Cannot update Win 7 after his conversion to a SSD drive

Similar Questions

• Cannot update Windows 7 after installation

  Can anyone help?

  I have a problem with my installation of windows 7. It freezes after every start. I was not able to do a windows update. It's good to start, but it does not update.

  I downloaded some updates. Question: where can I put the files so that they can install on startup?

  I suspect that the problem is nvidea Geforce 7600 GT. I have the latest version of the driver. How can I disable acceleration 3D (from start) /

  I found some memory conflict messages in the display driver. Could be the problem?

  Any help is appreciated.

  Russ

  Hello
   
  To answer your questions:
   
  1. where can I put the files so that they can install on startup?
  You should not put all the files in the startup as this problem may occur if there is a problem with updates to install.
   
  2. How can I disable acceleration 3D (from start)?
  Tell us why you need to disable 3D acceleration?
  3. What is the problem you are having with the display drivers?
  4. What is the exact error message?
   
  In the meantime you can follow these methods below and check if the method solves the problem.
  Method 1:
   
  Check the history windows update to find the error code for updates failed. Make a right-click on the update failed, and then click view
  To do this:
  a. click on start ORB
  b. type of line Windows Update search
  c. click on Windows Update
  d. Select view update history
   
  Method 2:
   
  You can run run the Windows Update Troubleshooter and check if the problem.
   
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot update win 8 language unique to 8.1

  Why can't update to win 8.1 of the store, I have best windows licensed.

  Hi Bobo,

  Thanks for posting in the Microsoft Community.

  (1) what is the exact error, he sees when you try to upgrade to Windows 8.1?

  You can view the Microsoft Help article for more information and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• Cannot start Windows 7 after the conversion of the physical machine

  Hello

  I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):

  Unable to find the system volume, reconfiguration is not possible.

  Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.

  Any help to guide me to this point is very popular figure.

  Thank you

  Andrey

  Disk2vhd create a vhd file
  Starwinds V2V converter converts the virtual hard disk into a vmdk
  This vmdk is assigned to a new virtual machine
  first boot the virtual machine goes into a Windows 7 drivers restore CD you patch

  my notes:http://sanbarrow.com/p2v2008r2.html

• Where can I find my Word file converted after his conversion?

  How can I find my converted file?

  Hey,.

  You may need to visit "'https://cloud.acrobat.com ' and select the"Files"tab where all the converted files can be seen."

  Kind regards

  Ana Maria

• Facial recognition tags not appearing is not in the people page after his conversion to the PSE11 and people

  Hi Forum

  Upgrade from 10 PES to PES 11

  Attention, having spent more than 3 hours, using the characteristic face in 11 elements of marking (because it uses tags to people from earlier versions to complete the new people tab). I can only say that the result was less useless. I have now more than 1200 images marked with the wrong people and several bad people. And worse still the person who should have been marked is not there at all!

  I noticed that during the process of marking the image displayed to provide that a name is not the image in the selection of the view full screen - it actually displays a different image. So my guess is that this isn't really the face of marking you see but apply the tag to the image he thinks that that is.

  The result is total garbage... What a waste of time and effort. Not happy at all. What will be the software Adobe Version work, hard lesson learned here.

  Concerning

  David

  Title of the message was edited by: Brett N

  Just to clarify, when you convert a catalog from a previous version of the organizer of the elements to version 11, the people page is filled with tags keyword under the category (and its subcategories, which become groups). If you have organized your keywords so that you have people (even those created using facial recognition) tags in a different category than people, they will not show upward on the people page.

• Problems of mouse after the conversion of a hard drive file virtual Microsoft Virtual Server 2005 for ESXi 3.5

  Today I used VMWare Converter 3.0.3 to convert a file evaluation VHD Windows 2003 Enterprise Edition SP2 (Virtual Server 2005) ESXi 3.5. It seems to work without error. However, I have a pending issue. In other words, based on the results of pilot of "VMware Pointing Device" in my being rooted at the bottom right of the Virtual Console of the mouse. The mouse buttons seem to work, but the mouse itself will not move. I have VMware Tools installed and that you have reinstalled them several times, just in case. If I change the mouse driver to the driver "mouse Compatible PS/2", it works, sort of. It moves around the screen and the same slides perfectly in and out of the console window, as you'd like. However, it is jerky. Hardware acceleration is maximum. The video driver and all the other features seem to work perfectly.

  I converted a Windows 2008 VHD and it worked well.

  If I do a new installation of Windows 2003, it works perfectly, mouse and all. If the problem seems to be limited to a hard drive Windows 2003 virtual conversion. I don't have a Windows 2003 machine to test if the importation which would have the same bug or not.

  A very similar discussion was due in a previous thread several years ago http://communities.vmware.com/thread/36507.

  Any help to fix this annoying bug would be appreciated.

  Thanks in advance

  Normally uninstall us the services that we believe may conflict with VMware devices (such as mouse), so that these problems do not occur. But just to be sure, it would be nice if you could 'uninstall' as suggested CONTINIUM and see if that makes a difference. An only problem here, is that you will not be able to uninstall the present of the VMware VM and you may need to uninstall this VS VM before proceeding with the conversion.

  You can also see if this helps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002239

  Post edited by: paragsha

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Cannot connect to internet after Windows updates

  When I double click on broadband connection, it won't open after installing windows update

  * original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.

  Hello

  1. what operating system do you use?

  2 you get an error message while trying to access the internet?

  3 what updates did you install?

  1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps instep 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  For Windows XP:http://support.microsoft.com/kb/310353

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.

  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.

  d. When you are prompted, click on restart.

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  2 please check the items below to solve the problems of internet connectivity.

  Why can't I connect to the Internet?
  Using the troubleshooter from network in Windows 7
  Use Network Troubleshooter event logs to solve network problems

  In Windows network connection issues

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• Windows Mail cannot receive or send after update-'cannot find server '.

  Original title: Windows Mail cannot receive or send after update

  Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An error code is displayed that says cannot find server. Please advise?

  Hello

  Faced with this problem only with Windows Mail?

  I suggest to go through the following points and check the settings in Windows mail.

  Troubleshoot problems with Windows Mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• I'm unable to download the updates for Adobe reader 10.1.1. Win 7 claims that I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Here's how you can find your status:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:

  NET user "user %%nom.
  What do you see under "a Local group memberships?