Cannot upgrade Windows 8 on Windows 7 PC HP Pavilion g6-2270dx

Similar Questions

• Cannot upgrade Windows XP to Windows 7

  I want to upgrade to Windows 7 but my computer dosent want to upgrade window xp sp1i have a hp pavilion a510nwhat should I do?

  This isn't your fault. Microsoft has dropped the ball on this one.

  If you have JUST performed a CLEAN INSTALL of XP and you are at the SP1 level, you can do the following (somewhat tedious):
  Preliminary work:

  Download the SP3 installation files (SP2 is not necessary if you already have SP1 or SP1a!), IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

  In case you're not SP1 and SP1a level (effectively SP0), download the following installation to SP2 at the same time, you do your preliminary work leading up to:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Of course, you install it before installing SP3.

• Cannot upgrade windows 7 here since I am of the Iran.

  I'm from IRAN,
  Unfortunately I can't up grade my Windows laptop here.
  What should I do?
  How can upgrade windows 7 'home premium' to 'ultimate '?

  You will need to purchase a license upgrade to Windows 7 Ultimate retail. It will be either mean you need to buy at a local store computere or if you have relatives or friends in Europe, let them buy a copy for you and send it to you.

  If you can buy products online, you can probably try to purchase the license yourself:

  Windows 7 - buy, download and upgrade from Microsoft Store UK

• Scanner HP Scanjet 4200C: cannot upgrade Windows XP to Vista

  After the migration from Windows XP to Windows Vista I can no longer operate my scanner HP Scanjet 4200 C. I installed the original series of scanner HP 4200C software and plugged the scanner via the USB interface. The software starts up, but cannot find the scanner. After reviewing the HP web page I discovered that HP does not provide an upgrade to Vista; the last update they provide is for XP and not Vista-compatible. Everyone had the same problem and found a solution?

  HP has written drivers for their products, not Microsoft.

  If HP has said that there are no Vista drivers for your printer model, it has none.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=60118&LC=en&cc=us&DLC=en&submit.y=6&submit.x=9&lang=en&cc=us

  If it will not work with XP drivers on the link above:

  You will need to consider buying a Vista Compatible Scanner.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot upgrade Windows 7 Home Premium to professional

  I just bought a Satellite L650-1MC and a nice little machine it's too! Tracks of Home Premium 64-bit. I must have professional because I use this machine for work and the first three elements of the software tried to install... easy to store. So far, on XP Pro 32-bit so I want virtual XP on my computer = must have 7 Pro.

  So bought a key of the Microsoft UK (£120!) store and tried to upgrade using Windows Anytime Upgrade (was provided by the text of the presentation it would be... on child's play in 10 minutes!) ... but I can't get anywhere I get the following message... «Enter a different upgrade key - upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade...» "to intervene here, then why the hell Microsoft sell me! " ... Enter a different upgrade key".

  I know that I am naïve enough, but would be grateful for any help!

  Thank you very much

  Lindsay

  Well, I'm embarrassed to admit I rather "jumped the gun" on this one... having written and published to my request, I thought I'd see if this would help... it did! Turns out that I am now successfully upgraded to Pro.

  Sorry if I wasted all the time and... If you are having a similar problem... I recommend that go you for a reboot before panicking... like me!

• Cannot upgrade Windows 7 operating system.

  Original title: update Windows

  Mr President.
  Am using Windows 7 Ultimate 64 Bit & my laptop Configuration is: -.

  Processors: - Intel i3 - 2310 m @2. 10 Ghz
  RAM :-2Go

  I had to download Windows 8 Upgrade Wizard at level to check the result of compatibility. Please see my Compatible report and Tell Me I have Windows updated or not. Please see my attachment.

  https://onedrive.live.com/redir?resid=9ff636d2e6bf0bdf! 664 & authkey =! AABF5wAP3AVsRjU & v = 3 & ithint = picture % 2cpng or https://onedrive.live.com/redir?resid=9ff636d2e6bf0bdf 665 & authkey =! AELuHG5AMfCr5bU & v = 3 & ithint = % 2cpng photo

  Honestly, it is useless... In late summer, Windows 7 will be eligible for a free upgrade of Windows 10 and Windows 8.1 will be eligible for a free upgrade for Windows 10. If you buy Windows 8.1 now, you pay full price for an operating system you will use only for a couple of months.

  Spend money to upgrade your hardware, for example the RAM and possibly install a SSD.

  This will make the system runs a lot better when you upgrade to Windows 10. What is the brand and model of your system?

• Cannot upgrade Windows Vista to Windows 7 error 0xc000021a.

  Please if any body knows tell me? icannot do something on the computer it's jut turn

  OT:i has been upgraded to Windows vista to windows7 and error oxc000021a como computer start and stop will not is the case of 4 hours is any body can tell me what to do

  Hi Gurdhianheera,

  I suggest you to run the Startup Repair tool:

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/is-is/Windows-Vista/startup-repair-frequently-asked-questions

  See also: Windows 7 installation problems: frequently asked questions
  http://Windows.Microsoft.com/is-is/Windows7/Windows-7-installation-problems-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot upgrade Windows Vista Ultimate Edition after the HD upgrade

  I have an ASUS computer which is about five years old and works fine. It runs only Windows Vista Ultimate 32-bit SP1.
  The HD has been giving signs which is failing. I bought a new HD and copied the old HD to the biggest news. Everything seems to work fine until I tried to run Windows Update. It does not allow me to update and gives the 8024A 000 error code every time I try to run it. I called ASUS for help and they said
  to contact me Microsoft.

