Cannot use scanner on my Tecra M10 finger print

Similar Questions

• Cannot use the recovery on Tecra A5 console

  I have an old laptop Tecra A5 and I got the windows error message didn't start because the hal.dll file is missing or corrupted after the search support forums to get answers have tried to solve this problem by going into the recovery console via boot disk I get to the configuration screen and various files load but doesn t get home to set up the screen so t access the recovery console.

  Any ideas any help would be great. This laptop came with XP Pro preloaded so don't have original XP disc.
  stocktaker

  Computers laptop Toshiba were delivered with Toshiba recovery disks and not drive comparable to the WXP Microsoft installation disc. These recovery disks cannot be used for the repair option, but for a clean install only. So, after reading your ad I n t understand what disc you are using.

  Anyway, what you can try is to get somewhere original Microsoft installation disc and try to fix it using the REPAIR option.

• Cannot use scanner with WLan with printer ADVENT AW10

  I have a Satellite L500D-11R using Windows Vista.
  I bought an ADVENT AW10 printer with wi - fi functionality.

  I am able to print documents and photos without problem, but I can't use the scanner with a wi - fi connection.
  After that several long interviews with the advent of support, not very helpful, asked me if I had Twain_32 on my laptop.

  I searched on my machine, and there is no trace of Twain.
  I need to download the current version of Twain_32 and were advised to obtain from the supplier of my laptop.

  The web, I learned, is not the safest way to download Twain_32 because of security concerns.
  I looked for a Toshiba and Microsoft Download with no luck.

  Can anyone help?

  Hi mate

  I think that it is not a question of Toshiba, but this question should be directed to the support of the manufacturer of the printer.

  However, our community is trying to help everybody as much as possible
  I searched a bit and found this video youtube how to fix error TWAIN_32.DLL

  http://www.YouTube.com/watch?v=H6nLWR9TLgY

  Otherwise you will need assistance from the manufacturer of the printer

• What about error 126 & 1068? Cannot use scanner or printer.

  I keep getting notes saying 'the service is not running' went to 'services' and enabled the number of items that seem appropriate, but I seem to be missing some key service module.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  126 error usually means that some module, named in the error message cannot be found.

  In general, it is much more helpful if you quote the whole of the text of the error messages, without paraphrasing.

  Without more information from you, my ma conjecture guess is that you used to have a Lexmark printer (or printer Lexmark Dell-badged) and then uninstalled.

  So...
  What are the brands and models of all currently installed printers?
  Have you already installed Lexmark or Dell printer?
  What happened to your computer before the problem occurs?

  To deliver your print system to its "normal" configuration
  Click Start, and then click Run.
  Type the following in the "Open" box, and then click OK
      dependent on the spooler of sc config = RPCSS

  Make sure there is a space after the = sign, but not before he

  You should be able to print without these errors now.

• Cannot use the HP CD to install my printer to my new Surface Pro 2

  I need to install my printer HP Photosmart Plus B209a-m to a second computer, but it's a 2 Surface Pro who does not have an E drive or a USB port to connect an external drive.  My 2 Surface Pro works on a Windows 32 bit OS 8.1.

  Could you please provide me a link so I can install from that?

  Terry Sullivan

  Hello

  Please, download and run the Installer printer HP www.hp.com/go/tools

• Satellite X 200-response of poor quality for the finger print scans

  Hello

  The scanner on my X 200 finger printing has recently begun to return a response of 'Poor quality' finger scans for Windows Vista logon.
  He had worked flawlessly since purchase, but all of a sudden (not gradually anyway) stopped scans for connect.

  My first thought is maybe a Windows update broke something but I know not where search, everyone has seen or heard talk about it or know how to solve the problem, I can hardly believe that it is a hardware problem, that one day he was working the next day it wasn't.

  Thanks in advance,
  Josh

  Hello Josh

  This can happen from time to time. I recommend you to clean the sensor. I hope after that cleaning, it works well again.

