Cannot start essbase app

Similar Questions

• Cannot start my app music after 10.0.0

  I think that my music app broke down, cause when I try to start it, it displays a blank page and goes back to the home page.

  Hello joyokafor,

  If you are unable to open the music app on your iPhone, the first thing that I would recommend would be to force close the app (by double-clicking the Home button and drag upward on the application of music), and then restart your iPhone.

  Force a nearby application on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201330

  Restart your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201559

  If the music app still does not open, make sure first that you have a backup of your iPhone in place.
  The backup of your iPhone, iPad and iPod touch
  https://support.Apple.com/en-us/HT203977

  We will then reinstall iOS (which should not affect your data or settings on the device) by following the steps below.

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart.
     • On an iPhone 7 or iPhone 7 more: press and hold the sleep/wake buttons and the Volume at the same time.
     • On an iPhone 6s and earlier, the iPad or the iPod touch: press and hold buttons sleep/wake and Home at the same time.
  3. Don't release when you see the Apple logo. Keep until you see the screen in recovery mode now.
     
  4. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.
     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  If your iPhone, iPad or iPod touch does not illuminate https://support.Apple.com/en-us/HT201412

  If you are still having trouble getting the application music to launch after following these steps, let know us and we can go from there!

  All my best!

• Cannot start vWS app, but can connect to broker on android/iPhone

  Hi guys,.

  Hoping you can tell me what I did wrong.  Here's a network diagram of how we put things in place:

  Here's how our box of the LATTER is configured:

  On a computer windows laptop (using port 443), I can log in fine, I get the Web page of vWS, I can connect, then I can see my apps and I can click the launch successfully.

  I can connect on my android or iPhone, fine (using port 47443), I can connect to the app of vWS, I can see my apps, but when I try and click on one to start, I get a "there are no available terminal server to connect at this time.  Please report this message to your administrator systom.  It's using the same user, so I know that the application is configured correctly because it works very well on a laptop.

  Any ideas what I did wrong?  In the android/iPhone app in the location settings I set it up like this:

  Selected HTTPS

  Dealer name / IP:

  TCP Port Broker: 47443

  NAT: checked

  RDP over SSL: checked

  The secure gateway name/IP:

  Secure TCP Gateway Port: 47443

  It's using vWorkspace v8.0 on 2008 R2

  Thank you!

  Hi Nick,

  The Port TCP Secure Gateway should be 443?

• Cannot start DPS App Builder

  Hi

  After a long time only working with DPS2015, I do some chores with DPS2014 SE.

  That's why I tried to start the DPS APP Builder. But I can't launch:

  * In Indesign with folio chosen, I can click on 'Create' App. then I see a gauge "App Builder is underway" but subsequently no app Builder.

  * Apple Spotlight or in Applications I find DPS App Builder. But clicking on it does not start the application.

  * I already downloaded the latest Version (32.4.5) from the Adobe website and installed.

  * I already removed the app and installed the new.

  * I rebooted my macbook.

  * I uninstalled App Buiolder DPS by moving it to the trash

  * I emptied the trash, too (and emptied the download folder, too)

  * I deleted the browser cache

  * I re-uploaded the DPS App Builder Image and installed again - no problems

  But I can't throw :-(

  Any other ideas?

  Thanks

  Hans

  PS: I also can not start previewer folio (tool that I did not really, because I test better with the Adobe Viewer on my iPad. But maybe the two things have the same reason.

  Yes, these are the two most recent versions. I do not know why you can no longer launch DPS App Builder. Have you entered in the Applications folder and tried by double clicking on the app? If so, I would like to delete it in the Applications folder, reinstall it, and then try again. If this does not work, contact technical support.

• Cannot start Essbase Server 11.1.2.1.0 deployment

  I just deployed and configured successfully Hyperion EPM Foundation services, planning and Essbase 11.1.2.1.0 on 1 computer with Windows 2008 R2 x 64. However I don't find Hyperion Essbase service in the Windows services window.
  
