Canon EF 400/5.6 lens profile

Similar Questions

• Where can I find the lens for my Canon mount Rokinon 14 mm lens profile?

  I'm looking for the profile of the lens of a 14 mm Rokinon lens mount Canon.  I use an iMac running OS X El Capitan and Lightroom CC 10.1.1.

  Jean ndiaye says:

  I'll try to find where the Downloader placed the profile and then move to... users (subfolder?) files.

  Adobe Lens profile Downloader will automatically place the profile of lenses to the location of the user folder. On my Windows 7 system, it installs the lens here profiles:

  C:\Users\[your username]\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0\Downloaded

  On a Mac system they should be installed here:

  Macintosh HD / users / [username] / Library / Application Support / Adobe / CameraRaw / LensProfiles /.

  In the profile panel, select 'Make' > 'Canon' and then look in the 'Model' list entry "Samyang 14 mm F2.8. You may need to scroll through the list by using the small arrow at the bottom of the list to see.

  

• Canon EF-S 18-135mm f/3.5-5.6 IS Lens profile Correction STM

  I'm relatively new to Lightroom and have not yet found the answer to my question in the forums. I use a Canon EF-S 18-135mm f/3.5-5.6 lens of STM IS, but the correction lens profile is not available in the list in my version of Lightroom (2015.6).

  Can someone tell (1) me How to download the profileand (2), help me in creating the profile manually? I need also to the EF 50 mm f/1.8 VTS, if possible! Thanks in advance!

  

  

  These lens profiles already exist, but lens profiles correspond to raw files (.) CR2 for your camera brand), only in general, including for the two lenses you ask about.  Here are some of the profiles that you see when you select a CR2 file:

  

• Adobe Lens profile Downloader does not

  I wanted to find a profile of lenses for the new Canon 24 mm T/S lenses. I downloaded the Lens profile Downloader several times from several sources, but get the same error message every time. Anyone know of a solution?

  You mentioned that you have downloaded the ALPD from several sources.

  Have you downloaded from the sources official below?

  Adobe - Adobe Lens profile Downloader: for Macintosh: Adobe Lens profile Downloader 1.0.1

  Adobe - Adobe Lens profile Downloader: for Windows: Adobe Lens profile Downloader 1.0.1

• Lr5 don't auto not fill my lens profile

  (Please move this question in the appropriate forum if it is not correct)

  I was able to insert 2 profiles of lenses in Lr 5.7.1 before and they worked perfectly as they were filled in the lens corrections Panel automatically

  However, I recently had to reinstall windows and even if I have the profile of a lens works well (Canon EF 50 mm f/1.8 VTS) - my other lens is not - I need to select each time instead of it being automatic fill.

  Can I have it please the location of the folder to save 10 home 64 bit where we want to insert the lens profiles so that they are auto populated in the lens correction Panel?

  I have currently here

  Flame33 wrote:

  However, I recently had to reinstall windows, and though I have the profile of a lens works well (Canon EF 50 mm f/1.8 VTS) - my other lens is not - I need to select each time instead of be auto populated.

  Select the correct lens profile and then click the down arrow next to "Setup" and select 'Save new lens profile by default is'. The new lens profile should now be used automatically.

  Profile of lenses Sigma the BTW - is already included in LR 5.7. You should not need to add a lens user profile for that lens. EDIT: Sorry for both these lens profiles are included in LR 6.1.1

  Lens profile Support list Camera Raw Lightroom

  

• How do you get custom default settings to enable lens profile corrections automatically when importing?

  I created default settings of serial number for my Canon Mark III 1ds include corrections of lens profile enabled.  Then, I created a user pre-configured with these corrections to default value.  Then I imported a folder of RAW images taken with the same camera Canon with the user checked under import profile.  When I switch to the module development and check the lens Corrections Panel, I see that even if it is verified for each file, the real model and profile are not met.

  Is this a bug or I forget something when you import?  I understand that in LR 4, you can apply specific profiles of lens and camera serial numbers camera calibration (too much noise reduction etc.).

