Canon CanoScan 8400F. No driver available.

Similar Questions

• Scanner CanoScan 8400F cannot find the WIA driver in Win7 x 64

  Scanner CanoScan 8400F was working on win7 x 64 Home Premium Office.

  I use it every month. Last month it worked fine. Now stopped working - get message saying cannot find WIA driver. WIA service stisvc runs under services.

  I tried driver/software updates from Canon support - no help.

  Scanner works on laptop with win7 x 64 Professional with updated drivers/software.

  I think that the scanner is not serious, that desktop usb ports are in agreement, that support of Canon software is correct.

  What does not work in the operating system? Thank you.

  Pete

  PS. I've referenced the Community issue of MS at the following address, but cannot stop stisvc service to restart.

  Question

  trevor_914 asked on

  IAM having a problem set up a CanoScan 8400F scanner in Windows 7 (x 64). I get a message that I need a WIA driver. I can't find it on the Canon website. Help, please.

  I don't know what is a WIA driver. I have download3ed the driver Windows 7 (x 64) of the website of Canon, but the doews still scan does not work.
  • All the answers (1)
  

  Found this helpful 0

  Arya S Asok answered the

  Star of the community

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Method 1:
  You can download the firmware and the driver on the manufacturer's Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Method 2:
  You can try the following steps and check.
  a. go to Start and type Services.msc in search bar.
  b. search for WIA in the window and Double click and set it to started , if it is not.

  You can contact Canon support for assistance:

  http://www.USA.Canon.com/Cusa/support

  If you are always faced with the question, please respond with more information, and we will be happy to help you

  Hi Pete,.

  Were there any changes made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest to uninstall the drivers for the device and then reinstall it by downloading manually from the Web site:

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Uninstall / reinstall the drivers scanner

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=39107

  Method 3:

  See the articles and check if that helps:

  Start the Service of WIA (Windows Image Acquisition) or Stimon

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=23117

• Update OS 10.9 is not compatible with Canon iPrisma 6000 and driver not available from Canon support

  How can I install a driver for my printer Canon with OS 10.9 Mavericks?

  Printer is a Canon iPrisma6000 and download driver is not on the list of printers available Apple

  Thank you

  Linda

  You can't install a driver if you do not have one that works. Have you asked Canon technical support?

• Canon LiDE 700F scanner driver for OS10.11

  Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized.

  I can't find a new driver for OS10.11 on Canon website.

  Any advice?

  Hi Alan_20,

  I understand that you are looking to get your Canon scanner to work with your Mac after upgrade to El Capitan. According to our records, there is software available for this device. It may help to check the software updates (via the Apple menu) before you connect your scanner.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device.

  Canon CanoScan LiDE 700F *.

  4.1.0a

  S

  Printer and scanner software available for download for your Mac
  https://support.Apple.com/en-us/HT201465

  If you are still unable to get your Mac to recognize your scanner, the next step would be to reset the printing of your Mac system.

  Mac OS X: how to reset the printing system
  https://support.Apple.com/en-us/HT201539

  See you soon!

• CanoScan 8400F drivers

  My CanoScan 8400F worked fine with Windows XP however, even though I checked if it was compatible with Windows 7, it was, and I downloaded the drivers, nothing has worked. Lost my original CD set. All the answers?

  Hi clip314,

  ·         What happens when you try to use the Scan Canon 8400F?

  ·         Were you able to install the drivers?

  Yes Scan Canon 8400F is compatible with windows 7. Link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20CanoScan%208400F%20USB%20Scanner&v=Canon&uid=9554A006&pf=0&pi=9&c=Printers%20%26%20Scanners&sc=Scanners&os=64-bit

  You can download driver for Windows 7 from the following link: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=10242

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't find Canon, (canoscan LIDE25) on my list of scanners

  I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.

  also I have more Moose record for the scanner

  It worked before this computor, until I turned power off the POWER for a week then he's on vacation.

  I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.

  also I have more Moose record for the scanner

  It worked before this computor, until I turned power off the POWER for a week then he's on vacation.

  List of scanners.  Where are you looking?

  What problem you have download the driver or software of http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware

• Canon CanoScan N650U/656U/12200 Scanner

  Anyone know how I can get my scanner Canon CanoScan N650U to work with Windows Vista Home Basic? I reinstalled the software and did a search for drivers all without success.
  Any help would be appreciated.

  Thank you

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=6858

  Read the link above and Select what you want drivers for operating system .

