Cannot use my headset wireless trubeats of amkette with windows 8

Similar Questions

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Cannot use internet in desktop mode, but can in Windows 8 mode. Help?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  I found myself with the same issue - although, for me, everything was working and then stopped at random...

  Since there is no useable answer to your question here, I begin troubleshooting me...

  What I found was a simple enough solution which seemed to reset the internet connection in desktop mode:

  1. to reveal desktop mode from the menu of charms (roll mouse over the right side of the screen)

  2. Select the charm of "settings".

  3. Select 'Network' in the parameter options

  4. right click on the network, you're connected to, and then select "turn sharing enabled or disabled.

  5 turn on network sharing

  This should reset your internet settings and retrieve your desktop mode in the loop...

• Can I use a Canon Power Shot SX210-IS with Windows 8?

  Can I use a Canon Power Shot SX210-IS with Windows 8? The software is compatible, or y at - it update?

  Hello mtjs13,

  You would be able to use the camera PowerShot SX210 IS with Windows 8.  We have a directory of software on our web site that includes a set of updates for Windows 8.  You can access them through this web link.

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• HOW TO USE BIGPOND WIRELESS 7.2 CARD WITH WINDOWS MOBILE 7

  HOW DO YOU USE BIGPOND WIRELESS 7.2 MAP MOBILE WITH WINDOWS 7 THANKS

  This has nothing to do with Windows Update. Ask for help in this forum instead, please: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• With the help of printer wireless HP Officejet 6500 with Windows 8.

  I have a HP Officejet 6500 wireless all-in-One printer and a laptop from Samsung with Windows 8.  How can I select print all, selection or Pages (option) when you print a document online or on my computer?

  I use a printer-E709n and thank you and all the others to try to help me with this problem, but I found the solution to my problem.  It seems that not all e-icons are not created equal.  I have internet access of the e icon on the start page of Windows 8 when I should have access through the e icon on the office page.  They take you to two different pages.  Open Web page through the e-icon of the start page has no internet tool gear symbol in the header (the symbol of charm tool gear does not bind to the printer either) and clicking on Ctrl-P does not bring to the top of the window to print even as in previous versions of Windows.  My spirit guide was able to get this information for me.

• Xbox 360 Wireless Controller is compitable with Windows?

  Hey, I have a question, does the Xbox 360 Wireless controller compitable with Windows too?

  Please help me.

  Hi Destinyhope,

  Yes. Xbox 360 wireless controller is compatible with Microsoft Windows.
  For more information and assistance on the Xbox 360 wireless controller, click on here.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Procrastinator XP: My wireless will still work with Windows 8?

  Boy, I feel stupid waiting for the 11th hour ask this question.  But there may be some kind guru out there who could lend me a helping hand.

  Bought my Inspiron E1705 in ' 06... short 1, 6 GHz, original 2G of RAM, Windows XP SP3, love it to death.  FINALLY, I must improve... but which?

  Ran Upgrade Wizard for Windows 7 and Windows 8 and thought that I was very good... especially that others on this forum mentioned a successful 8.1 installation on their E1705. Great.  Have the Windows 8 disk in hand, ready to install.

  But... took a last look at the list of incompatibilities on Windows 8 - and OUCH!

  INCOMPATIBLE - Intel (r) ProSET/Wireless v. 6.1.1.4

  INCOMPATIBLE - 8.65.05 Broadcom management programs

  COMPATIBLE - Connector Net Intel Pro/Wireless 3945ABG

  COMPATIBLE - integrated Broadcom 440 x 10/100 controller

  It's even worse.  Searched online - and the Intel Web site says Intel Pro/Wireless 3945ABG Net connector is NOT compatible with Windows 8, even if their assistant deputy claims it is.

  BOTTOM LINE: I have will scan my beloved workhorse ([re-installed) will stop working on my E1705 XP only to find out that my wireless adapter?

  (Interactive technical support is no longer supported - online only - and I have yet to find a person smart enough to those companies who can answer me.) There may be a here? I would be grateful. Thanks a mil.)

  As mentioned Intel can't stand but Microsoft natively support it in Windows 8.0 and 8.1 of Windows if it is not a problem. The wireless card will work directly with this operating system.

  As I did with both a Latitude D820 Windows 8.0 32-bit/64-bit and Windows 8.1 32-bit/64-bit with Intel 3945ABG wireless card. I also did with an Inspiron 6400 on Windows 8.0/8.1 32-bit/64-bit with a 3945 card and an Inspiron 6400 on a 8.0 Windows 32 bit with an Intel 4965 card. I tend to install and test the Windows installation a lot.

  I am actually writing this post on an Inspiron 6400 with Windows 8.1 64-bit and Intel 3945 card.

  You have 2 choices, clean install Windows 8.0 and upgrade to Windows 8.1 also here and here:

  • [Windows 8.0] Windows 8.0 installation
  • [Windows 8.0] Upgrade to 8.1 Windows

  Otherwise follow workarounds to download an .iso Windows 8.1 and clean install with Windows 8.1:

  • [Windows 8.1 detail] Download the file .iso Windows 8.1 retail image

  • [Windows 8.1] Installation with a generic key 8.1 of Windows because the Windows 8.0 key is rejected*.
  • [Windows 8.1] 8.1 Windows installation

  • [OEM/retail] Product Activation of a product key Windows 8.0 help to change the key of

  I prefer the second method because it will lead to a cleaner system and does not require the installation of a Service Pack via a buggy Store from Microsoft.

