I try to stop the system hangs on the blue screen saying "closing windows. I have to manually shut down the system.
    Any help on this would be appreciated.

    Hi Roohbir,

    It is very difficult to say EAL is causing your problem since there are so many causes to consider. However, you may find it useful to read the following article. Just enter "Shutdown problems" in the search box.

    http://aumha.org/KB.htm

    HTH

  • Satellite A60 Shuts Down immediately after pressing the Start button / stop

    My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

    This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

    I tried all combinations of use power supply and battery for power. Non of them works.
    Is there a had the same problem or have any diagonistics for this problem.
    Thank you

    Emrah

    Hello

    Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
    You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

    But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

  • Suggestion: Firefox would not hold up to a shut down windows with a close multiple tab dialog box.

    I didn't know where to send a suggestions, so he posts here. Please redirect it to the appropriate location.

    When I shut down windows and firefox works with several tabs, it pops up a dialog box and prevents the closure of windows. Last Friday, I shut the computer down before leaving work and found that it was still on when I went back to work Monday. Reason - Firefox.

    I prefer computers stop when I am away for an extended period of time to save energy.

    Tools > Options > tabs: [] "warn me when closing multiple tabs".

  • My computer shuts down is no longer with button closure

    My computer shuts down is no longer with button closure. Works only with button on the computer case.

    * original title - system update updates microsoft windows *.

    Hello

    1 are there any changes or updates made on the computer?

    2. what operating system is installed on the computer?

    3. what happens when you try to shut down the computer?

    4. do you get an error message? If Yes, what is the full and exact error message?

    Step 1:

    Try restarting your computer in safe mode and check if the problem persists.

    a. restart your computer.

    b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

    c. using the arrow keys, select the Safe Mode option.

    d. press the Enter key on your keyboard to start Windows Safe Mode.

    e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

    f. check if you still have the problem.

    If it works fine in safe mode try performing a clean boot in order to find the cause root.

    Step 2:

    See the article about how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.

    If the problem is not resolved, please provide more information to help you best.

  • How we shut down windows?

    How can we stop windows? Replay for me to stop windows. You can do this.

    Hello

    Sorry for the late reply. You have asked how to shut down Windows but did not mention the version of Windows you are using.

    However, check out this link if you are using Windows 8. Respond with more information so we can help you in a better way.

    Thank you.

  • When I shut down windows I get a pop-up message from Web page

    When I shut down windows I get a pop up message saying-Web page

    "Doesn't not loading skin name 'Talk Talk' the"shell.css"file is necessary in your" sscommon, skins, talktalk, css / ' directory. ". To resolve this problem, please check the name of skin in your config file, or re install the application. »

    What it means?

    Well, I go back to them and tell them you can send and receive mail, but then with them, indicate the exact error message and ask him what is the file that is supposed to be missing.  Its clearly a talk talk question, since talk talk generates the error message.

    Steve

  • When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

  • How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

    How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

    Hello jsitch,

    This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

  • Network problem between Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

    Original title: network problem!

    How can I get my laptop with Windows 7 Home Edition to connect to my desktop with Windows XP on it. I have a router Linksys WRT54 plugged directly to the desktop via ethernet and my laptop has an excellent signal but I can't access programs or the printer with it. I know the 'host group' on 7 but XP isn't that. Are there alternative than to put 7 on my desktop? Any suggestions?

    Thank you!

    Hello

    Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

    According the description of the problem face you connection problems in Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

    Residential group option is available on Windows 7 and Windows 8 operating systems. However, you can see the following article for more information on the connection of Windows 7 and Windows XP computers:

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Professional information package launched by mistake on my Mac. Since then, the computer is out of order.  The app is always open to the dock, but cannot close or force quit it. Power button doesn, t make a stop. Computer is NOT frozen, but apps does not

    Professional information file on my Mac. Since then, the computer is out of order.  App always opens in the dock, but cannot close or force quit it. Start button / stop is not make a judgment. Computer is NOT frozen, but apps does not open. Cannot shut down, restart, or use something else! Help!

    If you hold the button power for more than 10 seconds, it will not shut the MBP?

    Try a SMC reset:

    https://support.Apple.com/en-us/HT201295

    Ciao.

  • Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

    Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

    MacBook, 2010, Mac OS X 10.6.8

    Hi Veronica Steward,.

    I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:

    If your Mac will not turn on - Apple Support

    Let us know how it goes and thanks for coming to Apple Support communities.

    See you soon.

  • 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

    I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

    When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

    I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

    Thank you.

    It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

    Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

    But to be sure...

    Which converter AD / DA are you using?

  • Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

    (143868)

  • 27 "2013 mac only shut down using the power button / stop, is this a problem or a part of the new system

    After my upgrade that Mac is not closed by using the drop-down menu option, it also seems to crash the finder.  Finder raises with force quit.  I can only shut it down using the power button.  Is this a bug/problem of a part of the El Capitan?

    Wacom tablet software is known to cause this problem. Options:

    Uninstalling the Wacom software

    Completely and remove items from connection

    The Wacom driver update

Maybe you are looking for