URGENT: Cannot start service Essbase

Similar Questions

• Cannot start Service Essbase

  Hello
  
  I work under Hyperion 11.1.1 and I have error.
  
  I want to start Essbase service in order to use MAXL / Essmsh, but the Essbase service cannot start. The service starts manually as usual and path to the executable file on C:\Hyperion\products\Essbase\EssbaseServer\bin\ESSBASE.exe
  
  When I tried to find the folder and run essbase.exe the error indicates that the name of the service is bad (Hypservice_1) and not found.
  In fact the Windows service, the full name is ' Hyperion Essbase Services 11.1.1 - hypservice_1.
  
  Anyone has idea about this problem? Let me know, thanks.

  These messages are simply put in custody and are common, there must be other information recorded in the window on essbase start?
  It is also useful to check the logs in C:\Hyperion\logs\essbase\ essbase.log and SharedServices_Security_Client.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot start (Service event log)

  While planning to try a task sheduler task, I have been informed a necessary service work not (event log). On trying to start the necessary service (event log), I received the following error message. {Cannot start service on Local, specific error 126 computer event log module cannot be found.} I was online looking for a solution without success, would appreciate any assistance to resolve this problem.

  It's me, George. I solved my problem with a little help from Microsoft.  The solution is simple for those of you with the same problem.  Rather than search the web and the Microsoft Web site, I simply clicked on my "Help and Support" icon on my desktop and entered in the same query.  This time, I got a response that actually question my problem even though she warned that she could apply to XP.  It was for Windows 2000, but I tried anyway and it worked.  The cause of the problem is a DLL missing from the Windows\system32 directory, a file named "eventlog.dll.  It is still on your computer in a different directory, so all you have to do is a search under the road you have installed Windows on this file and copy it to the Windows\system32 directory and everything should be fine.  It's as simple as that.

  I hope this helps all who can be soon _ trying to correct what I tried to correct for the past three days.  Good luck and may the force be with you.

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• Error "Cannot start service bluetooth stack" whenever I restart my computer.

  Original title: I have Windows 7 and have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  I have Windows 7 and you have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  Hello

  You did it all changes before the show?

  Method 1: Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.

  Method 2: Put the computer to boot and see if that helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• MY mail server hardisk full so cannot start services & also unable to access the mail server

  I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Cannot start "Hyperion Essbase Services 11.1.1 - hypservice_1.

  I can't add new servers to Essbase in the Services Administration Console: I type the name, user and password, but when I click OK the program hangs and I have to stop it by the Task Manager.
  
  I tried posting and is everything is OK, green color in the web page generated.
  I checked in Windows services and found that "Hyperion Essbase Services 11.1.1 - hypservice_1" are not started, but when I click and start the following error message appears:
  
  Not able to start the Hyperion Essbase Services 11.1.1 - hypservice_1 service on the Local computer.
  Error 1067: The program ended unexpectedly.
  
  It might be one of the reason for my problem?
  
  I had to modify the port number agent of Essbase 1423 to another, because it was already in use during the installation, and I inserted 1984.
  
  Could you tell me why?

  Hello

  Officially, it supports (server component) only Win 2000 /Win 2003 server with SPs.
  While you can use other OS (like Win Xp) for customers running.

  Thank you
  Focusthread Hyperion trainer
  [http://focusthread.com/training]

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Windows 7 - "cannot start service Windows Security Center" aka WSCSVC. Error 1075

  Set indicator important message...

  "The Windows Security Center service cannot be started.

  This happened after I was deleting my WINDOWS 7 malware/virus. I open "SERVICES" went to the CENTER of the SECURITY in respect of services and a click with the right button on the name WSCSVC or attempt to start the service, following the verbosed of error/warning:

  "Windows failed to start the service on Local Computer Security Center.

  "Error 1075: the dependency service does not exist or has been marked for deletion.

  I think this may have had parts removed by Hijack, Anti-Malware, TDSSkiller, gmer, Housecall or ComboFix when I get rid of my system from Malware/Trojan/virus. With the exception of the Security Center, my system is now working well.

  The WSCSVC registry may have been deleted and the residue in the capture instant/backup/restore points. I know This is a very important function to have running, as it monitors your safe; Firewall, antivirus, UAC, Anti-Spyware and updates, etc.

  How to restore this program back to its normal state of operation, even if there are no backup? IE (manually enter the information in the registry?

  I'll be somewhere pointed to download the replacement program? Perhaps out of the installation DVD WIN7?

  Are there other ways as an option to solve this problem? Perhaps, another Member of program state and remove the remains of Security Center?