  Why the service was not created and how to create a service of Essbase in Windows?
  How can I run Essbase server manually? Beats which file I should start to do this?
  
  Thank you very much!

  Just to add, you should see a service like - http://4.bp.blogspot.com/__2AaArK5lW8/S9XELHQIjpI/AAAAAAAACQc/lYrFpiqKJIk/s1600/18.png
  You can also control the essbase using OPMN agent for example http://4.bp.blogspot.com/__2AaArK5lW8/S9XDu1xtpgI/AAAAAAAACPE/s4YWo2GlNHw/s1600/29.png

  And you can use the following commands
  opmnctl startproc ias-component = EssbaseInstanceName
  opmnctl restartproc ias-component = EssbaseInstanceName
  opmnctl stopproc ias-component = EssbaseInstanceName

  If you type opmnctl, then you should see all available commands

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 9380 blackBerry smartphones cannot start the App World after the operating system upgrade + card

  Hello

  my camera 9380 worked perfect when I bought it.

  Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work

  So I drove back and re-installed 7.0->

  (1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.

  (2) BB App World must be closed

  any help?

  THX

  Hello and welcome to the community!

  I'm sorry, but the errors you posted seem somewhat independent... so I need clarification please:

  Gbassi wrote:

  Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work

  Unfortunately, "did not work" is not really diagnosable. What, exactly, have you tried? What, exactly, happened every step of what you tried?

  Gbassi wrote:

  So I drove back and re-installed 7.0->

  (1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.

  (2) BB App World must be closed

  I do not see how these two errors are related to the first, you were trying to throw the maps app when it appeared? For the second, which came with the maps app? Or is separate #2 and lies somewhere in the process by using your AppWorld? Complete step by step of what you try, with a full explanation of what is happening at each stage, including the full text of all error messages, is essential to understand your situation and if all goes well to guide. Otherwise, we have to guess...

  So I guess. My guess is that, once you upgrade to 7.1, you don't have to perform a few extra steps to ensure that all services were properly enabled on your BB. Here are the steps. I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! You can try these few points in your process... either now (on 7.0.0.513) or after you re - try to upgrade to 7.1.0.366.

  Good luck!

• SW2 - host App and Smart Connect different certificates. Host application cannot start.

  I had my 2 SmartWatch today and installed app Connect Smart and SmartWatch 2 since google play, got the smartwatch of pairing with my bluetooth phone manual connect.

  But in the notification bar I get "the application host and Smart Connect different certificates. Host App cannot start. "and I can't go settings on Smart Connect to the SW2.

  Please help, now I can't use the no apps smartwatch becouse...

  It's very strange, these files works fine for me in an S3.

  Would it be possible for you to make a backup of your phone then reset (or reinstall the software using Kies if possible), and then try again (before restoring the backup)?

• Cannot start Service Essbase

  Hello
  
  I work under Hyperion 11.1.1 and I have error.
  
  I want to start Essbase service in order to use MAXL / Essmsh, but the Essbase service cannot start. The service starts manually as usual and path to the executable file on C:\Hyperion\products\Essbase\EssbaseServer\bin\ESSBASE.exe
  
  When I tried to find the folder and run essbase.exe the error indicates that the name of the service is bad (Hypservice_1) and not found.
  In fact the Windows service, the full name is ' Hyperion Essbase Services 11.1.1 - hypservice_1.
  
  Anyone has idea about this problem? Let me know, thanks.

  These messages are simply put in custody and are common, there must be other information recorded in the window on essbase start?
  It is also useful to check the logs in C:\Hyperion\logs\essbase\ essbase.log and SharedServices_Security_Client.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• appvolume Setup is complete but get error below when opening the web app-volume Manager interface. Cannot start the volume App Manager "cannot load this file - tiny_tds.