• Tecra M10 cannot install OS using disc SSD Kingston

  Hi all.

  I am a computer tech and can usually find a way to fix something myself, (rock Google!).

  But recently I had a Kingston SSDNOW 64 GB drive and decided to install in my Tecra M10 age of 12 months. 4 weeks ago I had a full head of hair, now I am completely bald.

  The drive is recognized in the BIOS, but whenever I try to install Windows on it, I get nothing. I tried the recovery DVDs XP, recovery DVDs Vista The, the "free" upgrade Windows 7 recovery DVD, and a DVD Vista & Windows 7 retail. I can't drive to be recognized to install Windows.

  I can copy the existing disk image, but it starts the splash screens and blue. Normally I think that driver RAID or hard disk controller, but Kingston assures me that there is no requirement on the one hand, (and a standard SATA drive does not require a, I tried).

  I checked and installed the latest version of the BIOS for laptop. There is no update available for the SSD firmware. So I find myself with a laptop that always uses a slow, (relatively) hard drive and a very pretty silver rectangular Clipboard.

  Can anyone think of anything whatsoever that I missed. Anyone working for Toshiba can tell me if there is a BIOS update for this problem (I search the forum and found many people who are struggling for SSDS working in Toshiba laptops)?

  The sad thing is that the former other laptop I got for my son accepts the player and works fine!
  I had many prefer to buy Toshiba, but I want SSD technology rather sooner than later, and if Toshiba does not go to support, I might have to change of Lenovo or Acer.

  Rob.

  > Normally I would RAID driver or controller hard drive, but Kingston assures me that there is no requirement on the one hand, (and a standard SATA drive does not require one, I tried).

  I think you have misunderstood something the SSD drive does not need SATA drivers BUT the fact the OS (Win XP, Vista or Win 7)!

  The SATA drivers are needed to recognize the HDD/SSD under Windows OS.
  New generation of portable supports the new SATA controllers that require SATA drivers.

  You will find on the European driver Toshiba Intel Storage Manager page

  Intel Storage Manager contains the SATA drivers that are required to install the OS.

  Welcome them

• cannot use three finger view Preview

  cannot use three finger check to open in the preview pdf

  If you mean that you can't have three fingers tap the trackpad for Quick Look, a file, I got that too. One of the best features of Mac OS x, so I hope they fix very soon!

• Can I use Tecra A10 OS disk to install the OS on Tecra M10?

  I have a tecra A10 complete with Windows Vista Business installed (and saved in an image using Easeus Todo backup file

  However I also have access to a Tecra M10 entered without an operating system, although the sticker COST (product key) is the same for a windows Vista Business.

  My question is: would my Windows Vista Business backup work A10 on the M10 (i.e. would it load hard disk M10 and then to work properly)

  If someone can advise on this subject I would be grateful if you please

  Best wishes
  Ian

  At first, I must say that Toshiba recovery image created separately for each laptop model and it is 100% created to work on the specific model. Why?
  Each laptop model has different hardware platform and all the drivers, tools and utilities for some models are part of the recovery image. These recovery images are also tested.

  Generally if the two models have the same hardware platform (hardware) it can be used.

• Tecra M10 - 17U use second HARD drive in the Bay of ODD

  Hello

  I try one of this popular box that allows me to put a second hard drive in the Bay optical slot, I use a Sata to Sata adapter, so there is not really an adapter and more properly connect:

  [http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub = 2.5%20Enclosure&model=AK-OA2SSA-BK]

  My problem is with the BIOS Toshiba waiting for a STRANGE device in this Sata port and cams out with a "CD" error, disable the Sata port.

  I have a workaround, if I start the PC, BIOS after with what this either in the Bay of the STRANGE, after Windows starts, I have insert the second HARD drive in the Bay of ODD, go to "Windows Device Manager" a 'check for changes on the hardware"and voila, the second HDD works fine , for me, it shows a limitation in the BIOS.

