Cannot start & could not repair

Similar Questions

• Error computer repair at each reboot of Windows Vista. Startup Repair says error ""could not repair.

  Original title: problem at startup

  Whenever I start my system, using windows 7 Ultimate a message for repair (recommended) or windows to start normally. When I go for repair, there nothing give a message "could not repair' why?

  Hello

  1. are you able to boot to the desktop?
  2 have you made any changes to the computer before the show?
   
   
   
  Method 1: Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  Reference: http://windows.microsoft.com/en-US/windows-VISTA/Startup-Repair-frequently-asked-questions
  
  Method 2:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:
  http://support.Microsoft.com/kb/934540

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• Visual Foxpro cannot start. Not enough memory.

  I use Win 7 and this message appeared suddenly "Visual Foxpro cannot start. Not enough memory. "the program worked well before.

  Hi len_johnstone,

  I suggest you to consult the following MSDN link and check if it helps.

  Cannot start Visual FoxPro: http://msdn.microsoft.com/en-us/library/aa976626(v=vs.71).aspx

  It would be better to post the same question in the Microsoft MSDN forum for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the information is useful.

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Developer SQL won't start could not install some modules

  I just installed the Java JDK and JRE 7u51 7u51. After that I extracted SQL Developer to a fresh directory. When I open SQL Developer, I get the following error message:

  Warning - could not install some modules:

  JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.

  Cache - module named oracle.javaxide extensions was needed and not found.

  Cache - module named oracle.ide extensions was needed and not found.

  Actions - the module named oracle.javatools bridge was needed and not found.

  Actions - the module named oracle.ide bridge was needed and not found.

  No idea why I get this message? I installed it on my laptop without a problem.

  Yes, I was going to suggest trying to hook the zip files - directory fees/empty of course.

• Cannot start Windows & startup repair does not work!

  I have Windows 7 Home Premium installed on the HP DM4t laptop. My laptop can not restart. I tried using the reapir drive system but it shows some loading filed and I got a black screen with the pointer (arrow). It remains like this for hours and hours (4 to 6 hours), but never get to "System Recovery Options". I'm not able to boot in SafeMode as well. I'm trying to recover the OS using the Factory Reset but ii can't at this point because it won't let me get to "System Recovery Options".

  So far, I've tried repairing the system by clicking on F8, try using System repair Disk, try to use 7 set of DVD disc burn with the image of the system, tried in all cases that I get genuine Windows 7 OS DVD - tell screen load files of windows and that the black screen with the mouse pointer (arrow). I am not able to achieve "the System Restore Options."

  Model number: WD533AV
  Description of the model: HP PAVILION DM4T - 1000 NOTE
  Serial number: [personal information]

  HP Pavilion dm4t Entertainment PC
  • Genuine Windows 7 Home Premium 64-bit
  Dual Core processor • Intel Core i5 - 430 M (2.26 GHz, 3 MB L3 Cache) with Turbo boost up to 2.53 GHz
  • Intel HD Graphics [HDMI, VGA]
  • 4GB DDR3 (2 Dimm system memory

  I tried the break-in for HP Advanced System Diagnostics Test, test

  Memory test - passed

  SMART Check - spent

  DST short - failed

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  Hard drive 1

  Running test - failed

  ----------------------------------------------------------------------------------------------------------

  Memory - test passed

  ----------------------------------------------------------------------------------------------------------

  Hard drive test

  Test Drive: 1

  Smart Check: spent

  DST short: failure

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  ----------------------------------------------------------------------------------------------------------

  Main BIOS HDD test

  Hard drive 1 fast (303)

  Not sure if it of a mistake or not.

  My laptop is almost 2 years old and have no warranty left. Any help will be appreciated.

  According to the information you provided, as shown below;

  Hard drive test

  Test Drive: 1

  Smart Check: spent

  DST short: failure

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  Your hard drive has failed or is about to fail and will need replaced. Based on maintenance and Service of Guide for your LAPTOP of HP PAVILION DM4T - 1000, you will need a 2.5 "SATA with a form factor of 9.5 mm (3/8"). Make sure that you have a set of HP recovery discs for your computer before continuing.

  Please send Bravo

• SFC/scannow found he could not repair corrupted files

  Running Windows7 32 Bit

  Found several Pots every 5 to 7 years in which this issue; hoping that there may be a newer better way to solve the problem... so seconded and fingers crossed.

  * PC froze

  * Powered off / Powered it back on

  * Selected Normal boot started fine on the desktop PC

  Decided to run sfc/scannow.  "At the end it read: Windows resource Protection found damaged, files but was unable to solve some of them.

  Looked at the log CBS.log file.  It might take some time to review and even if I saw it that I would not be able to choose the corrupted files, nor know how to find and replace... and don't know if I was smart enough for that I could even remove and replace the files of the operating system.

  I realize I've read in some real old Posts on this topic, maybe some corrupt files are not really necessary or important... but I'd rather have a good job of OS.

  So is there a way to better\newer to resolve this issue... instead of finding what could be one is necessary in the files of the boot of Hay, then looking for right files to replace those damaged?

  I note an In BONE repair on-site... that worries me, because the software just doesn't do well after a repair on the spot.

  Looking for replacement option, and eager to have a BONE without corrupted files and corrupt files... If on-site repair is my only way to go... What are the actual steps not excluded... I have my original Windows7 DVD...

  Haven't tried using the system restore, given that this feature would not replace the corrupted files back to a previous restore point...

  Very well.

  Marking of my previous response as RESPONSE will officially close your thread.

  

  PS: Wouldn't mind a USEFUL vote while you're there either.

