Canon MXF files and Audio problems

Similar Questions

• Output file WMV - Audio problem

  I'm new to Premiere Elements (9 v), but have produced a very good first DVD.  I wanted to also output as a wmv file.  It took forever for the rendering, but the output had audio problems.  A single audio track was fine, but if I had the narrative on a soundtrack, the soundtrack was not included.  If it was just a soundtrack or a single audio track in a clip, the sound was very good.  I have had no clip with narration or soundtrack on an audio track of the video and my story and audio tapes were all still image clips, but I have a feeling that this is not a problem.  My guess is that render to wmv just took a track audio with the priority being Audio 1, 2, etc., Narration and finally soundtrack.  Is there something that I need to specify to get more than 1 audio or y at - it a problem to v. 9?  Thank you

  Welcome to the forum.

  Just some thoughts:

  WMV is UC both decode and encode. Time is probably the way he is and could be depends on your computer. There are a LOT of current compression.

  Now, regarding Audio, there have been users who have had problems (not unlike yours, but not identical) with export, whereas they had Clips on the narrative and the tracks Audio Soundtrack sets. In many cases, simply move all these Clips to a regular Audio tracks, has cleared up many / most of the questions. It would be the first test that I run - just their lasso and move them to another free Audio track. Test.

  Good luck

  Hunt

• Video and audio problem after upgrade of Sierra.

  After that each OS upgrade that I know it's going to be a few problems, so I wasn't surprised when this happened with Sierra. Most have been quickly resolved by common sense, but I have a biggie that remains. Mainly, but not only, it occurs during playback of videos and translates into a serious attack.

  When you use: -.

  Google Chrome Version 53.0.2785.116 (64-bit);

  When you watch a video, I hear a short hissing sound with a rising intonation (or sometimes 2 these sounds) then the text is added to a search bar (sometimes this text contains the words drawn from what someone says in the video!), or the video play suddenly disappears and a new tab opens and opens a page of Google apps. By clicking on the symbol left back page Apps and re - opens the original video that starts playing from the beginning again.

  This happens also in Chrome when it suffice to read a web page.

  In Safari 10.0 (12602.1.50.0.10)

  When occurs sound even watch videos in Safari 10.0 (12602.1.50.0.10), and the small text boxes appear at the top of the screen for a few moments contains comments such as "Hide this app", or "Undo that" before disappearing again.

  and audio in iTunes 12.5.1.21

  The same thing is happening in iTunes or when playing the iStore clips or songs in my library. The same small text boxes are displayed at the top middle of the screen containing cryptic messages such as "click 308' disappearing quickly. Sometimes the ' find and Replace window appears with more cryptic phrases in ' are are are ' not found! This occurs every 3-4 minutes.

  When you use Pages 6.0, a doc Pages will disappear and will appear in the folder from which it was opened. Or Graphic Converter 8, an image suddenly disappears and will open the Finder.

  I ran Etrecheck that says everything has been "excellent". I ran disk utility: first aid, who said there is corruption, he couldn't fix it and is running in recovery mode. I did, and the glitches always come back.

  Summat is false and I am not enough techno to understand (or maybe even explain it very well).

  Anyone bed this litany has an overview of what happens with a recourse?

  Thank you very much

  Graham

  Sorry, should be added the following: -.

  MacBook Pro (retina, 13 inches, end of 2013, recently upgraded to Mac OS Sierra.

  Processor 2.4 GHz Intel 15 8 GB memory

  Grahan

• Envy 14 update of windows 8 1050ca, graphics and audio problems.

  After the installation of windows 8, my graphics and audio drivers are two no-shows. "This device cannot start.

  I noticed the thread referenced here for this problem of graphics and we tried everything suggested this back and forth so far without success. In General, if compatibility is set to windows 7, as suggested, it never even finished installing. Just, it freezes and sits there indefinitely.

  Is there something else to what can be done? I love this computer, I have always been happy with the HP, but this poor thing is useless for me with no graphics capability sound and only very little while both cards apparently burn simultaneously. I had problems with drivers before, but he has never been much of a dead-end.

  Help? Anyone?

  Solved my problem.