  Thank you

  Harold

  I found the solution to this problem. I went to another Windows help forum. It is to reset the Windows Update program. I tried the one here on the Microsoft site, and it did not work. But I tried this one http://wind8apps.com/windows-update-error-code-8024a000/ and the fist solution worked like a charm. He fixed the update and install issues with Powershell 2.0. After that and a certain number of updates, it's updated, Windows Update will update to the latest version. After this release he went and found many updates, I had to install. So be patient, you're in for a little wait.

  Harold

• Cannot upgrade Windows to Windows 8. 1 - 0xC1900101 - 0 x 40017 error code

  Original title: not able to install windows 8.1...

  I downloaded windows 8.1 but you are unable to install. Whenever I try, I get to where it is "preparing my devices", then the PC restarts with a blue screen with an error message. Then, he tries to recover the installation fails, then restores Windows 8. When the system starts after that, I get a message saying: "could not update to Windows 8.1 sorry, we could not complete the update to Windows 8.1.» We restored your previous version of Windows to this PC, 0xC1900101 - 0 x 40017 error code... "Please suggest the solution

  Hello Dr. Praful,

  Please refer to the below mentioned article where similar has been discussed, please follow these suggestions by Paul and writing that we bring to the State of the question.

  http://social.technet.Microsoft.com/forums/Windows/en-us/18828f5f-970C-4701-8EE7-92e9c836750f/updating-to-Windows-81-and-getting-the-following-error-0xc190010-0x20017?Forum=w8itproinstall

  I hope this helps. Otherwise, feel free to write us back for assistance.

  Thank you

• 8.1 Windows on which Office Pavilion g6 2270dx

  I have recently upgraded to Windows 8 8.1, and it starts on the main office, but has an hourglass of constant load running and can't click on anything whatsoever, no removal of reagent, only ctrl/all the icons.  He said that my amd graphics driver could not be found. Help, please!  My screen flashes also blue and back at the office, as he's possessed.

  Desperately need a working laptop.

  D

  Hi FlinchumD,

  I'm sorry that you are experiencing this problem.  Yes, you can do a refresh of your PC which will reinstall the original Windows 8.  If for some reason any does not solve the problem, I would like to do a cover of the plant.  Links to documents that will help you in this business are in my original post.

  You can consider contact you HP support for help, as can remotely access system to help locate and overcome these difficulties.

  Good luck!

• can I upgrade windows 2000 pro for Windows XP?

  can I upgrade windows 2000 pro for Windows XP?

  Hello

  Note Windows 2000 and Windows 2000 Professional can only be upgraded to Windows XP Professional. You cannot upgrade Windows 2000 to Windows XP Home Edition.

  "How to install or upgrade to Windows XP"

  http://support.Microsoft.com/kb/978307

  What specifications are needed for XP.

  "System requirements for Windows XP operating systems"

  http://support.Microsoft.com/kb/314865

  "Taken Windows XP supported upgrade paths"

  Microsoft Windows 2000 Professional >

  Windows XP Professional Retail (full) version
  Windows XP Professional Upgrade Version
  http://support.Microsoft.com/kb/292607
   
  "The upgrade to Windows XP Pro in Windows NT/2000"
  http://www.winsupersite.com/article/product-review/upgrading-to-Windows-XP-Pro-from-Windows-NT2000
   
  See you soon.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Cannot get windows 10 app upgrade to run

  Hello

  I have a portable extensible original and active running windows 7 Home premium and I cannot get windows 10 app to run.

  I followed KB https://support.microsoft.com/en-us/kb/3081048, got the identity of the package on the two dism/Online/Get-Packages | Findstr 3035583 2952664 and still nothing. After this I run the troubleshooter of GW10appdiagnostic and it comes always freezes in "eligibility verification."

  In addition, potential interest that I got a windows error update on the module "upgrade to Windows 10".

  

  I want to get help and upgrade as soon as POSSIBLE.

  Thank you.

  Hello Madzzz

  I suggest to you that do a manual upgrade using the Windows 10 installation media. That way skip you the step of waiting for the book to come through instantly upgrade to Windows 10. A guide step by step can be found here.

  Hope this suggestion helps you Madzzz

  Yuri

• HP Deskjet 1055 J410 series: I've recently upgraded Windows 8 to 10 of Windows but cannot connect to my HP printer Deskjet 1055

  Unable to connect my printer HP Deskjet 1055 all-in-One J410 series from my HP 15 laptop computer after upgrading Windows 8 to 10 of Windows

  Hello

  Most likely, you need to reinstall the software and driver. Please read the following instructions:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367...

  Kind regards.