Cannot use all my installed RAM

Similar Questions

• Cannot use all the tools in my annotations of design ideas in to work?

  Cannot use all the tools in my annotations of design ideas in to work?

  Probably because you have touch Active Mode. You can turn it off via the toolbar button or the following preference parameter: Edit > preferences > General > Mode Touch > never

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• Tecra A10 - 13I (PTSB0E-01400XFR): cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 13I with windows server 2008 R2, I am upgrading from 4 GB to 8 GB.

  My BIOS detect 8 GB, see Windows my 8GB (2 x 4 GB) of RAM, but I can see in "8.00 GB (3.87 GB usable)" system properties When I run the application you "Resource monitor", I see 4233 reserved material MB. Finally, if I use a VM with 4 GB of RAM, the virtual machine cannot use this reserved memory and crashes.

  I have read this thread: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0]
  I tried to update my BIOS and changed Advanced Startup Option "Maximum memory", but no change to my memory.

  Thank you
  Jonathan

  PS: Sorry for my poor English :)

  Hi mate

  TECRA A10 - 13I is certainly capable of that means you can use 2 x 4 GB RAM RAM 8 GB.

  What is the report DirectX?
  Check the value of memory here. In order to access the DirectX, you must use the command * dxdiag *.

  Greetings

• my computer does not use all of my ram

  I havd this problem before 10, but now its become a problem for me. I can only use 7.22 on my 8 GB of ram. And now when I open my application such as monitoring high game like black ops 3 and 2, he is using barley any what ram then it did when I had windows 8. It now uses 500 000 but before used as 1 000 500

  Hello

  It is quite normal because the machine must reserve RAM for video card especially in material. I can show you a machine that needs to use the 96 GB of RAM for hardware:

  

  Kind regards.

• Cannot use all tools: S

  Hello, I hope that my English ist not too bad, and I can describe my problem good enough Illustrator

  I can't use all the tools at the moment.

  If you hover over a tool tools behind it will show and you can choose a. In my case not. I can change the tool only with the ALT key.

  A few weeks ago I phoned a member of Adobe, but the number no longer works.

  I uninstalled Illustrator several times. What I've done wrong? Thanks a lot for your help!

  Janina

  Sorry for the left button of the mouse, but it's just to rule everything.

  You can try to reset the preferences file. When you start Illustrator, press Ctrl + Alt + shift.

  You could also try and set up a new user account on this PC and then launch Illustrator of this one.

• Cannot use all .exe files after connecting ethernet cord

  Just got a new House and when I moved we bought a new router and has a different service provider, my computer works well when the Ethernet cable is not connected at startup, but if it connected when I start upward or after he used to let me use just about everything, including the Task Manager and windows update. the new router we use is the a n750 linksys.

  Windows 7 64 bit
  Intel core i7 - 3770 k cpu @3. 50 ghz
  RAM ddr3 16g

  Bob,

  Try connecting the cable Ethernet on another computer just to check if the problem reappears.

  Given that the question does not appear in safe mode, we will try to uninstall and reinstall the network drivers and check if it makes a difference.

  First, visit the computer manufacturer and download the latest maps for your computer network and save it to the desktop.

  -Remove the plug Ethernet from the computer.

  -Device type in the search Manager start and press to enter.

  -Browse the network adapters, right-click on the network adapter and click on uninstall. (Do the same for all riders shown under network adapters)

  -You may be asked to remove the drivers, press Yes and continue.

  -Restart the computer and then install the drivers that you have downloaded from the computer manufacturer.

  -Connect the Ethernet cable and check if you have the Internet connection.

  -Restart the computer once more and check if the problem reappears.

  Let us know the results.

• Tecra A10-112 - cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 112 PTSB1E (Windows 7 and Server 2008), when I upgrade to 6 GB ram (1 x 4 GB + 1 x 2 GB), there is no problem what so ever (52 MB hardware reserved + 5700 MB useful) Windows.

  But when I go to 8 GB of RAM (2 x 4 GB) I get material dedicated to the memory of 4297MB and 3129MB of memory used (under windows) and I can not find how to reduce it to 6 GB levels. The bios sees 8GB, windows detects the 8 GB and the fact CPUID. I tried to update my BIOS on Toshiba support site, but I get "Computer not supported" message when I run the update file, I downloaded at Toshiba.
  Any help would be appreciated.

  Thank you

  Andy

  Hello

  It would be interesting to know which modules of memory you use exactly. You use the noname or high quality, e. g. Kingston modules?

  Maybe the modules are not fully compatible, so you should test the other modules.

  Also, what program/tool tells you this information on reserved hardware memory? If the BIOS and Windows recognize 8 GB, everything should be ok.

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Cannot use all the disk space

  Hello

  I created a RAID 5 with my dell server, it is 4 disks and total disk space is 2.4 TB.