  "failed to start volume App Manager" boot failure Unable to load the file of this type - tiny_tds

  

  Hi Paul amstaur,.

  This question says, I've met before, and there is a permission problem. Please do below things to get rid of.

  Since you have already installed the app volume, go back to the snapshot, or install a vanilla OS. Provide a sufficient permission in the local security policy, if you install SQL express as well as the volume of the app as the backup Administrator, debug as an administrator, log in as a service to the domain user. Also make sure the time is correct on the computer. You must restart the computer after you gave permission.  Most of the cases you already have full filled what mentioned above, but still you get an error.  To get rid of it, you must copy the appvolume installation files to the local directory, may be in the C drive and recommending only not to mount the ISO in virtual CD ROM, instead of copy and extract the ISO locally.  the next important thing is that you must run the setup.exe AppVolume run as administrator.

• URGENT: Cannot start service Essbase

  Hi guru,.
  
  Essabase Services is not start-up. If I try to start it manually in services.msc, it start but as soon as I update it it stops. I replaced Essbase.bak by essbase.sec file and run essbase.exe from the command prompt. following error message is displayed "fatal error: index of the invalid element in the security file."
  
  I also copied the file of essbase.sec of my backup taken yesterday & essbase.exe leaders represented at the prompt but still getting the same error.
  
  I am able to connect to Shared Services & services OpenLDAP is also up & running. Please advice how to start services. It is urgent because it is in the production server.
  
  Thanks for your help

  Go to ground zero on this one - if (after performing a backup of each copy of Essbase.sec, Essbase.bak, Essbase.whateveritscalled) remove the Essbase security file (it is of course after stopping Esbsase), can it start up?

  I wonder if Essbase is dying because he can't somehow see Shared Services.

  Also, for laughs, started Essbase.exe in a window, not as a service. This will let you see what happens when it occurs. Yes, you can view the Essbase.log but it is more immediate.

  Kind regards

  Cameron Lackpour

  P.S. I will resonate Tim about it - if the works above, go back to your backup of Essbase.sec. You don't have a backup process that properly backup this file, right?

• Cannot start the Essbase Server

  Hi all
  
  Yesterday, I installed the OEPM 11.1.1.3 and was able to install and configure Essbase, Shared Services and planning.
  Even I accessed applications to sample (Sample-> basic). Today when I tried to access open console its raise an error.
  I stopped the essbase server service and tried to boot from the start menu. But the essbase server does not start. I checked the newspapers D:\Hyperion\logs\essbase and gives the following messages:
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051283)
  Recovery of license information, please wait...
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051286)
  The license retrieved information.
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Error (1051223)
  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: com.hyperion.css.CSSSystem < init >.]
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Info (1051198)
  Single Sign-On initialization failed!
  
  [Mon 23 Nov 17:37:30 2009] Local/ESSBASE0 / / / Info (1051232)
  
  Using English_UnitedStates.Latin1@Binary as the locale Essbase
  
  
  [Mon 23 Nov 17:37:31 2009] Local/ESSBASE0 / / / Error (1051527)
  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.
  
  
  And also there is a file by name "SharedServices_Security_Client.log", where the content of it is as below.
  
  "2009-11-23 17:37:11, 687 INFO [hand] CSS is initialized as a customer. Properties default logger will be responsible com.hyperion.css.CSSSystem. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS log file will be generated in the com.hyperion.css.CSSSystem D:\Hyperion\logs\essbase\SharedServices_Security_Client.log. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] set up CSS with registry com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS to initialize the registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration (unknown Source)
  2009-11-23 17:37:11, 859 INFO [hand], trying to get registry Instance com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [main] 20:1092: failed to initialize the EPM system registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: error [Hyperion] [Oracle JDBC Driver] establishing socket to host and port: ibm:1521.] [Reason: Connection refused: connect] com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [hand] Arguments: param1 = {}, param2 = null, param3 = D:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:24, 515 INFO [main] CSS system initialization has failed. : [ms 13047] com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  
  
  Please advice how to solve this problem.

