Default camera lens profile

Similar Questions

• Camera lens profiles

  I have several questions about boxes and objectives in LR 2015.6 profiles first 9.6:

  1. on my laptop (Mac OS 10.10.5) I see no profile under "Embedded" in the LR camera calibration Panel. How can I get that back?

  2. under the terms of correction to activate the profile in the LR develop Module, it does not show Sony RX100iii even if it is seems to be listed as being supported by Adobe. Why is this?

  3. a profile is available for Rokinon 12 mm fisheye f/2.8?

  Thank you

  Hi Eric,.

  "Embedded" means generally that you change a JPEG image. Camera matching profiles are only for raw files.

  The RX100 MKIII has built-in lens corrections. There should be an information icon in the pane of lens Corrections you can click on that will tell you what corrections are applied automatically. But even once, it only works for raw files. This camera JPEG images should already have the corrections applied by the camera, although it may depend on the specific camera settings (I don't remember offhand).

  Profile 12mm f/2.8 ED AS NCS Fisheye Rokinon support has been added in ACR 9.4/LR 6.4.

  Kind regards

  -Chris

• How do you get custom default settings to enable lens profile corrections automatically when importing?

  I created default settings of serial number for my Canon Mark III 1ds include corrections of lens profile enabled.  Then, I created a user pre-configured with these corrections to default value.  Then I imported a folder of RAW images taken with the same camera Canon with the user checked under import profile.  When I switch to the module development and check the lens Corrections Panel, I see that even if it is verified for each file, the real model and profile are not met.

  Is this a bug or I forget something when you import?  I understand that in LR 4, you can apply specific profiles of lens and camera serial numbers camera calibration (too much noise reduction etc.).

  MacPro 2.8 Ghz Quad - Core Intel Xeon with 16 GB of ram running OS x 10.7.2.

  Thank you.  I chose to leave the ISO unchecked so that images you lens corrections automatically based on serial No.  I would be a nice feature, as well, to apply noise reduction to a specified user ISO target number, that is to say 1000 or more.

• How to apply the lens profile automatically by default?

  Is it possible to apply a profile of lenses automatically when an image is imported?  Or have the default to enable Corrections profile box to selected in the develop Module.

  Thxs

  Colin

  Define the default settings from LR to use automatic or default lens profile area and LR should match the right lens with the right profile.

  You don't want to specify a specific objective in the default values of LR, because default values are by camera, no camera-lens-combo.

  If you have a specific objective which is not automatically get selected (that's what happens with I use a focal length multiplier), then you will need to manually set by filtering by the lens in the library, and by applying a preset that sets the profile of lens to something specific with your own custom settings, or at least that's what I do.

• Develop preset continues to choose the calibration of default camera profile

  Hi, for some reason, whenever I chaque fois que je choisis choose a develop preset that does not have a specified camera calibration profile (it should be and used to be "Caméra Standard").  He would choose the first profile in the list instead of "Caméra Standard".

  «I tried to put this by accessing the default develop menu "settings" and clicked on the 'Restore Adobe Default Settings' and "Update to current settings" with selected "Camera Standard".»  Which no correction of the problem.

  Does anyone have an idea how to solve this problem?

  Thank you very much in advance.

  -Daniel

  dingster1 wrote:

  Hi, for some reason, whenever I chaque fois que je choisis choose a develop preset that does not have a specified camera calibration profile (it should be and used to be "Caméra Standard").  He would choose the first profile in the list instead of "Caméra Standard".

  You try to use the Standard camera or Adobe Standard profile? The issue of Nikon D810 in LR 6/CC is with the Adobe Standard profile... it is missing after the day.1

  Adobe Photoshop Lightroom Help | Display pictures of Nikon D810 with different colors in Lightroom and Camera Raw 9.1 6.1

  You should be able to use the Standard profile camera as your default develop settings or use it in a "Preset" without any problem. Only images or presets that use the Adobe Standard profile are affected and show the profile flat camera after the LR 6/CC.1 update.

