Cannot use other printers

Similar Questions

• Cannot use other funds of screen - don't change other Linux wallpapers

  I've always been able to change screen, often using 4uwallpapers - now, he'll let me just use screen Linux and then only those (which I don't like) located in the appearance section of the system.

  Sorry, this isn't a problem of Firefox support, the operating system manages the wallpaper.

  http://UbuntuForums.org/

• Cannot use other applications while listening to iTunes

  When I choose to iTunes, it rises and fills the entire screen. There is no red, yellow or green, points to reduce so that I can choose another application to work on as an Excel spreadsheet, while listening to my iTunes music. I'm used to be able to do this. I have OS X Yosemite, 10.

  10.5.

  Have you tried moving the slider at the top of the screen?  If you do this, you should see the points red, yellow and green.  Click on the green button and you'll be all set.

• Cannot use ehrn 'ask whenever I have send msg' other e-mail applications download

  There is no ' ask each time I have send a message "when you use other messaging applications. I downloaded a messaging app, and I could not use 2 sim at the same time.

  Hello!

  This is the normal behavior of the Android operating system. Nothing other than the built-in messenger app can use both SIM via the dialog box messages. All other applications will use the default SIM card, which can be selected in the settings (default SIM for other messagining applications). If you want to choose the SIM card for each message sent, you must use the built in application.

• Cannot see other computers on my workgroup

  I wiped my computer "arizonahp" and did a fresh install of Windows 7 Ultimate 64 bit.  Everything works fine except that it cannot see other computers on my working group (all current running xp) and they know more see 'arizonahp '.  I clear my name of working group "yorklan" in my computer.  Previously, arizonahp was a vista machine and he could see and be seen.

  What could be the problem?
  Thank you
  Gary .net developer

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• Cannot use or restore Vista after SP1 uninstall

  original title: cannot use or restore after uninstalling SP1 Vista - please help.

  In order to perform an upgrade of Vista installation to repair the damage caused by a virus recently, I uninstalled Service Pack 1 (because installation upgrade will not work with SP1). I know there are other things I should have done (a sfc/scannow in theCommandPrompt) or SP1 slipstreamed DVD, but I did not know them at the time, nor did I think there will be problems as a result of an uninstallation of SP1. As the title suggests, I got kind of wrong.

  It all started after uninstallation, which seemed successful. I rebooted, and instead to get Vista without SP1, I get an error code of the variety of the command prompt (just the black screen with white writing). This continues for a couple of times, and after a few remedies attempts that fail miserably, I decide to systemrestore(using the Vista CD, of course) at a point before uninstalling SP1. I think it will work, but the first time, as it gets to the "development of restoration" and how he hung for three hours before, I decided to turn off the computer because he was of course not moveable anywhere. I restart and let the boot from HARD drive upwards to see if maybe something worked, and I get to the login screen of Vista, how I notice none of my devices work. The mouse or the keyboard responds (both are USB) and the attempts with the PS/2 versions don't either. I thought maybe it was a driver problem, so I reinstalled the driver chipset at the disk using my laptop (took thedesktopHARD drive, put in a box outside, then executed the installer of the chipset on my laptop and said to install outside driver), but it could not solve the problem. I also tried other restorations, but invariably they fail after a certain point, which gives me an error message:

  "System restore failed due to an unspecified error. The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction. (0x80071AA7).

  I googled errormessageand see that most people encounter it while trying to install a service pack, I thought it was a problem with restoring Vista without SP1 to Vista SP1. Thusly, I used the command from theVistaCD command-line option to read my Windows Update log and got the following:

  "2010-07-09 04:44:32:593 664 29 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =".
  2010-07-09 04:44:32:593 664 29 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 04:44:32:593 664 29 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 04:44:32:593 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:34:605 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:36:617 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 15:26:30:160 216 12 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 15:26:30:160 216 12 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 15:26:30:160 216 12 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 15:26:30:160 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:32:172 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:34:185 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 16:04:19:912 356 Misc 3 b 0 = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:04:19:912 b 356 3-0 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:04:19:912 b 356 3-0 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:18:08:745 532 248 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:18:08:745 532 248 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:18:08:745 532 248 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 Misc = logging initialized (build: 7.4.7600.226, tz:-0800) =.
  2010-07-09 16:25:53:894 976 244 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:25:53:894 976 244 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:25:53:894 976 244 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 COMAPI WARNING: failed to connect to the service. (HR = 80080005) »

  I can't interpret it, although it seems to confirm my suspicions the transition from other than the SP1 and SP1 is causing issues. If someone else could interpret this?

