Cannot use the CD recovery 2 - where to buy one?

Similar Questions

• Cannot use the webcam in hp Omni200 all in one PC

  I have hp omni200 5320il PC AiO... but am unable to use the webcam... Do I have to install drivers?

  Sarbjas1726,

  I want to access the BIOS and check to see if you can reset it.

  1. turn off the computer

  2. as soon as you turn on the computer repeatedly press the F10 key

  3. If you should drive in the BIOS configuration screen

  4. once he look down, lower-right, angle and you will see a guide that will show you what each key

  5. If you see the keys F5 or F9 to load default press the corresponding key

  6. then agree to the prompt that is displayed

  7. Press F10 to save and exit

  If you are able to do so, test to our webcam once return you to the main screen.

  Please answer as soon as possible.

  Thank you

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Satellite L450D - cannot use the product recovery disc

  Hello

  I'm new to this forum and have spent 3 days reading this and other forums to try to solve my problem, I found a lot of answers, but none does not work for me so I'd see if I could get the thought some very great need help here.

  Now, I have the problem that when I start the laptop the windows logo appears, then Microsoft corporation through the bottom and then the screen black with the cursor of Pentecost, I tried all possible starting in the bios settings and just goes back to this screen, I can t get no prompt or anything like that , I used knoppix and managed to transfer all the files I need from my external HARD drive, so thought I would not reset to factory settings with the recovery disk of the product supplied with the notebook, the disc never has been used or taken from the package until now is so in perfect condition of the art, so I put in the drive , start computer press f12 and make the primary boot CD, but all that happens is it says windows is loading files and get back to the dreaded black screen and a cursor.

  Can someone please help?

  If you have the original Toshiba Recovery disk I assume you have older model laptop with Windows XP Home edition old. To be honest, it would be interesting to know is you.

  In any case, out of curiosity but can only begin preinstalled OS in safe mode?
  Enter the BIOS settings and set its default value initially. After ding this change BIOS boot order and place the CD/DVD as first boot device. Put recovery media in the optical disc drive, and boot up your laptop. While the laptop tries to start C press several times.

  Usually, this should force your laptop to use ODD as the first boot device.
  Long ago, I had similar problem and such combination helped to force the ODD to read the recovery disk and Windows XP Home edition recovery facility. Of course, I hope that everything is OK with your HARD drive.

  Please test and send feedback.

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

• cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

  Hello.

  When I open My Webcam Central on my Inspiron One 2320, I get a nice message on the right hand bottom corner 'not supported Webcam. Hmmmmm. When I try to play a DVD, no luck.

  I use Windows 8.1

  I went into the Manager.Under Imaging device, there is no sign of a driver for the webcam.

  In the section DVD, States of CD-ROM/DVD-ROM HL - DT ST DVDRWBDCT40 N does not properly. When I right click to update him pilot-still no worky.

  Thank you for your help!

  Nora

  The webcam is already installed. Central webcam is software and is also already installed. Look at the illustrations in the Quick Start Guide in the list of books below and see that the camera is located on the bezel at the top of the screen has a cover and light. Remove the cover to see if that helps. If you're still having problems, go to this site to help support more-

  www.Dell.com/.../manuals

• Recovery disk misused in Compaq Presario M2000. Now cannot use the computer

  Original title: HELP Please

  I recently got a computer (Compaq Presario M2000) of my grandmother, and when I get it home I discovered she used the wrong recovery for this computer recovery disk. What gives that I got much troubl trying to recover this computer WITHOUT the disk recovery for the computer... IV looked at the HP site found no record that can be downloaded or even bought... iv lloked EVERYWERE I think and I'm a little discouraged gting... I have a key to activate the button on this if I'm looking to see if I can be legitimate to get this kind of things computers in order (readers, the operating system everything) if somone could help me solve this problem I would be SO GREATFUL... Please help and thanks for the help :)

  If you can please email me at * address email is removed from the privacy * :) Thank you SOOO much if people help :)

  Hi DanielNutter,
   
  You may need to contact the computer manufacturer for assistance on the issue.
   
  Get help - Compaq Presario products
  http://www.Compaq.com/CPQ-country/cpq_support.html
   
  I hope this helps.

• Cannot install SP2 after you use the sony recovery disk.

  After Reformatting drive C using the Sony recovery disk, I am not able to download windows SP2 successfully.  Is there a code number I should be go in first.  Windows XP was already preloaded.

