Cannot sign in Administrator profile

Similar Questions

• CANNOT ACCESS THE ADMINISTRATOR PROFILE MY OFFICE BECAUSE I FORGOT MY USERNAME/PASSWORD TO ACCESS OR MAKE CHANGES. IT COMES TO MY LAPTOP.

  I'M ONLY in MEASURE of ACCESS to SYSTEMS / PC USER ACCOUNT, I NEED TO GET IN the ADMINISTRATOR ACCESS

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM. MS - MVP - Elephant Boy computers - don't panic!

• Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

  See if the following can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do the system restore.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• Corrupt Windows 2012 R2 Administrator profile

  Hi all

  I logged on my current server to run Windows 2012 r2 level one day and a new profile of the administrator is created.

  C:\Users\Administrator\Desktop, I see clearly my original files, but the current Administrator profile is directed to C:\Windows\System32\config\systemprofile\Desktop

  I tried:

  (1) deletion and recreation of the account administrator profile using another account has administrator (System Settings Advanced-> advanced-> user profile tab) rights.

  (2) to make scanning of virus/malware

  (3) Regedit to change the value or values of ProfileList (https://support.microsoft.com/kb/947215?wa=wsignin1.0)

  Nothing can make me "point back" to the original Administrator profile I want to have. Whenever I log into admin account, it just go directly to C:\Windows\System32\config\systemprofile to load the profile.

  The main problem is that I can't use desktop connection remote, which is crucial for my operations. The error dialog box pops up just indicating that Remote Desktop cannot be connected. I did a check and my ddns account works fine.

  Please do not asked to re - format or system restore. I had reasons not to do so.

  Anyone?  Help...

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Cannot type my regular profile on my computer.

  Whenever I try to connect to my computer it send me to a temporary profile and I don't know how to solve this problem.

  Can someone tell me what to do or who to contact to get this problem fix it please?

  My equipment information:

  I use a laptop without an internet connection at the moment and is running using Windows 8.

  Hello

  This should help you.

  "How to fix"You have been connected with a temporary profile"error in Windows 8 and 8.1 .

  http://www.eightforums.com/tutorials/38817-you

  And this can help you too:

  "How to fix ' service user profile Service failed the sign-in user profile cannot be loaded." Error in Windows 8 and 8.1 "

  http://www.eightforums.com/tutorials/38838-user-profile-service-failed-sign-fix-Windows-8-a.html

  See you soon.

• DPS App Builder Mac - files download .ipa .zip of error - cannot sign the application

  I'm about to go crazy with this DP App Builder error:

  -Buil-in App a simple edition

  -Application created within DPS App Builder with no problems

  -After finishing, I always get a download error the .ipa or the .zip saying:

  "Cannot sign the application. Check the certificate files are correct, then try to recreate the folio and a new application and try to download the application again. »

  After reading similar problems, I generated certificates more than 10 times, in different computers and nothing, still the same error.

  I followed the tip of Adobe in order to avoid special characters in the names of articles. Created the Folio Builder app. Nothing...

  Any ideas? Any help, please?

  Hi Christophe,

  Thank you for your message.

  But, in fact, I just finished for trash in the folio and re-created a new.

  And I say, that it was not easy because I took several hours, this...

  Try to create the application again WITH THE SAME CERTIFICATES AND MOBILE PROVISIONING PROFILES.

  It worked.

  He wasn't a certificate problem, it was a problem from Adobe!

  Files and InDesign documents are the same. Everything is the same.

  The worst part is that the DPS and Adobe process give us a hint about what might be wrong.

  Nothing... the only way is to wast hours and hours to search the forums and trying to test all kinds of things without knowing what is happening...

  However and once more, I thank you for your response.

• Cannot sign the application - cannot find the signature key file: author.p12

  Hi all.

  I have seen this error on several messages in the forum, but none of the suggested corrections works for me.

  I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and followed the registration procedure. The author.p12 and other files exist in %HOMEPATH%\AppData\Local\Research In Motion

  However, when I try to run the following commands, it fails. I also tried to use the graphical help of BlackBerry Tablet OS and I get the same error.

