cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

Similar Questions

• Cannot use the webcam in hp Omni200 all in one PC

  I have hp omni200 5320il PC AiO... but am unable to use the webcam... Do I have to install drivers?

  Sarbjas1726,

  I want to access the BIOS and check to see if you can reset it.

  1. turn off the computer

  2. as soon as you turn on the computer repeatedly press the F10 key

  3. If you should drive in the BIOS configuration screen

  4. once he look down, lower-right, angle and you will see a guide that will show you what each key

  5. If you see the keys F5 or F9 to load default press the corresponding key

  6. then agree to the prompt that is displayed

  7. Press F10 to save and exit

  If you are able to do so, test to our webcam once return you to the main screen.

  Please answer as soon as possible.

  Thank you

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Cannot use the webcam on my Satellite Pro A200

  I have the Satellite Pro A200 series.

  My warranty (with clips) runs out on August 7. I had probs with my webcam since I bought this laptop two years ago. I keep says it's a matter of 'software' and not covered by the warranty. I did everything what I said to do... reformatted the hard drive three times, etc., etc. In any case... I use only this laptop when I go... I checked the other day and that's the problem, now, I recovered it. It works, I can see on the webcam, but no one can see me.

  I get this message that says "turn on camera"... but there is no way to turn it on and just what I do does not work. Is it not now a HARDWARE problem, with a built-in webcam If the camera does not illuminate? So it seems Staples should look like it. I'm back this week for another chance with them.

  But does anyone have any suggestions?
  Thank you.

  Try this

  * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
  * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
  * Update your e-mail software (MSN/Yahoo Messenger, etc...)
  * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
  * Try to close the bar Assistant camera on the left side of the office.
  * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

  If it still does not work, then get an ASP to fix it.

• Users on the network cannot use the files after upgrade to Windows 10

  When I switch to win 10 people on the network cannot use the files on my computer

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1 is this computer connected to a network domain or home?

  2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

  In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

  Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.

• Cannot use the webcam on my Satellite A300

  Hello

  I installed Windows 7 Home premium in my laptop (windows Vista there) and since I can't use my webcam.

  It does not appear in Device Manager and I have install and uninstall the drivers of many times but whenever I see the message that says that the camera is either disconnected or destroyed and restart the computer or the camera.

  Is there a way to fix this?
  Thanks in advance...

  My laptop is Satellite A300-20W with PSAGCE-09N00DGE model number and the serial number 29353297Q

  I have the Satellite A300 too with two hard drives inside. Second I ve installed Win7 32 bit and the webcam works perfectly so I m just really wondering what the problem may be.

  You are 100% sure that the webcam works properly with the original Vista recovery image?

• A satellite - cannot use the webcam - in use by another program?

  Sometimes a reboot works but not very often.

  The camera assistance software says "in use by another program.
  How can I find the other program so I can stop it?
  I already rebooted the software nothing works.

  Reg

  Hello

  The webcam software load automatically at the beginning of the windows to start the procedure. The program mentioned is perhaps the assistant webcam software.
  You can disable this automatic startup in msconfig.
  Type in RUN-> msconfig, go to the Startup tab and disable the webcam software.
  This prevents the start software.

  On the other hand, it could be another tool like Skype, MSN messenger or similar

• Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

  Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

  I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

  Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

  I just want to be able to talk to my grandchildren...

  Thanks in advance,
  Sue

  Hello

  He is a Canadian for Toshiba laptop model.
  Please see the Toshiba Canada Web site to get the right webcam software:

  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

  Welcome them

• Cannot use the CD recovery 2 - where to buy one?

  Hello
  Cannot get the 2nd cd running returns me an error and stop the installation, how can I get a copy of the cd?

  Hello

  The recovery CD can be ordered from the Toshiba authorised service provider in your country.

  PS: this has been asked several times, and first of all, you must use the search option before poting issues!

• Satellite A300-1EG - cannot use the command buttons (play, stop) Win XP

  Hello.

  I have a problem with my Toshiba A300-1EG with good software Toshiba Control Center for Win XP, because I do not know how to import a brightened sense Key (PLAY, STOP, FORWARD, BACK).

  Toshiba offers a poor software on own site.
  I can change only 2 buttons (SOUND ON / OFF and ON AUDIO PLAYER).

  Help!
  PS. Sorry for my English

  Hello

  The play, pause, stop buttons and following can not be changed!
  You can use it with Windows Media Player or WinAmp (if you enable the option in Winamp).

  See you soon

• Cannot use the Webcam Microphone

  I use Lunbuntu 14.04 LTS 64 bit and I have a Logitech webcam C170. When I do a test call there is no sound at all. I have check that PulseAudio configuration but doesn't ' nt seem to find any problem in the framework. It happens when fresh installed. Only after that I have install VLC media player, the problem to occur. Appreciate those who help.

  After you have installed Skype 4.3 the problem has been resolved. Thank you!

• Cannot use the webcam using Skype

  Original title: Webcam vs. driver problem

  "Webcam test site that has English and Spanish fashion, why my webcam works on Spanish test but English test fails? The camera works, of course, it must be the disk I got with the camera.  I get the voice of Skype contact, but I don't get Visual contact of Skype. I'm not Spanish and there is nothing Spanish downloaded into my computer. Any information will be greatly appreciated. Thank you, GVautour.

  The name of the product: Installshield file Setup.exe VO: 16.0 size 7.34 MB request UVC Driver - V2.79 - 20110902 7520 KB SXJ 14/15 f / #2.0

  Hi GVautour,

  Sorry for the late reply.

  According to the characteristics of the model number of your Acer computer, it seems that your computer does not have a built-in webcam.

  If you use an external device, you can visit the web camera manufacturer's Web site and install the latest driver on your computer.

  If you are unable to find the appropriate link, you can get back to us with the web camera brand and model number.

  Thank you.

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

• How to make a video DVD of myself I use the webcam for laptop?

  How to make a video DVD of myself I use the webcam for laptop? I never did a video before, and I am a teacher who wants to put my sessions on DVD now. How and what do I do?
  Thanks in advance.

  Hi Sdashe,

  You need to browse for some third-party applications that could support the web cam video, and you can use windows media center media player to burn DVD.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye