Cannot use my ipad after update 9.3

Similar Questions

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Cannot record music on ipad after update to IOS 9.3.

  Cannot record music on ipad after update to IOS 9.3. In the view 'now playing' I could tap on the title that opens a window where I could score 1-5 stars. Now by tapping on the title just changes the display of the album. What can I do? I would be very unfortunate if I could rate is no longer my music while listening to it on the IPad. The 1-5 star rating still works in Itunes, but it is a great help for me. Thanks for help.

  Try this below the steps it will work!

  You must press the title to bring up the option enter a star...

  Once it is visible, touching it will bring back the title most of the time and allow entry only part of the time.

  "need to press the title of music playback and the rating stars will appear."

• Unable to connect using Face Time after updating iOS 9.3

  Unable to connect using Face Time after updating iOS 9.3

  gshort319 wrote:

  Unable to connect using Face Time after updating iOS 9.3

  Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

  Get help if you cannot make or receive calls FaceTime - Apple Support

• Windows Mail cannot receive or send after update-'cannot find server '.

  Original title: Windows Mail cannot receive or send after update

  Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An error code is displayed that says cannot find server. Please advise?

  Hello

  Faced with this problem only with Windows Mail?

  I suggest to go through the following points and check the settings in Windows mail.

  Troubleshoot problems with Windows Mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

  I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

  It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

  Hello

  Method 1:

  I suggest you to run the fixit from the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  Step 1:

  In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Step 2:

  Check if the device is recognized on another computer.

  Hope this information is useful.

• What is the use of refresh after Update/Insert in Wizard EO?

  Hello!

  What is the use of refresh after Update/Insert in Wizard EO? When I need it and when not?

  Thank you.

  -These checkboxes are for columns whose values change after that db triggers run.

  BR, 906099

• I bought the plan for photography and still pay each month. but I can't use photoshop only after update. and they need to join a plan. How can I do? I can only use for the trial version even I never tell months.

  I bought the plan for photography 6 months ago and still pay every month.

  but I can't use photoshop only after update. and they need to join a plan.

  How can I do?

  I can only use for the same test version that I pay every month.

  Hi yejik42305752,

  Please see the following article: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  Kind regards

  Tanuj

• Problems on iPad after updating iOS 10, departure lack & no ID of TOUCH!

  I use and iPad 2 and just put Air updated to iOS 10 a few moments ago. Two problems:

  (1) when I start my iPad, the screen displays the logo of apple for a good 3-4 minutes, then it goes to lock the screen massive lag!

  (2) my iPad does not recognize touch ID! I get an error indicating that Touch ID is not available on the iPad.

  On all the sleep button has slowed too since the update and the device shows a lot of lag. I have problems with the application of music on my iPhone after as the updat as it does not work.

  It's quite frustrating and if anyone can help me on my multiple problems that had to be great.

  Thank you.

  Hello, misbah.mk!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with your iPad Air. I know how important it is that the iPad that air works correctly for you at any time. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Notes for the drawing feature does not appear in my Mini iPad after update 9.3

  After update to 9.3 on Ipod Touch and iPad Mini (original) (generation 5), the Notes applet does not show the drawing tool in the toolbar. My age of devices is the reason for this limitation?

  Post edited by: jesternrb1

  Yes, it is, or the first generation iPad Mini: https://help.apple.com/ipad/9/#/iPada9fb7c64

  Note: The sketch feature is available with notes of upgrade on iPad Pro, iPad (4th generation and later) and mini iPad 2 and later versions. If you have the iPad Pro, you can sketch in pencil from Apple.

  or the fifth generation iPod Touch: https://help.apple.com/ipod-touch/9/#/iph1e1d28202

  Note: The drawing feature is available with upgrade on iPod touch notes (6th generation) and later versions.

  Support it

• HP B210a Photosmart: cannot sweep on B210a after update to El capitan

  I have updated to OS X El Capitan and now can not scan to my iMac.  I tried to use HP Easy Scan and Apple Image capture, but they do not work or the other.  What should I do now?