  There are No. Vista drivers available for your scanner model.

  Can written drivers for its products, not Microsoft.

  Time for another Scanner.

  See you soon. Mick Murphy - Microsoft partner

• Canon CanoScan 4400F Scanner USB

  I have a 64-bit computer and my Canoscan 4400F drivers are not compatible.  Where and how can I download them

  The Canon site us has drivers available for Windows 7 64 bit - see the link: CanoScan 4400F.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC

  First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000.  I have just isn't helping me with that.  I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it.  Please, do not assume I know something just because it can be public knowledge.  Thank you for understanding my situation!

  New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router.  Wired to the router, it is a PC with a USB attached printer Canon IP4000.  This printer has worked without problem with this PC for years.  Add the laptop.  Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer.  On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '.  This does nothing to solve the problem.  Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon.  Guess what? -There is no, zero, nada, stupid ".inf" file in there!  I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk.  And the same is true when you try to add the printer to the laptop - not to point to .inf file.  Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me.  The printer must be attached to the PC.  Is there anyone out there who can help me solve this dilemma?  Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process.  Rest assured that I appreciate sincerely any help you can give me.  Thanks in advance!

  Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver.  The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol.  You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.

  This is a Ko for incompatible drivers when connecting XP to NT4.  Replace your server / client configuration, but it's the same process.  Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• How can I get Canon CanoScan N676U Scanner to work in Windows 8?

  How my old Canon CanoScan N676U Scanner can work under windows 8?

  Hello

  The scanner can run on a computer that Windows 8 is there is compatible drivers from the hardware manufacturer. The manufacturer of the printer is responsible for creating compatible drivers.

  You can access the canon website to check if there are compatible drivers Windows 8.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n676u

  Refer to this article to know how to install a printer.

  Install a printer: http://windows.microsoft.com/en-us/windows/install-printer#install-printer=windows-8

  In addition, if there are drivers for Windows 7 you can install the driver in Windows 7 compatibility mode to check if that helps.

  Make the programs more compatible with this version of Windows: http://windows.microsoft.com/en-us/windows-8/older-programs-compatible-version-windows

  Response with the State of the question and we will be happy to offer you our help.

• After the installation of El Capitan (Canon 4400F) scanner my driver fails

  After the installation of El Capitan (Canon 4400F) scanner my driver fails. Now it's a 6 lb paper weight. Tried to reinstall the Canon software and downlading new from Canon, but nothing.

  First contact Canon for a possible upgrade.

  Then try to use the printers and Scanners pane in the system preferences application to see if it will recognize your scanner. Many current scanners is recognized and you can scan with the application overview.

  If none of these help to look into Hamrick VueScan software. I use Vuewscan with my is further supported the scanner Nikon 4000ED.

  http://www.Hamrick.com

• Link-5 dongle no driver available for Win 7 Pro 64-bit

  Bought an Elite v2 Wireless keyboard that comes with a dongle to Link-5.

  The keyboard is listed as compatible with Win XP, 7, Vista, 8. But when the link-5 dongle is connected to my EliteBook 8470w windows reports that could not be not installed, no driver available. It appears in the device under 'Other devices' Manager with a warning icon.

  The product help said that no driver is necessary. The laptop is fully patched and running Windows 7 Pro and clearly needs a driver. I have confirmed that all the elements in the keyboard and HID a current drivers Device Manager, but still the dongle is not installed.

  Finally reinstalled all Drivers USB Intel and the keyboard has been recognized.

• Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan

  Using my scanner USB Canon CanoScan LIDE 200 throughout the years that

  camera seems to no longer work after upgrading to El Capitan.

  The USB device ID is:

  Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200

  
  

  What can I do to re - activate this device?

  Thanks for any help!

  Greetings

  ULI, DF4IAH

  Try VueScan http://www.hamrick.com/

• Het expensive Canon CanoScan Lide 60 moet ik een toepassing maken Hoe dat works

  IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?

  IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?

  Check with your manual Canon CanoScan Lide 60. Search, address, telephone number or Web site where you can get technical support.
  If you don't, here is a link where you can start clicking where you are and it will lead you to the site of the Canon Support in your country.

  Neem contact op put uw in Canon CanoScan Lide 60. Kijk voor het adres waar u technische support location site number.
  ALS I niet vinden good, yesterday is een link waar I moet door start you will op waar u bent het zal leiden tot een van uw support site Earth Canon u.

  http://www.Canon.com/support/