Cannot shutdown computer

Similar Questions

• When I shutdown computer after a few minutes his restarts automatically

  When I shutdown computer after a few minutes his restarts automatically

  Try this... you can first unplug your cable ethernet and if it does not restart... here may be the problem. The following has worked for me, but I tried not to disconnect the cable first.

  Open network and sharing Center

  In select it left panel > change map settings

  Right click on Local area connection > properties > configure

  Advanced tab

  The title of the property (listbox):

  Select > Shutdown Wake-On-Lan

  In the value (drop down list): (change) turn off

  I hope that helps!

  Jason

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• Unable to shutdown computer.

  Hello

  I wonder why my PC did not turn off when I used normally close before.
  my PC specs: P4, 2 GB RAM, win XP OS.
  I run TuneUp utilities and command "chkdsk" in the BACK, it actually works, but after 1 or
  2 days, same problem. Can you tell me the reason and the solution for this
  problem?

  Thank you.

  Cklyde

  Hello

  Please follow the steps in the below link and get back to us with the results.

  Advanced Troubleshooting for shutdown problems in Windows XP

   

  http://support.Microsoft.com/kb/308029

   

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope that helps!

• Satellite A200-J01: Startup Repair cannot repair computer automatically

  Hi all

  I can't get my laptop to start. I am currently traveling overseas and
  I was hoping that someone may have met or know of this problem.
  It has always worked well and the only thing I did everything differently when using the laptop here is you connecting to the internet to /cafes of hot spots and watch DVDs (copies pirated in Bali) so I was wondering if any of them can cause this problem of startup repair.

  When you turn it on it tells me that...

  "Startup Repair is checking for problems of system" then...

  "Startup Repair cannot repair this computer automatically.

  When I look to see what the details of the problem, it's that I get...

  Problem event name... "StartupRepairV2.
  Fallback 6.0.6000.16386.6.0.6001.1800
  6
  786444
  Corrupted volume
  no cause root

  I appreciate any comment beforehand, as I am now carting round a laptop dead!

  Thank you

  First of all, it would be interesting to know something about your laptop. What model of laptop do you have?
  Have you tried starting in safe mode using the F8 key?

  Some new notebook series is equipped with HARD drive recovery. IF you can try to press the F8 key immediately after you have switched on the laptop, then choose fix my computer and try the laptop recovery

• Recovery Manager cannot restore computer using the original image

  Hello

  I'm working on a Pavilion P6000 desktop series (WW639AA).  Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk.  I tested the hard drive and all past.  However, when I run the Recovery Manager and try to restore the computer, I get the following error:

  «Recovery Manager cannot restore you computer using the original image.»  Contact HP support.  ' Error #0xe0ef000e.

  All of the suggestions.

  Thank you.

  blewettjl,

  A disk that has been 'cleaned' will have this error with HP rated DVD.

  HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en

• OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

  Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

  Any suggestions?

  Hi @dburbage,

  I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

  Thanks, I look forward to hearing back on your part.

• When I shutdown computer it stays on

  When I try to shut down my computer, the power stays on I have to actually push the button. is there a solution? Thank you for advice or info!

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all drivers are updated, especially on Windows Vista and Windows 7.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796
  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues. MS - MVP - Elephant Boy computers - don't panic!

• Cannot start computer? vill will not accept my code

  When I start my computer, it says - will not accept your profile and can not start and I tried many Jules Destrooper. O (sorry my English not good...)

  Hello

  There may be help here in a better language for you - Up at the top where it is said to the United States - English - click
  that and look at the other languages.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot put computer to sleep without blue screen and crashed

  Hi guys, in the 3 months that my PC has been having this strange problem where seemingly randomly it selects to the blue screen and crashed. A few times, it was when I was not even at the computer, and no programs were running. Most of the time there will be a few moments after that, I chose the option to sleep, but also took place after I choose restart.

  My specs: Windows Home Premium 64-bit

  Intel core i3-4130 3.4 GHz

  8192 MB RAM

  2 AMD Radeon Crossfire 7790

  I thought I should also mention that I use a TV 48 "as a monitor screen.

  This is what usually happens after that my PC is recovering from the accident

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1: FFFFFFFFC0000005

  BCP2: FFFFF8800F1256B5

  BCP3: FFFFF8800BD51308

  BCP4: FFFFF8800BD50B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\042315-6193-01.dmp

  C:\Users\Corey\AppData\Local\Temp\WER-28563-0.SysData.XML

  I really appreciate any help I could get with this. Thank you!

  It seems that you have an unstable BETA AMD driver installed.

