cannot start.hardware unit-(Code 19)

Similar Questions

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.

• Error message "WLXPhotoLibraryMain.dll cannot start. "Error code: 0x800736b1" in Windows Live Photo Gallery

  Windows Live Photo Gallery does not load.  Receive the message "WLXPhotoLibraryMain.dll cannot start.  "Error code: 0x800736b1" what should I do?

  Hello

  Fix Windows Live photos from Add/Remove programs or programs and features.  If this does not work, please proceed to uninstalling the app.  It was formerly no Ospreys wing, please proceed with the download and reinstall the application.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  original title: error code 0 x 80070015

  I have recently installed Windows Live Essentials 2011, and since then, I have been unable to open the .jpg files in Windows Live Photo Gallery.

  I get the following message:

  Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  Any help would be appreciated.

  see you soon

  Dan

  Download and install this

  http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  If this post answers your question, click mark as answer .

• Cannot start hardware

  Hello.

  Recently I tried to synchronize an e200 V1 to my PC via USB, and as soon as I plugged in the USB, I got a popup window asking to install the equipment. I have completed the installation, but ended up getting a message saying "there was a problem installing this hardware: MTP device.» This device cannot start. (Code 10) "at the same time, the screen on the e200 simply shows 'connection '.

  Is someone can you please tell me what the problem might be (firmware/hardware related)?

  You have a glitch in the matrix. Sometimes the Sansas do not connect.
  Try disconnecting, it does again.

  If this fails, here are some other ideas: http://forums.sandisk.com/sansa/board/message?board.id=e200&thread.id=25897

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)

• This device cannot start. 6to4 (code 10) card transfer cable & easy usb

  Device Manager displays problems with these 2 items.  (Code 10) driver is up to date. Shows 2 usb cables. Am clueless about this stuff. Any & all help is greatly appreciated

  Thank you clueless in Idaho

  Hello

  For the 6to4 adapter.

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message.
  http://support.Microsoft.com/kb/932520

  =========================

  For any other driver problem: (more precise descriptions of the devices might help)

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  My DVD RW drive, Optiarc AD7530B has stopped working. I get this error message in Device Manager:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Verification of the solution does not anywhere - thanks Microsoft!

  Anyone know if there is a resolution to this?  The car was working fine so it must be one of these "Windows Updates" which does its magic.

  Hello

  Check these for the good info on CD/DVD - maybe someone with the same unit can give you all the
  correct the registry settings to try. And the drive could be bad.

  CD/DVD units
  http://www.myce.com/storage/

  Forums - a lot of expert real help
  http://Club.myce.com/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD is not accessible? Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  The DVD (matshita dvd r) no longer under folders on the computer.

  Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  When I try to update the driver it says I already have the best driver.

  http://www.pchell.com/hardware/cd_drive_error_code_19.shtml

  In fact, it worked for me.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Having too much CD/DVD programs can cause strange problems, especially if they load of parties
  themselves at the start because they will be competing for resources. This does not mean this problem
  has been caused by those, however, it is a possibility that and how much you
  have installed. Uninstall those that, like iTunes, Nero, and others who might be the cause of
  see if that helps.

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  If the player comes with your computer to check with the manufacturer of support system. If it isn't check
  with the support of the creation of DVD.

  =====================================================

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  ===================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD/DVGW SN - S082D question - Windows cannot start this hardware device Code 19

  I've had my laptop for a little over a year now and it's had its fair share of problems, which most is repairable or there is a solution.
  Earlier today, I inserted a disc in the drive and tried it opens, went into "My Computer" and find the disk was not displayed.

  It's happened a couple times and a simple reboot fixes the problem.
  I rebooted twice and this time, that the problem was not fixed, after going in 'Device Manager', I found there was a problem with the device and he gave me the following error message

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  As usual "search for the solutions" is useless and doesn't return any results.
  Thanks in advance for any response.

  Some info that may help
  OS: Windows Vista editions Home Premium
  Laptop model / number: Medion MD 98300
  DVD drive: TSSTCorp CD/DVD W SN-S082D ATA Device

  Thank you

  First of all, I wonder why you post this here in the Toshiba forum if you don t have a Toshiba laptop
  It's a little strange for me... anyway I'll try to help you.

  It seems that the registry keys are corrupt and so your CD/DVD drive does not work properly.

  Just try the proposed solution mentioned here in the doc of Microsoft:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• DVD/CD Rom error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title: CD-ROM/DVD-Rom problems

  My CD-ROM/DVD-Rom drive does not work when I check the system, I get the following message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "How to solve this problem?  Thank you in advance.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!