  Hello

  He has problems communicating with your Oracle database where shared Services of / registry is located.
  Connection refused from ibm:1521
  This could be up to oracle not in place and running, a network problem, a firewall problem.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error 244: The DataFinder cannot start due to an internal error.

  I have LabVIEW 2010 and, during Windows startup, this error message appears:

  "The DataFinder cannot start due to an internal error.

  (244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

  I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

  Hi xcontradictorx,

  Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

  If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

  If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

  Try the following:

  (1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  (2) remove the entry DataFinder
  (3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
  (4) restart

  This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

  One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

• Another type of "this device cannot start. (Code 10) "failure

  Environment:

  EM250 Netbook (basically an Acer)

  Windows 7 Starter

  Sansa Clip + 4 GB

  Version V01.02.15A

  Basically, is that the device will not work in MTP mode.  Works very well in MSC, but PSG is necessary because the unit was purchased specifically for use with audible.com audiobooks, and it does not have MSC mode.

  Got the "this device cannot start. (Code 10) "goodbye, looking for inproperties after the driver will not load.  Two "insertion events" beeps during the process

  Tried the "'Net local service localgroup administrators / add" to http://kb.sandisk.com/app/answers/detail/a_id/192 "

  The command was successful, but has not fixed the problem.

  Tried updating all the drivers I could find.  A ran the sansa updater to make sure everything was up to date.

  The device can't the same way on an Acer netbook and similarly on a Windows XP desktop.

  I look at the installation in the control panel Device Manager, you can see the low level driver loading and the portable device become active, but then the level user MTP driver fails.

  from the event viewer, I see the following events associated with inserting

  Event ID 24576 information: "Drivers have been correctly installed for device USB\VID_0781 & PID_74D0 & REV_: 8<>

  25089 Information event ID: 'it was not possible to access the device () after installing the drivers. Error code 0 x 80070651. »

  Event ID 10110 critical: "there was a problem with one or several drivers from user mode and the hosting process is finished.  This can temporarily interrupt your ability to access devices. »

  Event ID 10111 critical: "the device USB MTP Device (location Port_ #0003.Hub_ #0005) is offline due to a user-mode driver accident."  Windows will attempt to restart the Unit 5 times more.  Contact the device manufacturer for more information on this problem. »

  I suspect the key error is the "error code 0 x 80070651.", but I have not found a solution for her online that works

  I tried the technique of driver to uninstall without success.  After the step to "Discover new material" he would miss just the same way.

  I just found a way that worked well.  I have re-installed the firmware.  Not through the Sansa Updater.  This program would simply note that my Clip + release the latest version, then give up.

  Instead I manually re-installed the firmware using the process that the people of Mac and Linux have to use. detailed on the

  http://forums.SanDisk.com/T5/clip-Clip/Sansa-clip-firmware-update-01-02-15/TD-p/150227

  In short, it is to download the zip to show off to

  http://mp3support.SanDisk.com/firmware/ClipPlus/clipplus01.02.15.zip

  Unizip it, then move the two files to the root of the Clip + while it is mounted in MSC mode.

  When he unplugged the updates the firmware.

  I don't know if it was a step necessary or not, but I also reformatted the Clip + menu.  In any case, it now amounts to PSG. mode.

• Error message "WLXPhotoLibraryMain.dll cannot start. "Error code: 0x800736b1" in Windows Live Photo Gallery

  Windows Live Photo Gallery does not load.  Receive the message "WLXPhotoLibraryMain.dll cannot start.  "Error code: 0x800736b1" what should I do?

  Hello

  Fix Windows Live photos from Add/Remove programs or programs and features.  If this does not work, please proceed to uninstalling the app.  It was formerly no Ospreys wing, please proceed with the download and reinstall the application.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.