  Thanx

  In any case, this might do the trick: http://www.winhelponline.com/blog/error-1075-when-starting-the-security-center-service/

  Note: I know it's for Windows XP, but the same steps will apply to a Windows 7 computer running.

  Itknowledge24.com

• Cannot start the Essbase Server

  Hi all
  
  Yesterday, I installed the OEPM 11.1.1.3 and was able to install and configure Essbase, Shared Services and planning.
  Even I accessed applications to sample (Sample-> basic). Today when I tried to access open console its raise an error.
  I stopped the essbase server service and tried to boot from the start menu. But the essbase server does not start. I checked the newspapers D:\Hyperion\logs\essbase and gives the following messages:
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051283)
  Recovery of license information, please wait...
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051286)
  The license retrieved information.
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Error (1051223)
  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: com.hyperion.css.CSSSystem < init >.]
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Info (1051198)
  Single Sign-On initialization failed!
  
  [Mon 23 Nov 17:37:30 2009] Local/ESSBASE0 / / / Info (1051232)
  
  Using English_UnitedStates.Latin1@Binary as the locale Essbase
  
  
  [Mon 23 Nov 17:37:31 2009] Local/ESSBASE0 / / / Error (1051527)
  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.
  
  
  And also there is a file by name "SharedServices_Security_Client.log", where the content of it is as below.
  
  "2009-11-23 17:37:11, 687 INFO [hand] CSS is initialized as a customer. Properties default logger will be responsible com.hyperion.css.CSSSystem. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS log file will be generated in the com.hyperion.css.CSSSystem D:\Hyperion\logs\essbase\SharedServices_Security_Client.log. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] set up CSS with registry com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS to initialize the registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration (unknown Source)
  2009-11-23 17:37:11, 859 INFO [hand], trying to get registry Instance com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [main] 20:1092: failed to initialize the EPM system registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: error [Hyperion] [Oracle JDBC Driver] establishing socket to host and port: ibm:1521.] [Reason: Connection refused: connect] com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [hand] Arguments: param1 = {}, param2 = null, param3 = D:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:24, 515 INFO [main] CSS system initialization has failed. : [ms 13047] com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  
  
  Please advice how to solve this problem.

  Hello

  He has problems communicating with your Oracle database where shared Services of / registry is located.
  Connection refused from ibm:1521
  This could be up to oracle not in place and running, a network problem, a firewall problem.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite A100-599: cannot start service Toshiba Power Saver

  I have A100-599 with Vista pre-installed. As you know there is that Toshiba Power Saver comes with mobile vista power settings. Not always, but sometimes when I turn on the computer and start windows I get this message "service Toshiba Power Saver could not start.

  When I checked in Control Panel-> system-> Services if the service indeed off I saw he did start and run.

  Can someone tell me why this message sometimes? It is a software issue or maybe there is a problem with the hardware?

  Hello

  Maybe I m wrong but as I know Toshiba has not designed for Vista operating system energy saver!
  Vista uses a power options clean that looks like a little bit like the Toshiba power saver, but not energy from Toshiba!

  All laptop computers that are shipped with Vista have any preinstalled Toshiba eve!

• Cannot start Service Security Center

  When I try to start the Security Center, a Message appears saying Security Center service will not start and when I try to start the windows Defender window opens

  error 0 x 80070424 and upward with.

  Try the RESOLUTION in this article also read whole article!

  http://support.Microsoft.com/kb/2519899

• «Cannot start service on local computer windows firewall.» Error 1068: the dependency service or group could start. »

  Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...

  I also tried sfc/scannow
  and here's SOME of my journal:
  http://pastebin.com/wKBJGDpV
  and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxas
  I also tried this:
  C:\Windows\System32 >netsh winsock reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  Unable to load the programme of assistance following DLL: IFMON. DLL.

  The following command was not found: winsock reset.

  I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.
  Please and thank you.

  Hi, Jahkr,

  Log shows that you had corrupted files and components.  System File Checker could not repair files try to repair the files first.

  See this document for corrupted files

  http://support.Microsoft.com/kb/929833

  To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:

  • Click Start, run and type Services.msc
  • Double-click the network connections entry
  • Set its Startup type to manual
  • Click Start to start the service
  • Double-click Windows Management Instrumentation
  • Set its startup type to Automatic
  • Click Start to start the service.

  After you start the services of two dependants, try to start the Windows Firewall service.

  http://www.Winhelponline.com/articles/145/1/error-1068-error-message-when-you-try-to-start-the-Windows-Firewall-service.html