Cannot use Cisco vpn client

Similar Questions

• Using Cisco VPN Client in Windows 7 Professional 64 bit

  Hi all!
  I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem

  Open the XP VM itself, do not use the shortcut that was published in
  the W7 boot menu. You need to install Outlook / your email client
  Inside the virtual machine, as well as on the side of W7. You can point to the same
  PST files if you have local PST files, but you just can't open them in
  at the same time of W7 and XP VM.

  There is no way to bridge using the shortcut of publishing app

  Some people have reported success with the third party IPSec
  replacements as customer universal shrew or the NCP. Your IT Department.
  would like to know if these are supported

  :

  > Hello all! I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem
  Barb Bowman www.digitalmediaphile.com

• Different classes using Cisco VPN Client VPN

  Hello

  on a cisco ASA 5510, I defined a vpn group used for remote teleworkers who have access to the entire LAN using Cisco VPN Client 4.8.

  I would give to others of this client, but I need to limit their access to LAN resources, which means that I have to have two types of users:

  Remote LAN access

  access to only certain IP addresses

  Both must use the Cisco VPN client.

  How can I do?

  Thank you

  This link should help.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080641a52.shtml

• Slow initial connection using Cisco VPN Client

  I am currently using Cisco VPN Client v5.0.07.0290.  Whenever I start my connection, it takes me about 90 seconds for the prompt to display authentication and another ~ 90 seconds to finish the auth. and connect successfully.  I have another computer laptop w / the same WIN7 OS and version of Cisco VPN Client and he ends the connection to<30 sec. ="" why="" is="" this? ="" any="" suggestions="">

  Hi Sergio,

  You import the .pcf for the VPN Client file? If so, please try to recreate a new file .pcf locally on the machine itself and try to connect. Let me know how it goes.

  Thank you

  Delvallée

• Using Cisco VPN Client VPN

  Is it possible to use a private network virtual created with the WRVS4400N router with VPN Client from Cisco Systems (ver 5) software? (Although QuickVPN works very well.)

  Is it possible to use with Account customer VPN mode? Or is it possible to use with IPSec VPN (Tunnel) mode? If so, please provide together how to client-side and the router. Thank you!

  Unfortunately Small Business routers are not compatible with the Cisco VPN Clients. The Cisco VPN Clients have more parameters that are not available in the materials of the series of small businesses, so all we can use is the application of QVPN.

• Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

  I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

  1 disabled UAC in Windows
  2 tried an earlier version of the VPN client
  3. by the representative of Cisco, I put the application runs as an administrator

  If there are any suggestions or similar stories, I would be grateful any offereings.

  It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...

• Cisco VPN Client follow-up

  Hello

  I have a Cisco 2821 and ASA 5510 VPN router in my network.

  Our remote users are using Cisco VPN Client 5.0.07 and I need to track on a server and keep their login information to generate reports for my manager.

  Could you please let me know how I can do this trick of surveillance?

  Thank you

  Mike

  It can be done by choosing one of three types of monitoring of the performance of the VPN:

  http://www.Cisco.com/en/us/docs/net_mgmt/vpn_solutions_center/1.1/user/guide/VPN_UG5.html

  I hope this helps!

• [SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do)

  Hello

  IPhone 4 s last IOS5 V 5.1.1 installed

  I'm not able to make the native IPSEC VPN connection upset my company Cisco 877

  Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877

  Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back

  An idea or a known issue on this?

  This is how I configured my VPN 877 part:

  R1 (config) # aaa new-model

  R1 (config) # aaa authentication default local connection

  R1 (config) # aaa authentication login vpn_xauth_ml_1 local

  R1 (config) # aaa authentication login local sslvpn

  R1 (config) # aaa authorization network vpn_group_ml_1 local

  R1 (config) # aaa - the id of the joint session

  Crypto isakmp policy of R1 (config) # 1

  R1(config-ISAKMP) # BA 3des

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  R1(config-ISAKMP) #.

  R1(config-ISAKMP) #crypto isakmp policy 2

  R1(config-ISAKMP) # BA 3des

  Md5 hash of R1(config-ISAKMP) #.

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  Output R1(config-ISAKMP) #.

  R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group

  R1(config-ISAKMP-Group) # key xxxxxxxx

  R1(config-ISAKMP-Group) # 192.168.0.1 dns

  R1(config-ISAKMP-Group) # VPN - pool

  ACL R1(config-ISAKMP-Group) # 120

  R1(config-ISAKMP-Group) max-users # 5

  Output R1(config-ISAKMP-Group) #.

  R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25

  R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac

  R1 (config) # crypto ipsec VPN-profile-1 profile

  R1(IPSec-Profile) # set the transform-set encrypt method 1

  Tunnel type interface virtual-Template2 R1 (config) #.

  R1(Config-if) # ip unnumbered FastEthernet0/0

  R1(Config-if) # tunnel mode ipsec ipv4

  Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile

  Profile of R1 (config) # isakmp crypto vpn-ike-profile-1

  R1(conf-ISA-Prof) # match group identity CUSTOMER VPN

  R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication

  R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1

  R1(conf-ISA-Prof) # client configuration address respond

  R1(conf-ISA-Prof) virtual-model # 2

  Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any")

  I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password

  Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released.

  With the same parameters required and confirmed in section ipsec VPN Iphone it does not work.