  As usual, I installed ESXi and now it only allow me to creat 768 GB datastore.

  When I go to create the data store it says partition 2.4 TB but only said 768 is free.

  Ideas?

  Hello.

  KB 3371739 explains it all.

  Good luck!

• Advanced options of Windows 7 Search Index cannot use all the filter?

  Hello from the Germany,

  When I open the Advanced Search Options, I can add fileextensions and customize them as a filter property or goods and the contentfilter ONLY.

  There are a lot of other xml e. f. filter-filter, filter html etc.

  Is is possible to add fileextensions and use a filter more than only the cleartextfilter or properties of filter.

  Example: I add a filetype .ok. This file contains xml code. When I serch for the content, the content of the file 'ok' is not displayed.

  When I rename the file with the extension "xml", Windows Search shows me the content.

  So, if anyone has any idea I will be very grateful.

  Kind regards

  Regina

  If you are uncomfortable with changing things in the registry, you can.  (WARNING: playing with registry can destroy your computer.)  In the registry editor, see HKEY_CLASSES_ROOT\.xml.  See how there are string values called PerceivedType and Type of text/xml content with the text, and an entry named PersistentHandler with a string value named (default) set to {7E9D8D44-6926-426F-AA2B-217A819A5CCE}.  You want to go to HKEY_CLASSES_ROOT\.ok and put new it values of string such as .xml.

  You can copy the following lines, paste it into a txt file, rename with txt changed to reg, and then run the reg file.  Which will create your registry required and programming changes will appear in the Indexing Options in the way you wanted.

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.ok]
  @= "okfile".
  "Content Type"="text/xml".
  "PerceivedType"="text".

  [HKEY_CLASSES_ROOT\.ok\PersistentHandler]
  @= "{7E9D8D44-6926-426F-AA2B-217A819A5CCE}".

• Cannot use all Apps 8 Win due to the error of the UAC

  My account is linked to a Microsoft Acount and who did not.

  I downloaded the troubleshooter, and yet, it does not solve my problem.

  Split Thread: http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/cant-use-any-win-8-apps-due-to-uac-error/84851090-37c1-4574-a077-c6d940575de1

  Thank you for you reply so soon, but it has already been corrected. The firewall programs on this computer froze whenever they ran, so I decided to wipe the hard drive. Solved the problem, it took time. Thank you!

• Does anyone know why Windows 7 Ultimate using all the available RAM. Have 8 GB of memory and resources system shows 99% used. When I close the memory use programs remains at 99%. How free memory is no longer used by the closed programs.

  System has 4 gig memory upgraded to the always the same question 8 concerts. When I reboot, the memory usage is 25% and less than an hour, I'm 100% without having to open programs.

  Hello CaptainofEngineering,

  Thanks for posting on the Microsoft answers Forums.

  Is there something on your task manager see you take a lot of memory?  Continue your problem if you put your computer in a clean boot State?

  If you need help, please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CC 2015 made history States use zero disk or ram?

  Hello

  may I know if the historical State of photoshop cc 2015 uses the ram or the drive working?

  because I would increase the number in the State of history

  Thank you

  mantralightroom wrote:

  Hello

  Yes, but in the article it has

  Each State history, or snapshot, of an operation that affects the entire image increases the amount of scratch disk space requires the file.

  I guess that it is outdated, and and I guess the new photoshop uses the drive working

  In short if I increae the history State will be photoshop cc 2015 consume more RAM or use the disc more work?

  I guess the answer is that it uses both, but it will certainly impact on the RAM first.   How much RAM you have, and how many States history do you have set?   I expect to be OK with 50 States on a system with 8 GB of RAM.  I use 200 with 32 GB, but Photoshop ever closer by using all the available RAM.

  If you are using Windows, open the Task Manager > Performance tab and keep an eye on the use of the RAM and CPU.  I tried it out of curiosity and with all the States of 1000 maximum, the use of the RAM does not change until you start editing.  My system went from 6.2 to 6.8 GB RAM GB used after 100 and 7.6 GB after only 200 strokes brush strokes.

• Cannot use the capture of wacom bamboo?

  Currently, I have a capture of bamboo tablet and try to use it in adobe flash proffesional but cannot use all the features of the tablet. For the first time, there is no pressure sensitivity as I see in flash videos. also, the look of the brush is different and is not a cross. Y at - it plugins or extensions, you use the Tablet correctly? (It works in photoshop and adobe illustrator)

  Information of pressure and tilt don't show up until you use your grip on the tablet pen to draw for the first time with Flash CC. There could also be opportunities that these options are hidden according to your screen resolution. Can you please try resize your tools palette, if that's the case? Ensure that the drivers are updated correctly and restart the Flash application after updating the driver. I hope this helps!