cannot unpack a file,

Similar Questions

• Cannot unpack the files... going crazy

  Since I bought my computer desk Dell in July of this year it will not open anything zipped.  When I double click, she acts like she opens somehting 15000 times.  The screen flashes and you cannot stop it without having to restart the computer.  Dell said it's a file windows corrupt... but where I got from there?

  Thank you very much!
  Melissa

  Since I bought my computer desk Dell in July of this year it will not open anything zipped.  When I double click, she acts like she opens somehting 15000 times.  The screen flashes and you cannot stop it without having to restart the computer.  Dell said it's a file windows corrupt... but where I got from there?

  Thank you very much!
  Melissa

  The link for the zip 7 program: it is used to extract the zipped files.
  http://www.7-zip.org/

  Note: there is one for 32-bit and one for 64 - bit. Make sure you choose one that suits.

  t-4-2

• Cannot unpack the files

  I have a friend who has stopped computer to open the zip files. Him and me like to play farming simulator 2015 and then, naturally, we wanted to start getting mods for our games. But he did something to his computer to stop opening zip files. For a while, we want just trancefur the zip files on an external hard drive and go to his laptop computer, and then open them here. But it becomes just annoying. So I was wondering if anyone knew what we should do. It appears an error message and that's it.  I tried to go to 'open with' and to use Internet explorer, but now the computers to lag and 7 different opening pages and say does not when I close out of them.

  Any help would be greatly appreciated.

  ZIP files are not opened by Internet Explorer, so we need to fix, to associate with the appropriate Manager.  Click on this link and 'run' to import the default settings of the ZIP file in your registry:

  File repair ZIP File Association: http://www.sevenforums.com/attachments/tutorials/185979d1322578124-default-file-type-associations-restore-default_zip.reg

• I don't have the option to unpack the files or folders.

  I don't have the option to unpack the files or folders. I can zip files very well by using send to > folder compressed... no problem. It gives the file compressed Photoshop icon for some reason any. I tried to change the association, but not luck.   I don't have WinZip or anything as it is installed. Help!

  original title: cannot unzip in Vista

  Looks like the registry entries for the files ZIP is confused. These must be the default values:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.zip]
  "PerceivedType"="compressed".
  "Content Type"="application/x-zip-compressed.
  @= "CompressedFolder".

  [HKEY_CLASSES_ROOT\.zip\CompressedFolder]

  [HKEY_CLASSES_ROOT\.zip\CompressedFolder\ShellNew]
  "Data" = hex: 50, 4B, 05, 06, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
  "ItemName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00,------.
  6F, 00, 74, 00, 25, 00, 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C,
  00, 7A, 00, 69, 00, 70, 00, 66, 00, 6 c, 00, 00, 64, 72, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 2 c, 00,------.
  2D, 00, 31, 00, 30, 00, 31, 00, 39, 00, 34, 00, 00, 00

  [HKEY_CLASSES_ROOT\.zip\OpenWithProgids]
  "CompressedFolder"=""

  [HKEY_CLASSES_ROOT\.zip\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\CompressedFolder]
  @= "Compressed (zipped) folder."
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 7, 00, 00, 69, 00, 70, 00, 66, 00, 6 c, 00, 00, 64, 72, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 39, 00, 35, 00, 00, 00

  [HKEY_CLASSES_ROOT\CompressedFolder\CLSID]
  @= "{E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}".

  [HKEY_CLASSES_ROOT\CompressedFolder\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00, 32, 00, 5 c, 00, 7A, 00, 69, 00,------.
  70,00,66,00, 6 c, 00, 64, 00, 72, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [HKEY_CLASSES_ROOT\CompressedFolder\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\find]
  "SuppressionPolicy" = dword:00000080
  "LegacyDisable"=""

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\Open]

  [HKEY_CLASSES_ROOT\CompressedFolder\shell\Open\Command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,20,00, 2f, 00, 69, 00, 64, 00, 6 c, 00, 69, 00, 73, 00, 74, 00, 2 c, 00, 25, 00, 49, 00, 2 c,.
  00,25,00, 4 C, 00, 00, 00
  "DelegateExecute" = "{11dbb47c-a525-400b-9e80-a54615a090c0}".

  [HKEY_CLASSES_ROOT\CompressedFolder\ShellEx]

  [HKEY_CLASSES_ROOT\CompressedFolder\ShellEx\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\CompressedFolder\ShellEx\ContextMenuHandlers\ {b8cdcb65-b1bf-4b42-9428-1dfdb7ee92af}]
  @= "Compressed (zipped) folder Menu.

  [HKEY_CLASSES_ROOT\CompressedFolder\ShellEx\DropHandler]
  @= "{ed9d80b9-d157-457b-9192-0e7280313bf0}".

  [HKEY_CLASSES_ROOT\CompressedFolder\ShellEx\StorageHandler]
  @= "{E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}".

  [HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]
  @= "CompressedFolder".

  [\DefaultIcon HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00, 32, 00, 5 c, 00, 7A, 00, 69, 00,------.
  70,00,66,00, 6 c, 00, 64, 00, 72, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [\Implemented HKEY_CLASSES_ROOT\CLSID\ categories {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]

  [HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31} \Implemented Categories\ {00021490-0000-0000-C000-000000000046}]
  @= hex (0):

  [HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31} \InProcServer32]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00, 32, 00, 5 c, 00, 7A, 00, 69, 00,------.
  70,00,66,00, 6 c, 00, 64, 00, 72, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00
  "ThreadingModel"="Apartment".

  [\ProgID HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]
  @= "CompressedFolder".

  [HKEY_CLASSES_ROOT\CLSID\ {E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31} \ShellFolder]
  'Attributes' = dword:200001 has 0
  "UseDropHandler"=""

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Windows Media Player cannot play audio files

  Hi, I have Toshiba laptop, this is my baby, and all of a sudden I can't play sounds! When I click to play a song in windows media player, it says:

  Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  I tried everything and I'm on my last nerve! Basically, I'm rubbish with computers, I do not understand this at all, I followed all the ways suggested by the section 'aid' in my computer and I can't always listen to 'The Feeling!' Please help, I'm going crazy here!

  Yes my friend. The computer world is really not easy to understand, and sometimes I wish that I could no longer live the island of computer.
  but you know, the development never stop.

  OK, now your problem; have you checked the Device Manager?
  You don't see any yellow exclamation next to the sound card?

  I think that you should first try reinstalling the audio driver. Of course, it s a very tips but especially it works essentially ;)

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• PAINT cannot open .odt files

  I created a list of games won in a certain category for pleasure and saved it on my USB flash drive and several times have opened to make sure that I am not a game I already won.

  Today, it is not open.  He reads THAT PAINT cannot read odt. files.  I have Open Office.  Now, yesterday I did something to the Open Office draw and tried to save it to the images in my library.  He saved very well and was open, but it was closed for all other programs and applications.  Paint, fresh paint and of course sky drive, but in the State closed so that no photo program effects could open no more.  I understand all that, so I deleted the drawing.  I mention this as an example of my use of odt files and an attempt to open something.   It didn't involve my flash drive.

  I have two other flash drives, I tried to open it and he opened them all except odt. files.  I will reiterate, all 3 have worked very well.

  Why, when I opened them tells it that PAINT is unable to open these files, when you're leading Explorer, I open my flash drive in?

  Moved from feedback

  Original title: can't open the Flash drive

  You will find support for Open Office (which is not a Microsoft application) here: www.openoffice.org/support

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.