Cannot start OBIEE 11 g - Server BI and BI Presentation Services

Similar Questions

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• Confused about BI Publisher and BI Presentation Services

  Hello
  
  I have read this document: http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/toc.htm
  
  I have already created a user, role, and data sources, to integration with the presentation Services. Now, what is the relationship between the BI Publisher with services presentation BI? So far, I could only connect to the presentation of the Services as administrator. I tried to use "user" I created on BI Publisher to log on as a normal user presentation Services, but it is said that it is not valid. How can I set up a normal user for presentation Services create the report? (if that's the goal of it). What is the diff of the user on presentation of BI and BI Publisher Services? I'm still confused and so far I can not create a report on the responses =) would a person also refer to a document on a setup step by step if I could create a report?
  
  
  Thank you!

  If you use BI_SERVER security, your BEEPER users will be authenticated against the installation of server of BI (RPD), which in itself is a table of data types, LDAP, authentication 4 IE select in the table where

  If you go in Server BI, take care to ensure that your users are in the appropriate groups of the XMLP_XXXX. -See documentation for exact priv given to each group.

  If you use the security of the OPE, you users BEEP etc..

  Offline / online:

  Is offline when usually build you the repository 1st time when ready (overall consistency checks that is spent in the administration tool), you will put the RPD in the folder /Server/repository. Point the NQSConfig.INI to the RPD file and start the BI Server service. OBIEE takes RPD file, load into memory ready for use with BI presentation services. When you connect 'Online', you connect to the RPD in memory (and 'Live' in the service) when you make changes, they are immediately in effect (changes to presentation catalogs usually require a pressure on the "Reload server metadata" responses)
  * When BI services are on the rise, the RPD specified in NQSConfig is locked for editing, if you try and open with the administration tool you will get only the playback mode.

  What repository?
  It's simple: when you connect online, you specify an ODBC connection that you have need to configure in data sources - ODBC type "Oracle BI Server", here you give the IP address / hostname of the BI server and what RPD you want to use, just specify the RPD in the ODBC connection IF you have several RPDS specified in the NQSConfig.INI , otherwise the 'failure' RPD will be selected.

  Does that help? -Maybe that start a new thread for questions, this mark as being closed to help other users of the research.
  See you soon
  Alastair

• Cannot start Coldfusion 9 Application Server Service

  Note that this is a Dev server.  Not vital, but super boring.  I found that my machine has been restarted due to Lumension.  It's normal.  However, given that I imported a file .because the old CF8 server directly to this Dev CF9 Server I had not restarted or restared the CF9 service.

  I found these error messages in the event viewer:

  The ColdFusion 9 application server service could not be started.  Check the log files from the server 'coldfusion' for more information.

  and

  The ColdFusion 9 application server service stopped with the error special service that the system cannot find the specified file...

  I checked the JRUN logs and can not find all the papers relating to correspondence timestamp of today or anything out of place, which seems to be the cause.  Nothing in the CF be newspapers, mainly because CF never rose from the status running if no newspaper could be generated.

  I thought I found the culprit in this post http://www.houseoffusion.com/groups/cf-talk/thread.cfm/ThreadId:61223 ... but the fix is without effect.  I can't find anything in my search using grep outside the JRUN temp folder a single .xml file with a path of Coldfusion8 not valid.  The path of attachment or remove the offending temporary files does not solve the problem.

  I also tried to move all files from the root that was moved in the directory / / ColdFusion9/wwwwroot/out and you try to start the service, but the same error and failure occurs.

  I have not tried to reinstall.  I installed the CF9.0.1 update and it work just dandy wait this restart.  There are no other experienced computer problems that I can tell, and no other errors were found in the event viewer.

  Thank you!  I now have an error that I can hunt and diagnose if all goes well.

  "Error: no known VMs."  (Check for corrupted jvm.cfg file) "has been exposed error.

  With a little big of the Goog I'm done with a solution of another CF user experience the same joy: http://forums.adobe.com/thread/795168

  Found the problem because I suspected an incorrect path.  It's the java.home variable that was incorrect.  Java.Home =: / ColdFusion9/execution/jre, I changed to java.home=C:/ColdFusion9/runtime/jre and he has pulled up very well.  Solved!

• Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.

  Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.

  I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.

• Error messages: the program cannot start because LTID1ON.dll is missing and could not be loaded ESAPP.dll download Kodak

  Original title: error

  Download Kodak and received the error message "" unable to start the program because it lacks LTID1ON.dll form your computer ""

  What is - this and how to fix it?

  Also now got "one or more system DLL cannot be loaded:ESAPP.dll.

  Hi Nathalie criss.

  1. what browser do you use?

  You can try to temporarily disable antivirus software (and any other security such as anti-malware software, etc.) and firewall on the computer and try redownloading software.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, you can check the link foolwing:

  How to solve error codes from EASYSHARE resulting from Internet downloads software?

  http://support.en.kodak.com/app/answers/detail/A_ID/3569/selected/true

  Hope this information is useful.