  Basically I have a non-functional operating system, I can not restore it to a State of operation, nor access the input devices because it does not work on the login screen. Anyone all proposed solutions to the problem, short of a clean install of Vista? I don't want to reformat unless absolutely necessary.

  This is the forum Vista install.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  You can try the repair Forum.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot use Bluetooth notebook Mouse 5000 - mouse in Windows 7.

  I do not understand, cannot use the notebook mouse 5000 in Windows7. When the Logitech mouse can. I can be found by bluetooth, but it has not installed all the drivers. And it cannot be used at last. I have no why material made by Microsoft may not be recognized by the new Microsoft System. I think it's funny. However, in the website of this mouse. It was said to be supported by Windows 7.

  I have Windows 7 Ultimate 64 bit and you are using the Microsoft Bluetooth Notebook Mouse 5000.  I tried the way Service.MSC recommended to select automatic and then local system and then OK and and so on.  It does not work.  I thought the mouse was defective, but then I tried to pair it with three other phones and it is paired with each other.  Why not on Windows 7 system?  I found the problem.  In all humility, wait a few days before making the following fix to give time for a technical genius to say that it is a good solution or if I just open my system to a host of other issues.  What I can say to you is the failure to connect the mouse has been frustrating but the fix I suggest worked instantly.

  Go to the icon START and type services. MSC and some SERVICES.  The dialog box that opens has a long list of things but find BLUETOOTH SUPPORT SERVICE and double-click or open it.  Select AUTOMATIC.  See the LOG on tab.  Choose the LOCAL SYSTEM and this is the road to nowhere.  This was the recommended fix, but it has never worked for me.  Select THIS ACCOUNT instead.  Type of LOCAL SERVICE.  NOW; If you click OK, it will say select password invalid or such.  No problem.   This; type Local Service in the dialog box, and then delete (a 15-dot-string) password points under the password and remove the string under confirm (the two password boxes are now empty).  Choose OK.  SUCCESS.  It should then tell you to STOP the service, then re - start the service before the change to take effect.  It should work now.

  The first thing to understand I guess, is that there is a difference between the LOCAL SYSTEM and the LOCAL SERVICE.  Configuration help dialog box says the password in the choice of LOCAL SERVICE is a null password - that was my idea.  When I chose the LOCAL SERVICE (typing in the line of dialog box) I would always get the password box and this is what brought me to take a break.  Since it is a NULL password according to the Help menu - then you should be able to remove it?  Yes, I did.  He accepted my change and after stopping and restarting the Microsoft Bluetooth Notebook Mouse 5000 service (don't use any transmitter/receiver) has worked perfectly and CONNECTED!

  I compared all my other systems that accept pairing by checking SERVICES. MSC and each computer using LOCAL SERVICE AND NOT of LOCAL SYSTEM!

  There you are!  As I said to the expectations of the beginning to see if a technical person writes and says "do not follow this recommendation.  I have no computer knowledge and my dose could have opened other problems outside power connect the mouse, the object of the exercise.  I'll look for it, too, in case I just create an unintended complication of other stuff like viruses, malicious this-and-that, and so on.

  I post because the solution worked and I wanted to share the solution of all the many hours of total frustration in finding a solution to the question of the mouse.

• Cannot use Picasa get message Internet Explorer cannot open the program

  Original title: Picasa & gmail.

  Picasa - I can use the program to import images, editing, downloads of albums, etc., and I used to be able to send the album to some of my

  contacts. ALSO - I used to be able to look at Picasa albums sent me to display... NOW - I GET A MESSAGE THAT THE INTERNET EXPLORER

  UNABLE TO OPEN THE PROGRAM.  I changed a few settiings - any thoughts - I use BING should I change chrome?

