Canon EOS 400 d/XTi not recognized on Windows 7 Ultimate 64-bit
When I plug my Canon 400 d on Windows 7 64 bit Ultimate N, Windows detects a new device which is indicated under "Devices and printers", "Not specified" as "Digital camera Canon", but it fails to load/install the drivers to make it functional.
Hardware ID are:
USB\VID_04A9 & PID_3110 & REV_0002
USB\VID_04A9 & PID_3110
As mentioned above, you can use Windows Virtual PC. On my Win 7 64 bit, it was already installed. Maybe it was a result of the optional updates of windows I've done. There should be a folder in 'Start-> all programs' near the bottom of the list. Select "Windows XP mode" here. If you do not, just Google for "Windows Virtual PC" and d/load for free on the MS site of. Installation is quite simple. Then start Windows XP virtual session. It will take time to given itself the first time you run, but in the end that it will look and function exactly like Win XP in a window and it will be able to run most, if not all, older programs that do not work under Win 7 including EOS utility. There, you can install the Windows XP drivers for your EOS camera from Canon site. Restart the session Win XP (and not on your computer), connect your camera and on top of the virtual screen XP, you will see the USB pull down. Under USB, you should see Canon digital camera. Select 'home '. If it works, you know that the driver is correctly installed.
Then install your EOS Utility (in your session Virtual PC XP, of course), do the update of the site of Canon, and all features are available. Including the command remotely via the USB port.
PS You can install EOS utility update even if you do not have the original CD. Update is complete installation. It simply checks if EOS utility has never been installed before. And it's just a metter of a coupe of parameters in the registry to trick the it. Google for 'EOS Utility installation' and you can find it.
Good luck!
Tags: Windows
Similar Questions
-
Dear Sir.
I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.
its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)
Please answer soon
Hello:
The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.
You need this driver usb 3 to this ID.
FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe
The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.
That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.
-
EOS 20 d is not compatible with this version of Windows.
"Because this device is not compatible with this version of Windows, and there is no solution for this problem, we recommend that you find another device on the following Web site:
Just bought a new laptop with Windows 7 and now I can't download photos from my camera to my computer. All messages in error (including the Canon Website) say that there is no driver available.
Try the suggestion of third jeff1212 post) in the following link:
http://www.TomsHardware.com/Forum/53065-5-Windows-Vista-Canon-problems
-
Hello
The SD card is not recognized by my laptop on Windows 8.1 (64-bit), even if it does not work on Ubuntu.
I installed the driver from Alcor Micro chip card readerbut still nothing happen when I insert the sd card adapter.
Is there another driver, that I should install?
Thank you.
Download another Realtek USB driver
-
Camera Digital Canon PowerShot A530 5MP is not recognized by Windows 7
I have a new laptop HP dm4t Beats's. He uses Windows 7 Home Premium 64-bit. Software of my Canon Power Shot A530 5MP digital camera does not include Windows 7 compatible and I'm unable to use my computer with my unicameral.
What can I do?
Thank you.
Scott Hanel
[phone number removed]Go to http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a530#DriversAndSoftware and see the options and the FAQ.
-
I have cloud will not install in Windows 7 Ultimate 64 bit
I try to install I have about 50 times (no exaggeration) cloud explains installation problems. I think it's USED WINDOWS INSTALL # 1709? problem. Looks like microsoft cannot fix this installer and it affects all programs, you are trying to install. Occasionally that I can get something to install by changing the compatibility of programs, this problem. I would of course I could understand why microsoft not be honest and solve this problem everyone seems to HAV, he has a BIG problem!
Hello
1. is specific to this particular application question?
2. What is the exact error message?
3 did you changes to the computer, before the show?
Method 1:
Run the fixit and check.
Solve problems with programs that cannot be installed or uninstalled
Method 2:
Perform a clean boot and then try to install the application.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
-
My new Canon 70 d is not recognized by Windows 10 anniversary.
Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.
Plug my 6 d and that it appears in the devices.
Plug my 7 d and it does NOT appear in the devices.
I have two other (not Canon) cameras that work with Windows.
Using the same USB cable for two Canon cameras. Even tried another cable.
I have two new cameras: 6 d and 70 d.
The 6 d is modified and cooled by DS Central.
The 70 d is original.
MacBook Pro with 16 GB of memory running macOS Sierra.
Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.
The 6 d is recognized by the works and EOS Utility 3.
The 70 d is not many EOS Utility 3 or EOS Utility 2.
And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).
-
My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and Gateway laptop with Windows Vista 32 bit operating system. This means plug-and-play is not available or does not so I have to use for my compact flash card reader to transfer pictures. I've already updated the firmware by downloading the upgrade of the Canon website. I tried to turned touble this problem following what is suggested in the Canon Website, and still the problem is not corrected. Thank you.
Hello
Follow the steps mentioned below and check if the problem persists.
Method 1: Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: You can also try to connect the camera to a different port and check if it helps.