• Cannot start the editor of the network and receive a "Virtual ethernet = failed' message when recompiling"

  Hello

  I'll have this error weird - I never had when running VMWare on Windows XP - Linux 6.5 VMWare on Kubuntu 9.04 who cannot open the network Editor, just after I type my user password in the gksudo crushing of the network Editor window and refuse to start. I have this question in a new installation of Kubuntu 9.04 with all the patches with kernel 2.6.28 - 15-generic.

  Any help welcome

  Try from workstation from the command line using the following syntax to see if you still have questions

  VMWARE_USE_SHIPPED_GTK = force vmware

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• He cannot start Oracle Database after server restart.

  construction of an oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0

  and 11 GR 2 as database of New York City.

  Once I completed the installation and configuration, I install the client EAS essbase, once completed I have too reboot the server

  Once the server is back, the database gives me the following error:

  Database Instance: Hyperion

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 2:19:45 CEST

  Database instance

  Host localhost

  Port 1521

  Hyperion SID

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Earphone

  Down status

  Host localhost

  Port 1521

  Name LISTENER

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin

  TNS-12541 details: Listener TNS:no

  Connection to the Instance of the agent

  State has failed

  ORA-12541 details: TNS:no listener (DBD ERROR: OCIServerAttach)

  Change the details of the State

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > SQL > ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_HYPERION."

  Disconnected

  Database Instance: Hyperion

  Error message

  The startup of the database operation failed. Click on "View details" to see the error. You may need to perform a restore.

  See the details

  Perform a recovery

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 12:56:37 CEST

  Please notify

  %ORACLE_HOME%=C:\app\Administrator\product\11.2.0\dbhome_1 this looks OK

  but I did a search for TNSlistener. ORA file and it wasn't there?

  I missed an aseo when configuring the database

  Please notify

• Cannot start vm converted from Server 2 to the ESXi4

  Hello

  I have a problem with the converted vm boot from Server 2 straight to ESXi 4. Used the last Converter 4.0.1 - 1.

  previous 4.0 was not able to create the ide controller.

  After the boot, black screen with the cursor is displayed. No travel

  Details:

  ESXi 4 Installation on hp enterpise desktop dc7900 (core 2 duo, sata drive)

  Edit the disc (VM on the server 2):

  Adapter: IDE 0 device: 0 (disc 1)

  Edit the disc (the VM even converted on ESX 4i):

  IDE (0:0) hard drive 1

  Tell the truth, I don't know why the drive on the virtual machine source is IDE... But it's important VM and I would like to make it work on ESXi 4.

  Please help to make it work.

  THX.

  Michael.

  By default the virtual machine in VMware Server have a virtual IDE drive.

  But on ESX (i) is better to use a virtual drive SCSI (the only supported up to vSphere).

  You can try to maintain the same controller, but you can also change and converter will reconfigure your OS (if supported) to match the new controller.

  André

• Cannot start the weblogic managed server soa_server1

  Hello
  I installed 1og SOA on weblogic server 10.3.4 WLS and SOA 11g Release 1 Patch Set 3 on the centos 5.5.
  Because I have to learn the BPM.
  I configured soa10g_server1 and Server Admin
  When I run "startManagedWebLogic.sh soa_server1", I got the authentication rejected the exception thrown. I know that the password must be correct.
  I have check the hosts file
  127.0.0.1 localhost.localdomain localhost
  
  What else could be causing the problem?
  
  I'm so frustrated to configure the weblogic with the SOA 11.3.4

  Yes, as in my second point.

• AMD network adapter cannot start

  Hello world

  I just install Windows 2003 Server on my virtual machine. I can't connect to the Internet while troubleshooting using ipconfig at the command prompt, it generates no ip address. I checked my card NIC cannot start Device Manager. I uninstalled and reinstalled and also haven't tried upgrading the driver no results. Any help how to solve this problem?

  Thank you

  Have you installed VMware Tools?  This will add the virtual NIC - VMXNET driver. The NCI AMD is the default NIC identified by plug-and-play os when vmware tools is not installed-

• Cannot start my MacBook Pro after the intrusions on the apple Web site to stop pop up ads. S

  Cannot start for hours

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  It may be helpful if you indicated the EXACT MBP model/year you have.

  Ciao.

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Flash player updates not error cannot start because sliprt.dll is missing

  will not be updated to flash player. error, says program cannot start because sliprt.dll is missing. and yes my win7 w / MSSE is updated and clean. someone at - it solved this problem? just started w / flash was last updated. Thank you, tom

  sliprt.dll is not a MS file, it can be provided with a download accellorator program.

  Flash Player is not a program of MS, but is supported on the adobe flash player site