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW to get a computer running slot than WinXP SP1 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.

  Update Code error 80070490

  There, I had a update failed on Windows Vista Service Pack 2 (KB948465).  I tried the Mr. fix it, but the execution software failed.  Some time later, I'm now at the point where all of the updates fail and gives me the error code 80070490.  I tried the system tool - didn't work.  My computer is preinstalled with vista home premium, so I have no disks.  I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.  Choose 'The essential system updates for Microsoft Vista SP 1'?  If so, he wants that I uninstall first.  How can I do this?

  Hello

  For any questions about the HP recovery process, contact HP.

  Here is their Web site about this link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  This is the Microsoft Information about your error code 0 x 80070490

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  To make the Installation of repair upgrade in the Microsoft link, borrow Microsoft Vista DVD a friend.

  Here is the information on how to do it:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Cannot use the timecode source in my project?

  I do not properly understand that Premiere Pro that you cannot use the timecode source in your project? I know that I can change the BEGINNING of t - c in a clip, but I need to read it off the camera (XDCAM EX3)? And if indeed I can't use source t/c - WHY NOT? My files audio syc'ed must be Sync manually!

  Thanks for a reply Adobe

  You can read the timecode source of your clips in several locations within Premiere Pro.

  If you load the clip from the source to the source monitor, don't you see the time code of the displayed item?

  Where you are waiting to see the timecode and don't see it?

  MtD

• Cannot use the command clause contained in the posting online of a cursor

  Dear people,
  I use Oracle 10 g with forms 6i. I had a requirement where I gotto choose the latest ten records and view the sorting in the opposite order.say for ex.
  

  Cursor C is select * from (select ename,sal from emp order by sal desc) where rownum<=10;

  But my problem is all the time that I came to know that we cannot use the order by clause in the view of a cursor line in forms 6i. Think it's one of the limitations of forms 6i.so u can suggest me what I can do to get the expected results? do we not have any alternative?
  
  
  Thanking you,
  
  
  Concerning
  Vids
  
  Published by: vidusnat on July 4, 2012 03:38

  Hello
  Please specify!
  Forms 6i must be with an older version of SQL and PL/SQL (8.x).

  To keep it simple create a VIEW in the comics with your as its source and the use of the VIEW in the form. As you noted, it works in 10g and exploit it.

  See you soon,.

• Tecra S1: Step by step how to reformat HARD drive by using the product recovery CD

  OK guys, I'm about to return my lease (Toshiba Tecra S1); because the video card is 'us' and I would like to reformat the drive and return the system to its original state by using the "product recovery cd-rom provided Toshiba."

  My problem is that the video card is on the right track and using windows is a challenge quite like its like watching a patchwork blanket. So, when you try to use the recovery of product cd-rom, I can just not read the screen "its comparable to the matrix.

  I really need a tutorial step by step with screenshots at each step 'a map of the fool '. Can anyone help.

  Thanks in advance,
  Robsta

  Hello Robsta

  Believe you did not need the step by step tutorials or shoots screen. The recovery procedure is very simply.

  Put the recovery CD in the CD/DVD drive
  Turn on the laptop and keep C button for a few seconds
  Follow the menu on the screen
  Choose option 1 for installation in Standard mode and just follow what is happening on the screen

  All that s!

• Re: BSOD after using the Toshiba Recovery disk

  Using the disk recovery works up until the point when the system starts up his game.
  I turn on the computer to configure the pc. The system will not complete the setting to the top. I either get a message unexpected problem and the pc tries once again, or I get the BSOD.

  Help!

  Hello

  What model of laptop do you have?
  Have you used the recovery disc in the past with success?
  Have you updated something on your laptop (RAM, HDD)?

• Satellite L755 - how to return to Windows 7 using the HDD Recovery folder

  Hello
  are how you today

  I own a toshiba Satellite L755.
  I have recently upgraded to windows 7 to windows 8, and now I do not have windows 8. I want to go back to windows 7.

  Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB.

  What I need is to know if its possible and if you can you explain to me how its done.

  I searched the Web for an answer for tha last 4 hours and I thank you

  > Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB

  A lot of people said you can use HARD drive recovery in order to put the system back to factory settings.
  This true s but this is possible ONLY if the system has not been modified.

  In case you have changed the system, you could go back to the factory settings using the recovery disk!
  Recovery disk may be created using the preinstalled tool called Toshiba Recovery Media Creator.

  Have you created this disc in the past!