• Xbox 360 Wireless Receiver (not geniune) with Windows 7 64 bit?

  Hi, I intend to get a Xbox 360 wireless receiver, but I can only find is not geniune/third party products on ebay, but I have the 64-bit operating system. Descriptions for example (on ebay) "not compatible with windows 7 64-bit") is on their CD is not to have the 64-bit driver, (so if I download from microsoft.com, it will work) or it does not completely work?

  Thanks for the help.

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A210 - 27 M (PSAELE) cannot use the new wireless network card

  Hi all

  I changed my wi - fi for Atheros AR5b91 and hardware network card is locked.
  I can't remove this lock of wi - fi switch or fn + F8 probably it's the lock of the bios.

  I tried to unlock it on Windows Vista, Windows 7, Ubuntu, so it is not caused by software.
  I tried the card WiFi on another laptop (toshiba not) and it's ok.

  If anyone can help?

  Thank you

  Hello

  To me, it seems that you used is not compatible Wlan module.
  But I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=79237

  A user was unable to activate new update Intel Wlan card.
  According to some information, its possible to enable the Wlan card by covering pin 13 on the wireless Mini-PCI network card.
  But to be honest I've ever tried and I would use this workaround with caution.

• Cannot use my printer wireless message States printer offline hp touchsmart310, hpphotosmartestation

  .i hooked up the printer to the computor with usb then put in place. removed the usb because the printer is wireless?

  When you post, alsways tell your version of Windows.

  This is not usually how to configure a network printer.  You must configure the networking settings in the printer to match your local network would expect before you will be able to use wireless.  See your printer manual that describes how to configure the wireless settings.

• Cannot use the printer wireless

  I use Windows 7 and my computer is connected to the internet. I can't print wireless, I was able to before but not now. The printer is wireless and shows that it is connected. I tried to reinstall the printer, following the programs in case of problem, but everything for nothing. I was able to print a test page, but it happened once and now nothing prints. Another computer has no trouble printing to the same printer.

  What is the brand and model of the printer?

  How it shows that it is connected?

  What is the brand and model of your wireless router?  Please, look at the label on the back or the bottom of the unit and include any version of the material mentioned.

  This problem occurs quite frequently with wireless printers, usually when the printer has been turned off for a while during which other devices are connected to your wireless LAN.

  Printers almost all (if not all) are configured by default to automatically get an IP address from your router wireless.  When you initially installed the printer, Windows found the printer to this IP address and set up the printing system to direct its output to this IP address.

  If during the time that the printer is turned off you connected to other wireless device (for example, another computer or smart phone), the router can assign the originating IP address to the other device.  The router will then assign a new IP address to the printer.  The problem is that Windows is always configured to print to the original IP address... but the printer is no longer there.

  The solution is to assign the printer an IP fixed or 'static' instead of him to use its default value to obtain an IP address automatically.

  To confirm the diagnosis above, read the manual of your printer and either print a configuration page or use the LCD of the printer (if she has one) to show its current IP address.  Write it down.

  On the Windows 7 computer that does not print, open devices and printers.

  Select (click) any printer.

  Click on 'Print server properties' on the toolbar at the top of the printers and devices window.

  Select the "Ports" tab

  Scroll the list of 'Ports on this server' until you find the one for your printer.

  Expand the 'Port' column until you can see the full IP listed for your printer.

  If the IP listed here is different from the IP address by your printer, you will need configure the printer to use a static IP address.  If the IP address here is the same one reported by the printer, you have a different problem.

• Unable to connect to internet on laptop using the router wireless netgear WGR614 v9 and windows 7

  My office that I use as my host computer running Windows XP. I have a wireless network works on another laptop also on Windows XP, but cannot get a connection on the second laptop that is running Windows 7. Just bought from a friend. I appreciate any help you can give. The laptop has a Wi Fi sticker on it, so I guess he has the ability to connect. When I try to connect, it will ask me a security key. I put the safety key in and it said possible key is not. Don't know what else to do. If I run an ethernet cable from the modem and connect it to the laptop, it will allow me to connect to the internet.

  Thank you

  precionist

  Hello

  Look in the Wireless Manager and delete everything that is there.

  http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  After cleaning, connect from taskbar tray wireless icon.

  Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

  If the password does not work the newspaper to the router with a cable and restore the password.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to: Use Smart install wireless install your Laserjet on Windows 7

  Some HP Laserjet printers have Smart Install. This allows you quickly connect the printer USB cable and start the installation. In this way a CD or a CD player is not necessary to install your device. Once the installation program appears you can proceed through the installation. The following video demonstrates how to use Smart Install to install your laserjet on a wireless network.

  Smart Install of Windows 7 - HP LaserJet P1102w wireless

  I hope that the information and the video above helps. If anyone has a problem or has any questions, feel free to ask. I'm more than happy to help.