  Y at - it assistance, a Beta BIOS or something else, I have the latest BIOS 3.00 for this machine installed.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39412

  It seems that Tecra M10 does not support a select bay that would allow you to use a 2nd HDD rather than the ODD.
  As far as I know select bay is compatible with the Tecra M1, M2, M3, M4, M5, S1, S2

• Tecra A10 - 13I (PTSB0E-01400XFR): cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 13I with windows server 2008 R2, I am upgrading from 4 GB to 8 GB.

  My BIOS detect 8 GB, see Windows my 8GB (2 x 4 GB) of RAM, but I can see in "8.00 GB (3.87 GB usable)" system properties When I run the application you "Resource monitor", I see 4233 reserved material MB. Finally, if I use a VM with 4 GB of RAM, the virtual machine cannot use this reserved memory and crashes.

  I have read this thread: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0]
  I tried to update my BIOS and changed Advanced Startup Option "Maximum memory", but no change to my memory.

  Thank you
  Jonathan

  PS: Sorry for my poor English :)

  Hi mate

  TECRA A10 - 13I is certainly capable of that means you can use 2 x 4 GB RAM RAM 8 GB.

  What is the report DirectX?
  Check the value of memory here. In order to access the DirectX, you must use the command * dxdiag *.

  Greetings

• Choose use Bay does Tecra M10

  Someone knows what kind of select bay (slim, ultra slim, very fat or what) use the 'new' Tecra M10 and can tell me where it is written that info on an official site of Toshiba...

  Tip: don't waste time uploading the plug technical Toshiba, it isn't there, don't waste time to download the user guide; It is not there either...

  Pat

  Tecra M10 didn't select bay and that's the reason why you can't find information on this topic.

  Good bye

• Tecra M10 - 11U - DVD + cannot read & disk partitions

  Hi all

  I just got my new Tecra M10 - 11U and noticed 2 things troubling
  (1) my DVD cannot read DVD + R - Vista recognized the DVD and its type, but cannot open it. Ideas?
  (2) my drive letters are C and E, where is my D drive, is the hidden recovery drive?
  Is it safe to change the E to D drive

  Nirko

  Hello

  1. it is not easy to provide a response to this. The question is rather general and who knows what kind of things is on this DVD + R media.
  2 D drive probably doesn t exist. You can check if the D drive letter is available for free. If so this means that this player is not available. You can check in computer management > disk management. Choose the second partition and click with the right mouse button > choose the option change the drive letter or path. You will see that D is available here.

  Recovery disk doesn t exist and it is not hidden. Toshiba recovery image is saved in the folder called HDDRecovery on the second partition.
  * You can change the drive letters, but before you do anything whatsoever, please create recovery DVD.*

• Tecra M10 - cannot uninstall or install Power Saver code 0 x 0

  Hi people,

  on my new Tecra M10, after logging in, I get a fatal error message "Toshiba Power Saver. Fatal error has ocured. This program will take end code 0 x 0.
  I can't install a new download of Eve up what I uninstall the existing.

  When I try to uninstall through Control Panel, I get the same fatal error.

  Hi mate

  You know the CCleaner?
  It s free and it cleans the registry and OS, help you remove installed applications.

  I recommend that you install this tool. Try it and you can use it to remove the energy-saving and clean the registry.
  I recommend you to run more than once in the line in order to clean the whole registry

  Should help you

• HP ENVY 15 laptop: I want to use scanner printing build - in finger

  Hello

  I want to use Windows 10 build - in finger print scanner (without using the simple past). In fact, I can add my fingerprint in Windows, but when I try to log in, nothing happens. Simple pass works without problem.

  Regarding

  HP Simplepass seems to interfere with built in finger of Windows Service. I had the same problem you did.

  Since my laptop has refused to install the update for HP Simplepass Assistant HP told me to install, I completely uninstalled HP SimplePass.

  Then, I went in the Services pane and restarted the Windows Biometric Service.

  Boom, the built in Windows 10 biometric identification elements now work perfectly.