• Camera Raw 7 cannot find the camera / lens correction profiles.

  Anyone experienced the same or has a solution? They used to be here, that happened after reinstalling photoshop CS6

  

  'Geen' = None

  ! "Cannot find fitting lens profile automatically.

  Thank you!

  Found!

  Download and install the latest DNG Converter did the trick

• Lr5 don't auto not fill my lens profile

  (Please move this question in the appropriate forum if it is not correct)

  I was able to insert 2 profiles of lenses in Lr 5.7.1 before and they worked perfectly as they were filled in the lens corrections Panel automatically

  However, I recently had to reinstall windows and even if I have the profile of a lens works well (Canon EF 50 mm f/1.8 VTS) - my other lens is not - I need to select each time instead of it being automatic fill.

  Can I have it please the location of the folder to save 10 home 64 bit where we want to insert the lens profiles so that they are auto populated in the lens correction Panel?

  I have currently here

  Flame33 wrote:

  However, I recently had to reinstall windows, and though I have the profile of a lens works well (Canon EF 50 mm f/1.8 VTS) - my other lens is not - I need to select each time instead of be auto populated.

  Select the correct lens profile and then click the down arrow next to "Setup" and select 'Save new lens profile by default is'. The new lens profile should now be used automatically.

  Profile of lenses Sigma the BTW - is already included in LR 5.7. You should not need to add a lens user profile for that lens. EDIT: Sorry for both these lens profiles are included in LR 6.1.1

  Lens profile Support list Camera Raw Lightroom

  

• Canon EF-S 18-135mm f/3.5-5.6 IS Lens profile Correction STM

  I'm relatively new to Lightroom and have not yet found the answer to my question in the forums. I use a Canon EF-S 18-135mm f/3.5-5.6 lens of STM IS, but the correction lens profile is not available in the list in my version of Lightroom (2015.6).

  Can someone tell (1) me How to download the profileand (2), help me in creating the profile manually? I need also to the EF 50 mm f/1.8 VTS, if possible! Thanks in advance!

  

  

  These lens profiles already exist, but lens profiles correspond to raw files (.) CR2 for your camera brand), only in general, including for the two lenses you ask about.  Here are some of the profiles that you see when you select a CR2 file:

  

• Lightroom 6.6.1 can't find the right lens profile more

  Hello

  I have updated to Lightroom to the latest version, of camera raw 9.6 6.6.1 and now I have the problem that lightroom does not find the correct lens profile more.

  I use the same equipment and workflow as before. Even if I select the profile of lens manually, it doesn't have the right profile, but when I check an older import some weeks ago, selected and used Lightroom the right profile, which is located on the old selectable photos!

  Material used:

  Nikon D750

  Nikon 24-120/4

  Tamron 70-200/2.8

  Windows 8.1

  Any ideas?

  Some current problems?

  Kin regards,

  Martin

  Two of these lens profiles are integrated with LR. This means that you manually select them and you do not put a checkmark in the optical Correction area.

  

  Then uncheck the option for corrections to activate the profile. you will then see a box of low red described "applied objective integrated profile.

  Of course, you can make the correction manually if you wish.

• Correction of the lens profile in Lightroom/Photoshop

  I am fairly new to Lightroom and Photoshop, so forgive what may be very novice questions about the correction of the lens.  I've walked these tips to help, but you have not yet found information that solved the problem exactly.

  I use Lightroom CC and CC of Photoshop (running on a Mac).  I use a Nikon D750 and the objective in question is a Nikkor 24-120 f/4 VRII.  For JPEG images in question, I had tile control off in camera in order to avoid double fixing the LR/PS issue (and really have been dissatisfied correction in camera).

  Like many other people have asked about, I have some JPEG files that I want to apply the correction lens profile in LR, but none exist for that lens in JPEG.  I tried the steps that a lot of people have suggested in many forums (i.e., copy of the RAW profile which is located in the folder/Library/Application Support / Adobe / Camera Raw /..., to change all the "stCamera:CameraRawProfile ="True"' to 'False', then copy the file in the same folder and restart).  I tried to locate the new profile of lens using LR and Camera Raw in Photoshop.  I closed the program, restarted, but nothing seems to work.