  It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed):

  * 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983

  * 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute

  * 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth.

  * 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY

  * 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

  * 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH

  * 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842

  * 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH

  * 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN

  * 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT

  * 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842

  * 14:29:31.299 May 19: ISAKMP: Config payload ACK

  * 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed

  * 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction.

  * 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821

  * 14:29:31.623 may 19: ISAKMP: Config payload REQUEST

  * 14:29:31.623 may 19: ISAKMP: (2081): verification of claim:

  * 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS

  * 14:29:31.623 may 19: ISAKMP: IP4_NETMASK

  * 14:29:31.623 may 19: ISAKMP: IP4_DNS

  * 14:29:31.623 may 19: ISAKMP: IP4_NBNS

  * 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY

  * 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER

  * 14:29:31.623 may 19: ISAKMP: domaine_par_defaut

  * 14:29:31.623 may 19: ISAKMP: SPLIT_DNS

  * 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE

  * 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN

  * 14:29:31.623 may 19: ISAKMP: PFS

  * 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD

  * 14:29:31.623 may 19: ISAKMP: FW_RECORD

  * 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY

  * 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA

  * 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST

  * 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT

  * 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message:

  * 19 May 14:29:31.627: address: 0.2.0.0

  * 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment

  * 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21

  * 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0

  * 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1

  * 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576

  * 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2008 by Cisco Systems, Inc.

  Updated Friday 14 August 08 07:43 by prod_rel_team

  * 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST

  * 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0

  * 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821

  * 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR

  * 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".

  * 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR

  * 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  Here the Iphone remains unused for a few seconds...

  * 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE

  * 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506

  * 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506

  * 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1.

  * 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143

  * 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE

  * 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE

  * 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233

  * 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL

  * 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  * 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.

  * 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

  * 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA

  * 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong...

  Any idea or suggestion on this?

  Thank you very much

  Hi Federico,.

  Please let us know.

  Please mark this message as answered while others will be able to learn the lessons.

  Thank you.

  Portu.

• Unable to connect using the Cisco VPN client

  Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.

  I enclose the relevant configuration information in the attachment. Any help is welcome.

  Depending on the version, add...

  ISAKMP nat-traversal

  or

  ISAKMP nat-traversal crypto

  Should be all you need.

• Cannot access network resources - Cisco VPN client

  Please see attached the network topology.

  I can connect using the Cisco VPN client and access to all resources of the 192.168.3.0 network

  I can't ping / access to all hosts on the network 192.168.5.0.

  Any ideas?

  Thanks for the help in advance

  AD

  Quite correct.

  Please add has the access list:

  CPA list standard access allowed 192.168.5.0 255.255.255.0

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here

• What are the ports used by the Cisco VPN Client?

  Hello

  I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

  I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

  What are the ports used by the Cisco VPN Client?

  Thank you

  You need to open:

  UDP 500

  ESP protocol

  You must also open the UDP 4500 port (if using NAT - T).

  In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

  1. If using IPSec over TCP 10000, then open TCP 10000.

  2. If using IPSec over UDP 10000, open UDP 1000.

• Cannot access remote resources - Cisco VPN Client

  I'm having a problem with my Cisco VPN Client. I am new to VPN configuration, so this is probably something easy I'm missing. I have a my internet gateway for my LAN 2611XM router and my VPN server. I do all my tests of a society with a high card laptop mobile broadband. VPN connects, but anytime I ping anything in the network Cabinet, he returned with the public IP address of the external interface. I have NAT overload configured so any network can access the internet, inside which it looks like may be causing my problem. I don't know how to fix it. My config running is attatched. No one knows what might happen.

  Oh, almost forgot to add. When I remove the nat overload on my interface fa0/1, the vpn will connect to any resource on the inside.

  Your nat configuration seems to be the origin of the problem. If you are using an ACL to match the source for NAT, then it will be necessary to add the line 1A refuse for the local ip pool for your vpn clients to one only. try that to see how it goes.

  Sent by Cisco Support technique iPhone App

• Cisco VPN Client anything cannot access through VPN on an ASA5505 8.4

  Hello

  Completely new to Cisco ASA and the need to get this working ASAP.

  8.4 (1) ASA 5505 is the secondary FW and I need to authorize all out and block everything coming, but for the VPN clients.  Since a jerk of Cisco, I used the ASDM and it's sorcerers to make this work, which may explain my situation.

  192.168.101.0/24 is the local network

  192.168.101.5 is the IP of ASA

  192.168.101.2 is the primary FW (and the default gateway for servers, I have to access through the VPN)

  10.10.101.0/24 is the VPN IP range (this can be what you want, I'm not married to it somehow)

  My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x or service server (tried RDP, telnet, ping, etc.)

  Configuration file is attached.

  Help pretty please!

  Thank you.

  Did you add a route for the VPN Pool on the main firewall to the ASA?

  Best regards

  Peer

  Sent by Cisco Support technique iPad App

• SSLVPN via Cisco VPN Client (simultaneous use)

  Hi, I'm working on a new show: 1) connect to the first network with Cisco VPN client. (2) to leave this connection, road to another Cisco SSLVPN device and perform a SSL - VPN connection. Has anyone tried this before? Are there problems, workarounds? Thanks in advance!

  I do it all the time without any problems.

  HTH >