  In addition to HOt MAIL account, I also have a Verizon account and a GMail account.  I can access all three accounts - however - WITH gmAIL

  I can send & receive - but can not get on my gmail homepage... Ideas on this subject.

  Thanks for your help

  Isadore salvation,

  Welcome to the Microsoft community!

  You cannot use Picasa get message that Internet Explorer can not open the program.

  The question is perhaps because of settings or firewall.

  I suggest you to refer to the procedure described in the site:

  Download Troubleshooting

  http://Cat.Microsoft.com/ticket.aspx?ID=908433&threadintid=908433&forumid=5&ThreadId=0c5a0295-efd9-4f34-9ED5-98d4374e30bf

  Important note: firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Cannot use the Start button

  For some reason, when I try to click on the Start button, it disappears.  I tried all day to dissable addons that sort, but it ended up doing another way.  I have restarted computor, but the Start button, always goes away until I can click on it.  Everyone comes through this before please?

  Hello BeverleyMacKenzie,

  Thank you for the question!

  I'm sorry to know that have problems you with start button. As I understand it, you cannot use the button start effectively.

  Method 1: perform the scan SFC (System File Checker) and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Answer to us if you have problems with start button or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

  Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

  Example: I have 4 pages and alone is fluid and the other are fixed?

  Yes, you can have effects from scrolling on a site which is partially adapted to the needs, as each page is independent of the others. Muse only disables the effects when you add a breakpoint to a page.

  David

  https://creativemuse.co

• Cannot install "other devices."

  Model of laptop Presario 3000 3017 cl

  Cannot install "other devices" - Multimedia Audio Controller - network controller - PCI Modem - video controller.

  As it might seem... or does it not perhaps achieve in a straight line.

  Do you have a full format and complete installation, after insidious "infections".

  Used the original disks, operating system and fast food. BUT accidents of fast food on the 3rd disc with a something error message that a file is damaged or not found 'image' I think he said.  This does no less than 3 times.

  In any case... I find myself at good ol' ' C:\

  So I used a different but different version of XP with SP2 and that's what works now.

  It is more on the C: partition where I imagine that some of the original restoration info has been stored.

  Especially I don't want to go through the fast food again and the end upward with all these things that I do not need or want. I want to just reinstall "other devices." Can you help me please.  =)

  Other remedies I found on the site do not seem to work...

  Longtooth

  Hello

  Download it and install it

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&product=295819&lang=en

  also you can upgrade your Windows XP SP2 to Windows XP SP3

  http://download.windowsupdate.com/msdownload/Update/Software/svpk/2008/04/WindowsXP-KB936929-SP3-x86-enu_c81472f7eeea2eca421e116cd4c03e2300ebfde4.exe

  Kind regards

  EverWin

• Creative cloud tries to update everyday and is stuck with by mistake, cannot use, update, uninstall, or reinstall...

  Creative cloud say there isn't another installer running and close first... There is no installer running!

  I can't log on, can't uninstall, can't repair or reinstall, can not update, cannot use app, can't do anything... looked at the other questions and tutorials but can't find a solution to help me with this problem.

  I use windows 10. Please what can I do?

  

  Please see installation cloud creative error 87

• I've got LR 5.7 and I installed (Windows 7/64) profile of color ICC Blurb but I cannot use it to create a copy for proofing. How can I do?

  I've got LR 5.7 and I installed (Windows 7/64) profile of color ICC Blurb but I cannot use it to create a copy for proofing. How can I do?

  Blurb profile is CMYK, and so does not test in Lightroom. Having said that, really, you don't want to use their profile for nothing because they use a lot of different printers and that a profile will probably not represent the printer that is actually used, so it is useless and could lead you to the wrong path. Expect variability in reproduction of the color of their share even if you send the same task twice. Nothing you can do to control that unfortunately. Wobertc advice is spot on. Don't worry if you ship it directly from LR. Use sRGB if you export images to use in another page layout program. Forget proofing for this service.