  MacPro 2.8 Ghz Quad - Core Intel Xeon with 16 GB of ram running OS x 10.7.2.

  Thank you.  I chose to leave the ISO unchecked so that images you lens corrections automatically based on serial No.  I would be a nice feature, as well, to apply noise reduction to a specified user ISO target number, that is to say 1000 or more.

• Where can find lens profile correction for EF 17-35 f/2. 8 the goal using ACR 6.2?

  Using Photoshop CS5 Extended on iMac 10.6.4.

  I work with wedding photos taken by a friend, but I can't find the profiles of correction lens for Canon EOS 20 d or the EF 17-35 f/2. 8 the goal. When I search online, he said simply «no profiles found online» Is there a download for old profiles of goal? I checked and I'm using ACR 6.2. I don't have the camera so there is no way to take test shots to create my own profile. But it should not be an available profile; the camera is not old?

  I don't know why you keep referring the 20 d. As long as the crop factor is the same than your 20 d model camera is not serious. If the lens profile on any Canon camera with a 1.6 crop factor, it works perfectly with your 20 d. However, as noted above, the goal didn't has not been profiled by Adobe for any camera model and it seems that no one in the community of users has created a no more.

  FWIW, I wouldn't hold my breath waiting for someone else to create a. Since your Rebel XSi has a 1.6 crop factor, you can use it to create your own profile.

• I want to add lens profiles to lightroom6. How should I proceed. MP-E 65, TS-E 24mm TS - E 90mm?

  In Lightroom 6 can chose a lens profile correction.  Unfortunately, I have 3 lenses that do not have a correction of the predetermined goal.  These lenses are Macro MP - E 65 and the original version of the TS-E 24mm TS-E 90 mm.

  Once you get these profiles, how to add them to the list?

  You can use the free tool Adobe Lens profile Creator to create profiles of lenses for less common to work in Lightroom and Photoshop/ACR lenses?

  If Adobe does not already, it's the only way to get a profile.

• Lens profile creator table: where can I download?

  Hi all

  There is almost nothing available for Sony A Mount lenses (in particular the Minolta glass I use a lot), I need to create my own lens profiles. I see some tutorials for this using a graphic checkerboard, but no source for getting the card or at least a PDF, etc. that I can myself out. If I have to, I can take the specifications for the square size and spacing and make one myself. If anyone has a source of the graph, or said the plug, I would appreciate it a lot.

  Steve S.

  Try-

  How to test your goal. explora

• Lightroom 6.6.1 can't find the right lens profile more

  Hello

  I have updated to Lightroom to the latest version, of camera raw 9.6 6.6.1 and now I have the problem that lightroom does not find the correct lens profile more.

  I use the same equipment and workflow as before. Even if I select the profile of lens manually, it doesn't have the right profile, but when I check an older import some weeks ago, selected and used Lightroom the right profile, which is located on the old selectable photos!

  Material used:

  Nikon D750

  Nikon 24-120/4

  Tamron 70-200/2.8

  Windows 8.1

  Any ideas?

  Some current problems?

  Kin regards,

  Martin

  Two of these lens profiles are integrated with LR. This means that you manually select them and you do not put a checkmark in the optical Correction area.

  

  Then uncheck the option for corrections to activate the profile. you will then see a box of low red described "applied objective integrated profile.

  Of course, you can make the correction manually if you wish.

• Correction of the lens profile in Lightroom/Photoshop

  I am fairly new to Lightroom and Photoshop, so forgive what may be very novice questions about the correction of the lens.  I've walked these tips to help, but you have not yet found information that solved the problem exactly.

  I use Lightroom CC and CC of Photoshop (running on a Mac).  I use a Nikon D750 and the objective in question is a Nikkor 24-120 f/4 VRII.  For JPEG images in question, I had tile control off in camera in order to avoid double fixing the LR/PS issue (and really have been dissatisfied correction in camera).