  The only thing I noticed is if I run: echo %homepath%, the result is:------. I can't change what I am on Windows 7 on an Active Directory domain and any changes made to these environment variables does not stick.

  Is there a way to specify the path to the author.p12 file? Help, please! The output is below:

  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>bbwp C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\third_party\node\windows\node.exe" "C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\lib\bbwp.js" C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  [BUILD]   Populating application source
  [BUILD]   Parsing config.xml
  [ERROR]   Cannot sign application - failed to find signing key file: author.p12
  

  Thank you.

  Jon

  I corrected myself. I realized all I had to do was to create a local user (no AD) on my machine, copy RIM folder my HOMEPATH to HOMEPATH to the local user, then run cmd.exe as the local user and sign the binary file. Worked fine!

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• WebWorks & ripple: package & sign: cannot sign the application - could not find signature keys

  Hello

  I am developing a prototype for my company using ripple and Webworks.

  If I package it without signing my BB returns an error "must sign this."

  If I try to sign, I get an error "cannot sign the application - could not find signature keys.

  Somewhere on the net, I realized that I am required to buy RIM signing keys, is this true?

  Is it possible to have temporary keys for testing purposes?

  Thank you

  Roberto.

  Signing keys are free and available here

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• BlackBerry Tablet OS graphical help cannot sign the application

  I use BlackBerry Tablet OS graphics helps convert the apk to bar. It convert the application but cannot sign the application.

  Here's my output of the operation

  Batch process Bar signatory began...

  -------------------Fling.bar-------------------
  Signature with the key to the RIM...
  java.lang.NoClassDefFoundError: com/trustpoint/asn/AsnChoice
  at java.lang.Class.getDeclaredMethods0 (Native Method)
  at java.lang.Class.privateGetDeclaredMethods (unknown Source)
  at java.lang.Class.getMethod0 (unknown Source)
  at java.lang.Class.getMethod (unknown Source)
  at sun.launcher.LauncherHelper.getMainMethod (unknown Source)
  at sun.launcher.LauncherHelper.checkAndLoadMain (unknown Source)
  Caused by: java.lang.ClassNotFoundException: com.trustpoint.asn.AsnChoice
  java.net.URLClassLoader to $1.run (unknown Source)
  java.net.URLClassLoader to $1.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  ... 6 more
  Exception in thread "main".
  -Completed: 0 minutes: 0 dry -

  Batch process Bar signatory resulted in the: 0 minutes: 0 seconds

  Summary:
  Total number of found unsigned bars = 1
  Total number of bars successfully signed = 0
  Total number of signatures has no bars = 1

  Please give me answer its very urgent.

  Thanks in advance.

  This is caused by a bug in the 1.5.0 packaging Android tools.  To resolve the problem, upgrade to version 1.5.2 .

• Cannot sign the files completely. Error: package projects 99%

  Problem:

  Cannot sign the files completely.

  Errorackaging 99% of the projects.

  Does anyone know how to solve the problem or that have this kind of experience?

  Thank you for your attention.

  Perhaps the signature server failed in time?
  check
  isthesigningserverdown.com
  and the signature of the retry.

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• Cannot, sign, only get a white screen, is there something wrong with the application?

  Cannot, sign, only get a white screen, is there something wrong with the application?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• Player cannot sign a pdf signature field

  Hello

  I am using LiveCycle Designer V 8.2.1

  I added a signature field in a new form I created.

  The problem is that you cannot sign the PDF in Reader X. It doesn't do anything.

  I have another form that was created by another user who is no longer there, and you can add the signature.

  When I open it is Acrobat 9 Pro, I can sign.

  Any ideas on what I am doing wrong?

  You cannot digitally sign a PDF document with player UNLESS the PDF has been "Reader Extended".  This can be done using LiveCycle ES2 Reader Extensions (Server product) or Acrobat Professional X (file > save as > Reader extended PDF)

  Concerning

  Steve