  For those who have a similar problem, this man is a magician:

  http://leshcatlabs.NET/index.php/2012/11/catalyst-12-10-WHQL-unifl-for-amdintel-graphics/ All the features, fully up to date driver.

• Webcam and Audio problems

  I've been using Skype every day and the webcam and the sound worked. I just signed up today and my vidI use Skype every day, and the webcam and the sound worked. I just logged on today and my video and audio does not work. I tried to remove and install Skype, but this does not work either. My webcam does not work, and my laptop is not picking up sounds. I don't know why this is happening. Can someone help me?

  Hi ChristianB4,

  Welcome to the Microsoft community where you can find all the answers related to windows. According to the description, you are facing problems with the audio and video problems with Skype.

  In addition to answering these questions that would help us provide a better solution:

  1. is the Skype-specific question?

  2 have had any changes made to the computer before the question?

  3. What is the brand and model of the computer?

  Try these steps and check:

  Method 1:

  This fixit is automatically diagnose and fix problems with the equipment.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• transfer files and settings problems

  I followed the instructions in the files and Settings Transfer Wizard. Old computer xp home 20 years, new 9 year old xp pro. serial cable installed but computers try to connect to each other (com1 or autodetect) but can't, they just keep trying indefinitely.

  The old computer has an Ethernet (network) card?  If so, get a crossover cable and forget the "serial null-modem cable.

• Sound and Audio problems

  When I start my HP 1000-1433TU Notebook PC sound and Audio stops and becomes unable to play videos. How can I get the proper functioning and stay the work as well as the videos become playable? until now the only option that worked to stop the PC and tuning it back on, but the questions happens again within 10 minutes.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that, you may or may not need to remove and reload the Audio driver for your laptop.

  Kind regards

  DP - K

• fwrite error: try to write 26 bytes of file and the problems

  I'm writing 26 Hex bytes data file using fwrite and I have unknown problems because of which has written 27 bytes

  /////////////////////////////////// Code ///////////////////////////////////////////////////////////////////
  FILE * READ;
  READ = fopen ("DataReceived.dat", 'w'); opening the file for writing

  unsigned char data2send [26] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
          
  data2send [0] = 0xEB; conferment of the data
          
  data2send [1] = 0 x 90; conferment of the data

  data2send [10] = 0x08; / / data assignment
           
  crcsent = calCRC16 (data2send, 24); calculation of 24 bytes CRC and the addition of crc (16 bit) to last two bytes of data
          
  data2send [24] =(crcsent>>8) & 0xFF; Added to the second last octet CRC
          
  data2send [25] = (crcsent & 0xFF);   CRC has added up to the last byte
         
  If (ComWrt (coms, data2send, 26) == 26) / / send data to com port
  {
               
  fwrite (data2send, 1, 26, READ); ===> writing data in the file where there is problem
      
  }
  /////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Production (WRITTEN in the file) should be:

  0xEB 0 X 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0A 0xA1

  Output that I get the file (which is incorrect) and do not do because I've specified 26 bytes to write

  0xEB 0 x 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0D 0x0A 0xA1

  How 0x0D is added to my data, even though I'm only add data Byte 0,1,10,24,25

  When I write 26 bytes then how 27 bytes are written to the file?

  Thanks in advance

  arfaoui

  I can only imagine that the problem may arise from opening the file in text mode and write on it (0x0A) a line break character: the system can automatically add a CR (0x0D) in order to maintain the standard CRLF. Try opening the file in binary mode instead (fopen with "wb" specification).

• His laptop PC and Audio problem

  Hello

  I have a laptop of M6 HP ENVY after I upgrade my PC, there is no sound at all. It shows no speakers or headphones are connected. IDT High Definition Audio CODEC has been disappearing. How can I reinstall it? Could you please help solve my problem. Thank you very much!

  Hi Joyce,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  One time finished, disconnect the power adapter, and then remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Streaming video and audio problems in Win7

  Hello
  I don't know why my computer is suddenly not playing videos with her anymore. I just watched video in the afternoon and evening, he started stuttering video audio, choppy and now he's dead. I tried troubleshooting, an appointment online for help, checked the sound properties, etc., but not luck!
  Does anyone have the same problem? And you have any suggestions to fix it?
  My computer is running on win7 Pro 32 G of RAM, 2 G graphics card.
  Any help and suggestion is appreciated.
  Thank you

  Hi Melburnianz,

  Thanks for posting your query in Microsoft Community.