• My older EOS Rebel is dead. I just got back from canon, they said that they could not repair becau

  Canon cannot repair the camera because the lifetime has expired. Now what?

  It's understandable.  At some point they stop making parts for gear very old and will run finally out of these parts.

  Did tell you about the Canon loyalty program?

  Don't throw away this broken device!  Offers in the change of loyalty on a regular basis, they do not post details on the Internet, but if you call Canon, they can tell you about the program and all current offers available.

  They will allow you to trade in your non-working for a newer camera (which may be a camera refurbished - but remember that same refurb Canon come with the same 1 year warranty which would have a new camera).

  The program allows you to get a newer model of the camera for significantly less than it would cost to buy otherwise.

  .. .and of course... these new cameras will have greatly improved performance.  ISO in DSLRs performance have improved considerably over the years.  You will enjoy probably have quite a camera body more up-to-date.

  The new bodies use all the same EOS lenses - so no worries about the compatibility of the goal.

• automatic repair of Windows 8 could not repair your pc

  I recently bought a new 3 TB hard drive for my computer to add to my system. I installed without a problem and has used the software that came with the drive. For reference, I added a Seagate SATA drive 3TO. I cloned my original 2 TB drive on my new drive because I want to use it as my main drive for windows. No problems showed up after it was complete. My records all use MBR and I have very little experience in creating the partitions. I have partitioned my drive and was designed to use the extra space after the 2 TB limit has been reached.

  In all cases after a few days I decided to perform a new installation of windows and my recovery disk that put back me in windows 7. My recovery partition is set for windows 7 and I started the migration to windows 8. After completing the installation of Windows 8-re, I ran the seagate software to allow me to use the extra space on my HARD drive but after restarting my computer finds the option of automatic startup and recovery States that he is unable to fix the pc.

  I tried a few different options to no effect but my attempt to enter a system restore point, I noticed the Seagate Software did a restore point so I started this earlier period.

  It is a new installation of Windows 8. I have not yet loaded Windows 8.1 as all I have is the DVD of Windows 8 and Windows 7 recovery partition. I decided to try another new facility once again with the same result. I have a 3 TB drive, which has been cloned my original 2 TB disk. My 2 TB drive is wiped with 1 single partition and my new 3 TB drive has a system partition, the OS partition and a recovery partition. In addition, I now have a portion that is not attributed, that I'm unable to access and if I activate Windows finds an inevitable auto repair with no option but to remove the Seagate Software. My question is this, can I use this 3 TB drive as my main drive and be allowed access to all the data or I'll need to come back to used my original drive as the OS drive. I would avoid using my original drive because my new drive is faster.

  This issue has been resolved itself, I have reformatted all my readers and did install a clean Windows 8. After reading on the 2 TB limit I found that changing a few settings in my BIOS allows me to use the full 3 TB in Windows 8. I tried to save the Windows 7 recovery partition which has been installed by HP, but thought to remove the partition would be the best option. After formatting the drive, everything works as expected but Windows did install 2 partitions, that I don't already know, it's a recovery of 300 MB partition and a 100 MB EFI system partition. I hope this helps someone else who may have this problem as well.

• VM does not start-"could not lock file".

  I would appreciate some advice on getting this problem - it seems that my computer was turned off suddenly during the night.  Attempts to start my VMware Workstation VM now lead "can't open the Flash xxxx.vmdk or one of the disks disk that it depends on.  Reason: cannot lock the file. »

  FWIW, I do not use any snapshots.

  Is there a workaround for the "impossible to lock the file?  Is it possible to get this virtual machine starts?

  TIA

  As the thought

  Delete the lck files and your VM should do it again.

  Tim

• I get this error at the start: could not find capable video game modules

  I need help. After the installation/upgrade to CC PP 2015, I get this error message at startup:

  capable video game modules is not found

  Do you have any suggestions?

  I did everything I can find on this subject.

  1 graphics card automatic switching in System Preferences/Energy Saver unchecked

  2. updated my NVIDIA CUDA software to the version of the driver 7.0.52

  3 trash my preferences Pro first

  All my other apps CC will launch and operate correctly.

  My presentation:

  MacBook Pro (retina, 15 inches, mi 2014)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB

  Graphics card: NVIDIA GeForce GT 750 M 2048 MB

  Hi Mary,

  Thanks for all the information. It indicates that something is inconsistent with your user preferences. Follow these steps:

  • First Pro CC, CC 2014 or 20141 freeze at startup or crashing everything working (Mac OS X 10.9 and later)
  • Run repair permission to drive on the boot under 'Disk Utility' drive and restart the computer

  Thank you

  Regalo

• «Cannot start service on local computer windows firewall.» Error 1068: the dependency service or group could start. »

  Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...

  I also tried sfc/scannow
  and here's SOME of my journal:
  http://pastebin.com/wKBJGDpV
  and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxas
  I also tried this:
  C:\Windows\System32 >netsh winsock reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  Unable to load the programme of assistance following DLL: IFMON. DLL.

  The following command was not found: winsock reset.

  I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.
  Please and thank you.

  Hi, Jahkr,

  Log shows that you had corrupted files and components.  System File Checker could not repair files try to repair the files first.

  See this document for corrupted files

  http://support.Microsoft.com/kb/929833

  To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:

  • Click Start, run and type Services.msc
  • Double-click the network connections entry
  • Set its Startup type to manual
  • Click Start to start the service
  • Double-click Windows Management Instrumentation
  • Set its startup type to Automatic
  • Click Start to start the service.

  After you start the services of two dependants, try to start the Windows Firewall service.

  http://www.Winhelponline.com/articles/145/1/error-1068-error-message-when-you-try-to-start-the-Windows-Firewall-service.html