  Like many other people have asked about, I have some JPEG files that I want to apply the correction lens profile in LR, but none exist for that lens in JPEG.  I tried the steps that a lot of people have suggested in many forums (i.e., copy of the RAW profile which is located in the folder/Library/Application Support / Adobe / Camera Raw /..., to change all the "stCamera:CameraRawProfile ="True"' to 'False', then copy the file in the same folder and restart).  I tried to locate the new profile of lens using LR and Camera Raw in Photoshop.  I closed the program, restarted, but nothing seems to work.

  Because it did not work, I got rid of the new lens profile I copied and went in Photoshop, using the "Correction of the lens" option in the "Filters" menu (but not in Camera Raw because it does not work).  In the filter, it recognizes the lens and allowed me to make the correction of "thumbnail".

  So my questions are:

  (1) is the method of copy/text change to adapt RAW lens profile does not work for LR CC or is there another text in the file LCP to be changed to make it work? Don't know what I'm doing wrong.
  (2) apart from the inefficiency of having re - import the Photoshop file to LR are all the problems to fix the way I did it using the lens correction filter in PS?  I couldn't find any discussion who suggested doing it this way, so it was not clear to me if there was a reason to not do it instead.

  Any help is greatly appreciated.

  Could not load profile lenses looks like it would be a problem.  I wonder if your text editor removed line breaks or add or change the encoding to something different.  You could re-edit of true-false and see if things work better.  If I change a LCP on Windows I use instead of Wordpad Notepad because Notepad keeps the characters at end of line and encoding.

  The text you see list of LR may not ProfileName it can be the name of the goal or nice name for a lens or something else.  You can change the description read by the man to have a different version: v2a. 2 b v, v 2 c, etc, then you can say that is actually used.

  Or, if this description is replicated for each entry profile, then you might need to change not only one.

• Fujifilm x 10 lens profile

  Hello

  I start with LR 6 and I blocked for the correction of the objective for the Fujifilm X 10, but I can't found. Could someone give me help?

  For X 10 lens corrections are written to the file the camera raw and Adobe uses only those, so no external profile must be specified.  If you have LR 6/2015, and uncheck the enable lens profile correction, you will see an info bubble that says a built-in profile is used, and if you click on that it specifically tells you what corrections have been applied.  If you have an earlier version of LR, corrections are always be applied, just no information about them is displayed.  Here's what 9.4 ACR, which is the same as LR 6.4 and LR CC 2015.4 raw conversion engine, shows for the X 10 corrections of the goal:

  

• Adobe Lens profile Creator for Windows - accidents with DNG and Windows 10 files

  I have trtied to a profile for my Bower 14 mm F2.8, but each time the Adobe Lens profile Creator for Windows crashes and says out of memory

  What?

  A few things to try.

  1. click on the image with the warning icon (triangle).

  2. on the Calibration tab, uncheck the box model Chromatic Aberration

  3. on the Advanced tab, confirm or set rectilinear lens model on three parameters radial distortion

  4. on the Advanced tab, confirm or set the main Point to the best estimate

  To the point #1, you can remove/replace this image. It is possible that the detection of the grid is a failure due to the insufficient image exposure or sharpening.

  To article #2, correction of chromatic aberration is now handled by eliminating Chromatic Aberration on the color of lens corrections tab. CA data in the profile you generate will be ignored.

  -Chris

• The Lightroom for Samsung NX lens profile support [was: Samsung NX!]

  Wann gibt're für die neuen Samsung NX objectives 2 16-50/2.8 50-150 2.8 und ein Lensprofil!

  Hi hans peterm,

  These lens profiles have been added in Lightroom version 4.0.

  Refer to this article: lens profile Support list Camera Raw Lightroom

  

• Default camera lens profile

  Is it possible to adjust your camera profile lens to show only what you have rather than having to pick up the lens you have every time?

  Hi AWDeagleTSi,

  You can set your default lens profile by following the steps below:

  • Choose your profile for images
  • Click the drop-down next to configuration menu and choose 'save new lens profile Defaults.
  • Go to any other image and choose 'default' in the menu configuration menu and it should apply the profile of the desired objective.

  

  Kind regards

  Claes