  Value of the element
  Name AMD Radeon HD 7700 Series
  ID of device PNP PCI\VEN_1002 & DEV_665C & SUBSYS_E253174B & REV_00\4 & 2F87A1B6 & 0 & 00E4
  Adapter Type processor AMD Radeon Graphics (0x665C), compatible with Advanced Micro Devices, Inc.
  Adapter Description AMD Radeon HD 7700 Series
  Adapter RAM 1.00 GB (1 073 741 824 bytes)
  Installed drivers aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  14.501.1003.0 driver version

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  Crash details.

  The debugging session: 16:32:23.495 Thu May 7, 2015 (UTC - 04:00)

  Loading user symbols
  Loading unloaded module list
  .......
  Cannot load the image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys

  06/05/2015 15:49 Windows Error Reporting bucket Fault X64_0x7E_atikmdag! OsServices::pOsServices + 5, type 0
  Event name: BlueScreen
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\050615-6411-01.dmp
  C:\Users\Corey\AppData\Local\Temp\WER-15350-0.SysData.XML
  C:\Users\Corey\AppData\Local\Temp\WER869.tmp.WERInternalMetadata.XML

  & #x000a

  Please go back to a previous version of the driver, linked below.

  Display Driver version 14.301.1001
  Driver OpenCL (tm)
  Catalyst Control Center
  HydraVision

  http://support.AMD.com/en-us/download/desktop/previous/detail?OS=Windows%207%20-%2064&Rev=14.9

• shutdown computer a Windows 8 remote

  I have a small network with Windows 7 computers and one running Windows-8.
  How can I remote computer to shutdown the Windows 8?

  I used to run cmd: shutdown /s /m \\

  even when I click with the right button on cmd and run as administrator, my Windows 7 computers
  Gets the access denied (5)

  All computers have the same username and password as an administrator.
  I activated the strategy to prevent "Force Shutdown from A Remote Machine. in the SECPOL tool on the Windows-8 machine.

  How can that be resolved? without configuring a RDP session.

  Hi Henk,

  I suggest you to return the item and check if it helps.

  Restart or shut down a remote computer and document the reason
  http://TechNet.Microsoft.com/en-us/library/cc770416.aspx

  If the problem persists, I suggest you send the request in TechNet community for assistance.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking#Forum=w81previtpro&filter=AllTypes&sort=lastpostdesc&content=search

  Hope this information helps.

• Satellite Pro A40: Xp Pro cannot see computer Tab to change domain

  Hello

  I'm looking to the A40 with XP Pro SP2 to date, I need to change the field that he is currently using a new domain.

  It opens a session on laptop and works perfectly with its current abc1 area but I need to change that a new field of abc.

  When I right click on my computer-> properties on the computer name tab is missing...

  I looked all over the internet and have tried a few things and need help...

  Is there a tool to restore this item...------looked in regedit and there seems to be something blocking (I am ware you can access from the exit ramp)

  I'm loging on the computer with admin rights complete, existing domain or through local administrator rights.

  I changed 5 other A40 to the new domain without problems...

  Go a little crazy on this one... any help would be good...

  B

  Hello

  It s very strange because I have never seen this tab or another might be hidden.
  I put t know why this is happening, but you can try to use the WinXP System Restore tool.
  This tool allows you to roll back the OS to the beginning.
  Maybe then you will see the computer name tab.

• Spectrum x 360: with shutdown computer (spectrum x 360) battery Drain

  Hi guys.

  I have a problem, I just bought a new spectrum x 360 and the battery is dripping after perfom a FULL stop and COMPLETE (no sleep or hibernation). After 10hs I lost 8% of battery, all drivers are up to date as well as the BIOS.

  I had this problem with my Lenovo Yoga 3 11, and after updating the BIOS, I have corrected. I've read it seems to be a problem with W10 and some drivers, but not all laptops there.

  Guys, any idea?, by the way, I already disable the fastboot which seems to be a solution in the same case, but not in mine.

  Thank you!!!

  I found the solution, I have BIOS there is an option which is enable, is one that provides energy to your USB devices, even if the computer is off.

  After you turn off this feature the drain stopped, I had a mouse receiver pluged in...

  Thank you

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• Cannot run computer games of Casino II - CD is compatible but the program will not open and run.

  System shows that Casino games II is compatible with the system.  Always impossible to get from the program.  My system is 64 requires 32 to run.

  Hi Donna,.

  The CD yourself that run other games or programs - in essence, are CDs recognized beiing and works in general?  When you insert the CD, the Windows Explorer recognizes it as being there and you are able to explore the folders and files of the CD?  That is the only question when you click Run, it won't work?  Are you sure that it can run from the CD?  Maybe it should be installed on the hard disk of the computer or installed on the computer instead of clicking on run from CD.

  Another option is to contact the manufacturer of Casino II games and see if their technical assistance service or other technical support options can help you with this problem.

  I hope this helps.

  Good luck!