  Because it did not work, I got rid of the new lens profile I copied and went in Photoshop, using the "Correction of the lens" option in the "Filters" menu (but not in Camera Raw because it does not work).  In the filter, it recognizes the lens and allowed me to make the correction of "thumbnail".

  So my questions are:

  (1) is the method of copy/text change to adapt RAW lens profile does not work for LR CC or is there another text in the file LCP to be changed to make it work? Don't know what I'm doing wrong.
  (2) apart from the inefficiency of having re - import the Photoshop file to LR are all the problems to fix the way I did it using the lens correction filter in PS?  I couldn't find any discussion who suggested doing it this way, so it was not clear to me if there was a reason to not do it instead.

  Any help is greatly appreciated.

  Could not load profile lenses looks like it would be a problem.  I wonder if your text editor removed line breaks or add or change the encoding to something different.  You could re-edit of true-false and see if things work better.  If I change a LCP on Windows I use instead of Wordpad Notepad because Notepad keeps the characters at end of line and encoding.

  The text you see list of LR may not ProfileName it can be the name of the goal or nice name for a lens or something else.  You can change the description read by the man to have a different version: v2a. 2 b v, v 2 c, etc, then you can say that is actually used.

  Or, if this description is replicated for each entry profile, then you might need to change not only one.

• Lightroom 6.5 - panasonic lens profiles are missing

  No profile lens Panasonic, everything works fine. What can I do?

  It's a format MFT camera?

  Read here: work with lenses in Adobe Photoshop, Lightroom and Camera Raw profiles

• Fujifilm x 10 lens profile

  Hello

  I start with LR 6 and I blocked for the correction of the objective for the Fujifilm X 10, but I can't found. Could someone give me help?

  For X 10 lens corrections are written to the file the camera raw and Adobe uses only those, so no external profile must be specified.  If you have LR 6/2015, and uncheck the enable lens profile correction, you will see an info bubble that says a built-in profile is used, and if you click on that it specifically tells you what corrections have been applied.  If you have an earlier version of LR, corrections are always be applied, just no information about them is displayed.  Here's what 9.4 ACR, which is the same as LR 6.4 and LR CC 2015.4 raw conversion engine, shows for the X 10 corrections of the goal:

  

• Default camera is not applied to import

  Since the update to LR CC 2015.3 my default camera raw settings are are not applied when importing or recall if I exit and restart LR.  If I create a new, it works up until I stopped.  If I restart and try to import new photos of the exact same camera (Sony A7 RII), it applies to standard flat profile with a standard configuration of Adobe.  Any help would be appreciated.  Appears as a Pushpin, other know this as well?  A preferences file that has been tampered with?  I haven't checked your auto and in prefs didn't he camera specific to specific serial No. or ISO.

  This is a bug specific to Sony cameras, see this report on the official Adobe feedback site: 6.3 Lightroom / Camera Raw 9.3: Broken 'Develop default settings'

• The Lightroom for Samsung NX lens profile support [was: Samsung NX!]

  Wann gibt're für die neuen Samsung NX objectives 2 16-50/2.8 50-150 2.8 und ein Lensprofil!

  Hi hans peterm,

  These lens profiles have been added in Lightroom version 4.0.

  Refer to this article: lens profile Support list Camera Raw Lightroom

  

• It is the download for the LR5 Mac lens profiles

  Used LR5 on a PC since release, this version has my Nikon/camera lens listed. Just installed a new hard copy on a new Mac, this version does not have my loaded profile. Searched the Adobe web site and although in help, my lens is displayed in the list I can't find the download for a Mac. someone help.

  You shoot JPEG or Raw? Several profiles of lenses exist only in the first.  I wonder if it shows only missing because you are looking for with the bad image file type selected.