  Welcome to the HP community @Sandy22,

  I saw your post on scanning problems you are having with your B210a Photosmart on El captain and wanted to answer you. You have the printer model does not have a comprehensive driver features and software available on 10.11, to this effect, you will not be able to scan with HP Software. Try to install the printer using an Apple software update after the uninstall of the printer as shown below and then try to scan using Easy Scan or screenshot images. I hope this will help you!

  1. Reset the printing system
  2. Restart the Mac.
  3. Follow this guide: Printers HP - install Mac printer driver using Apple Software Update
  4. In addition, to download this driver: HP v3.0 for OS X printer drivers
  5. Try scanning with Easy Scan and Apple Image Capture

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this helps you!

• Windows cannot open this file (after update to CC 2015.3)

  Hello..

  I've just updated 2 days ago, and now all the file adobe icons give me this message when clicked on:

  "To open this file, Windows needs to know what program you want to use to open it.  Windows can go online to look it up automatically, or you can manually select from a list of programs installed on your computer. »

  If I manually select the program, he acts as if nothing is selected,

  If I try to watch online, it returns without any results...

  My only solution is currently launching Adobe Premiere, After Effects or any software and the use of the menu open from inside the application.

  
  Opening files of their records is not an option now at all :/

  Please advice

  Please check if it works Premiere Pro 2015.3 problems after update to 2015.2 if it's for Premiere Pro.

  You will be advised to discuss with us to Support Adobe

  Concerning

  Stéphane

• Acrobat XI cannot reach activation server after update

  XI Acrobat bought for my wife (this is the version that she needs) a few weeks ago.  Did a clean install on a new machine and activated correctly, no problem.  It worked exactly as it should.

  Tonight, she did something really terrible, she agreed to do an update.  At the end there, impossible to reach the Adobe server to activate.

  Troubleshooting, it seems that it cannot reach the Adobe server.  I tried on my machine and I could not reach him; she refuses connections.

  Is this intentional, a way to kill older versions of Acrobat?  She cannot use the newest one, he must be pro XI.  The server still exists?

  Does anyone know a workaround that will repair Acrobat XI on his machine?  Should I delete everything and reinstall from the original CD?  And tell him to NEVER accept "updates?

  I discovered the problem.

  I am the victim of a fraud, the software I bought is fake.  It was a bit

  develop, in that the installation process creates a hosts file which blocked

  all access to any Adobe authentication server address.  Apparently the fake

  Serial number fooled the program itself, but it cannot validate at Adobe.  When my

  wife did the update, for some reason, he attempted to validate again and this is where

  He failed.  I do not know if he would have continued working if she had not

  the upgrade, but I always discourage updates that many end up breaking

  something.  Yes, I know the security implications, but I had two

  orders of magnitude more broken with updates that the security problems if

  will try my luck.

  Now, I'm the money I spent, but since (for compatibility reasons) my wife

  needs XI pro, which is not sold by Adobe, I have little chance.  I have

  don't want a pirated version but, apparently, selling online, at least on ebay, can

  trust.  Techsoft24 in London seems legitimate and I can try it, unless someone

  can suggest a better way to buy a package of Acrobat Pro XI legitimate known.

  Peter

• RAV of the camera cannot open NEF files after update 2015?

  Hi, my camera raw can't open NEF file form nikon D300s after update. It seems that Raw can not load the version 9.1.1. I also installed the zip file with the version 9.1.1. Adopes support site, but it does not erase the pain.

  Someone who can help?

  Windows 7 pro

  Photoshop CC 2015

  Hi 2hani,

  • Open Bridge or Photoshop
  • Go to preferences - camera raw preferences and uncheck CPU chart use
  • Restart /Bridge PS and then check again.

  Concerning

  Rohit

• I can't use Lr5.6 after update Lr5.5 to Lr5.6

  I can't use Lr5.6 after Lr5.5 to Lr5.6 update and now it ask me the serial number or 30 days

  Please help me thank you very much

  If you run the LR 5 Cloud creative photography program, try the procedure described here:

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

  If you run LR5 as a stand-alone series-number-license version, then enter your serial number, once again.