  The description of your problem, I understand that the videos are choppy and you hear sound formwork.

  I imagine the inconvenience that you are experiencing. I would like to help solve you the problem.

  I would be grateful if you could answer the following questions:

  1. you play online video or videos stored on your hard drive?

  2 what Media Player do you use?

  3. What are the troubleshooting steps you have done?

  4. What is the brand and model of your computer?

  We with reply above information for you help.

  While your answer above information, you can update the graphic card driver, sound card drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also check if there is no update for your computer to the manufacturer's Web site.

  I hope this helps. If the problem persists, or if you have questions related to Windows please get back to us. We are happy to help you.

• Internet connection and Audio problems

  My HP Pavilion Dv7-4009tx Entertainment Notebook PC works perfectly since it was resolved a month ago, he got a new DVD player and has been reset back to the factory setting. It was smooth sailing for a month and then stupidly a problem. I turned on one morning to find he is slow to start and then when he did finally start a note came saying 'failed to connect to A Windows Service' after a quick search on the net I found a solution for this and solved this problem but it has not solved the other two problems I have now.

  

  It is one of the question that I have now, it's funny because my laptop only use the build in speakers. Then I thought maybe because I could find something to fix, but so far nothing has worked.

  

  And the other problem, my Internet connection is non-existent and even after checking on the net he had anything that actually worked.

  Is there really a possible solution to these problems? I can also provide more screen shots if needed, just tell me.

  Note: Ignore the isn't the battery icon, I currently do not have a battery that works.

  Wow, your system is really messed up.

  OK... what I would do is a "reimage" of your system. In other words, reinstall the operating system. Backup your important files on an external device.

  You should be able to perform what is called an "Image system recovery" as mentioned here. Restart the computer and press F8 a bunch of times until a menu will appear (the Advanced Boot Options menu) and select repair your computer. The rest is on this page that I linked. Click "View all" at the bottom of the page linked to learn more.

  Your system must have a HP recovery partition has set up to do this, you can at least go back to square one and have a fresh start.

• . NEF file and metadata problems when you use Nikon D5

  Just got my Nikon D5 five days ago and I have the following problem:

  (1) Lightroom does not recognize the raw (.nef) files created by my Nikon D5. When I try to import into Lightroom, each icon file says that the file is not supported.

  (2) after shooting with my Nikon D5, Lightroom metadata has each goal (all Nikkor) I use listed as unknown goal.

  I use a Macbook Pro computer with MAC software up-to-date. (Mac OS - X El Captain v.10.11.4).

  Lightroom is up-to-date with today ' hui - Lightroom version: 6.5 [1067055].

  Nobody knows where the problem lies - Nikon, Adobe or Apple?

  Thank you

  Julius

  I decided to delete Lightroom and reinstall it.

  Everything's fine now with the reading. NEF files.

  Thanks for your comments.

• Windows cannot access the specified path or file and devices problem

  I am on windows 7 o s a problem facing "windows cannot access specified path or devices" his see on instalation game of the World Cup fifa 2010 file this error see (file thretensed virus). How to fix this problem please help me

  installation file come you from another computer or downloaded from the internet? If so, right click on your setup file > properties > then press on unlock. This method works every time. If this is your problem or not please let me know :-)

• generation new peak file and audio every time I open the CS5.5 project

  Everytime I open this project, it generates the same tip as conforming to the audio file. It's frustrating because it's the same files everytime I open the project. Someone at - he encountered this before?

  

  The film was made through Cineform studio. It has been converted into an AVI to AVCHD file.

  I've heard say that if any type of utility key files, such as Time Machine on MAC, that this can lead to the regeneration of the peak files.

• Cannot open the D800 NAVE 9.4 files in camera raw. Canon CR2 files open without problem.

  No idea why does not open the NEF files? I've updated all the newer versions. Thank you in advance for your help!

  Any chance to download the images from your camera Nikon Transfer?