Method 3: You can also try changing the normal mode to print/ptp in camera mode where you can print directly from camera by connecting printer directly using the usb cable.
Hope this information helps. -
.mov file extension is not recognized by Windows Media Player
original title; Media Player
When I try and play a movie on my camera which is a Canon I get a message that says this file has an extesión (mov) and is not recognized by windows media player, what should I do to correct this
You (possibly or) missing a codec.
I suggest you only install this codec pack.
http://www.free-codecs.com/download/Vista_Codec_Package.htm
Main Page: click, download Vista Codec Package
Second Page:
Download Vista Codec Package 6.3 first a: 32 bit .zip File
Download Vista Codec Package 6.3 second one: 32-bit .exe file
Download Vista Codec Package 6.3 third one: 64 bit .zip File
Download Vista Codec Package 6.3 fourth one: 64-bit .exe file
This is the free safe and the best package on the web.
He'll play 99% of files, so you will not need to download or use other programs.
You can check here to see what's on your system.
To check: Open Media Player, click Help in the menu, on the Windows Media Player, Technical Support information.
Click here to see if you have 32 or 64 bit:
Control the look of Control Panel, system, under System Type:
-
Stor.e slim not recognized by Windows 8.1
Hello
A Stor.e slim external HARD drive is not recognized in Windows 8.1 (no problem with Windows 7). When it is plugged in, it s shown as a device not recognized. Driver is requested but not found.
Hello
Stor.E Slim external HARD drive is a 2.5 HDD USB 3.0 and 900mA power it requires to work correctly.
I suppose that there is nothing wrong with this HARD drive, but with your laptop.
8/8.1 win requires different drivers and you will probably need to install a suitable driver in order to get the USB ports work correctly (USB 3.0 as well as the driver additional chipset would be also necessary).
-
Description of the problem:
Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.
Steps to recreate:
UEFI:
- Start the PC in diagnosis system UEFI (F2 at the STATION)
- Pane controls
- Optical drive
- Sequential control
- Error: Optical drive not installed.
8.1 Windows (x 64):
- Run Device Manager
- Error: No CD/DVD Drives section.
- Search for new hardware changes nothing.
Relevant system specs:
Mobile: HP Pavilion 15-n023sa (construction of vanilla)
Optical drive: HP DVDRAM gu70n
Steps already taken to solve:
- Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
- Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
- Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
- Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
- Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
- Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.
Notes:
The DVD player is NOT appear in Device Manager, OR in this PC.
The DVD drive is NOT detected by diagnostics system UEFI.
There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.
The DVD player itself, works and has been verified on a different machine.
The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.
-
Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)
Out of warranty by a month!
Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1
The touchscreen still work while the screen is black.
System restarted after the mode 'sleep', in my opinion.
The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.
Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.
When the external monitor, the internal screen is not yet recognized by windows.
When I boot in safe mode, the internal display works fine with of course limited capabilities.
I rebooted on the support site display drivers.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Someone at - he of the clues as to what my happen? Hardware, driver etc?
Can what information I provide?
It is a pretty weird problem with contradictory observations.
(1) screen working in Mode safe but not regular boot. (So not the hardware problem)
(2) display on an external monitor in normal mode. (So, no drivers issue)
Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?
Could you re - open and check that all connections are good?
The Wi - Fi card works well?
I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.
-
Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10
LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.
The "result of software and driver for laserjet 1018' has not failed (new driver)
USB ports active aere
Do I need a new driver for Windows 10?
Is a new availabe driver for Windows 10?
Thank you.
Hello and welcome to the community of HP @Rikkie1,
I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.
Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.
HP print driver printer - install and use the built-in Windows
If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.
I hope this helps and have a nice day.
-
CD/DVD drive not recognized by Windows all of a sudden
The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.
Hi Ranamaska,
You can follow this link & check if the problem persists:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?
Hope the helps of information.
-
Your CD or DVD drive is missing or is not recognized by Windows or other programs
I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?
shanglur,
If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...
Your CD or DVD drive is missing or is not recognized by Windows or other programs
But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.
Rick
Maybe you are looking for
-
Hey all. Photos seems to have migrated in Photos from iPhoto, but all the thumbnails and images are white. I tried: 1. the four repair and rebuild options in iPhoto - iPhoto watch BTW everything correctly. 2 COMMAND/OPTION - Photos of repair. Did no
-
What are the best settings to standard calibration for the XBR65X850C?
What are the best settings to standard calibration for the XBR65X850C?
-
I can't see some videos. the funny thing is that I could see them yesterday on the same web page, butI had audio, the screen appears in green. I updated the computer yesterday and it worked, but still the same problem
-
Sending an address from google maps to 765 does not work
I tried to send an address from my office to my gps. It would not work?
-
Windows smart warning screen to flash Bios application
Hello I have Acer Aspire V5 - 573G and download the BIOS update from the acer site. Operating system is windows 8.1. But when I try to run upgrade from the windows application bios displays this warning. Windows SmartScreen prevented an unrecognized