Output file WMV - Audio problem

Similar Questions

• Canon MXF files and Audio problems

  I recently bought a Canon XF-300 camcorder to use my CS5 Premiere Pro system.

  I guess that the XF-300 would create a huge video file until I turned off the machine.

  Instead, he represents several in MXF 2 GB files and every time I have to start/stop the camcorder a new video file is created.

  And what makes it worse, is that it puts each MXF file in a folder.

  When I turn a long clip there are problems with editing several clip 2 GB as opposed to a clip of 13 GB that I used to get with tape.

  I use the XF utility to only transfer the video files from my CF card on my hard drive.

  Then I perfer to use Pr to concatinate MXF separate files into a single file MP2 wasting a lot of time.

  Is there something I could do with the camcorder of the XF utility to join a large file?

  Also when I put a MXF file a sequence Pr stero audio track that I'm used from a band splits into 2 separate tracks.

  One seems to be mono left and the other right mono.

  When I combine them into an MP2 file, I get a mono soundtrack.

  How do I get stero sound track?

  Francis,

  The manual I have:

  Merge all Clips = merges the flow MXF files in each clip and also merges multiple files selected in a single file.

  Merger of each Clip = merges the flow MXF files in each clip but retains several selected files in a different way.

  With regard to the problem of audio:

  In Premiere Pro CS6, you can set the Audio tracks by default for your stereo import instead of double mono/multi-channel mono media files. I don't know if it was an option in CS5, but I think that it is not.

  In CS6 you do the following:

  1. edit > Preferences > Audio ("' Premiere Pro > Preferences > Audio" Mac ")

  2 under default Audio tracks, change multi-channel Mono Media 'Use the file' in 'Stereo '.

  3 click OK.

  Note that this will not affect already imported clips. This setting affects preferably clip when you import.

  / Roger

• 8 slate Pro audio problem: headphone output

  Hello

  I bought my slate 8 Pro (model 7600US) to replace my Blackberry playbook. It is the great Tablet (screen perfect last Tegra 4 CPU, battery in good condition, good speakers integrated), but after the use of the Tablet for several days, I am surprised by problems with audio quality of the headphone output. I use mainly compressed with headphones (audio books, Netflix, music, etc.), so when I connected my Ultimate Ears Super.Fi 5 Pro (headphones ultra-sensitive 119db/mW, 12 Ohm), I got very sensitive background noise, artifacts and, what is very annoying - variable pitch tones when changing tone based on the activity of the Wi - fi and load CPU, especially on low volume levels.

  So I tried using headphones from Shure (109db, 29 ohms), less sensitive 4ca as KOSS KTXPRO (106db, 60 ohms) with the same results. HP Slate 8 Pro is not powerful enough to Sennheizer 555 (105db, 120 ohms) but I also had the artifacts and noise of not. Finally I tried junk headset $2 and found the sound sounds and tones perfectly acceptable ground level, but the sound quality with these phones is terrible.

  To compare, I tried all my headphones with Nexus 7, Samsung Note 3, IPhone 5 and Playbook without problem.

  I have returned the shelf at the store and replaced it for the new, but I had similar problem.

  Please let know us, what I have to try the third time and replace the Tablet, or it's problem of hardware design, which cannot be resolved. Is it possible, that developers of HP can fix it in software configuration in a future update?

  I understand, this tablet is not an audiophile device, but when the HP Web site indicates to this tablet: "Tuned by Dr. Dre himself, Beats Audio™ allows you to hear the music the way the artist intended.", it must at least provide acceptable audio quality for most listeners. I love HP Tablet a little, but if audio problem cannot be solved, I have to look for another option like Samsung or LG.

  Updated my slate 8 Pro to KitKat 4.4.2 and looks, that his problem slipped.  With this update, noise and less noticeable artifacts, sound quality is acceptable now, even for sensitive headphones.

• Problem steps Recorder error - you have not permissions to system files needed to create the specified output file.

  I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:

  "You don't have permissions of system files needed to create the specified output file.
  If I run the present when logged in as a domain administrator, I can record without problem.  But when logged in as a domain user, I get the error.  I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.
  Everyone knows about this problem?

  Hello Giblits,

  Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Problem in Delphi7, fatal error: could not create output file 'project1.exe.

  Delphi 7, I installed five days ago. I had no problem until today. When I open delphi 7, created a problem and he ran, appeared in the syntax error, and the program may not start:

  Delphi 7 - fatal error: could not create output file 'project1.exe.
  Also I noticed that program saved in projects, each icon has a golden padlock. However, I can open and run any other programs that are not registered in the projects.
  Note: I am the administrator
  What can I do about it?

  Vasilis salvation,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks that you are facing a problem when accessing Delphi7 on your Windows 7 operating system.

  It would be great if you could answer these questions to help you further.

  1. is the question confined with Delphi7?

  2 have you made changes on the computer before this problem?

  Note: If the issue limited only with Delphi7, then I would say to contact the factory for assistance program.

  Please come back with more information on the issue so that we can help you better.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft and we will be happy to help you.

• Audio plays for file .wmv but no video

  WMV files

  When I open a file wmv as an attachment in an e-mail, the audio plays but no video. I have reset the setting by default, but this did not help.

  You will have to perhaps insufficient codecs installed on your computer. Just a heads up, the video files are encoded only according to how it has been taken and the material used. To decode or play some video files / types of video files properly, you will need to install the appropriate codecs. This link might help.

  http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx

  Or you can try to use VLC Player to play videos. http://www.videolan.org/VLC/

• 2015.3 CC - have lost all the file audio problems video / links too

  I've upgraded to 2015.3 this morning.  Started working with a project that was shot entirely with a Panasonic GH2... and have never had any problems with it. Now in 2015.3, the project opens with none of the video on the timeline linked to their respective folders. When I try and make the link... video links and there is a message that tells me the audio isn't there... specifically the message is: the selected file contains audio media used by clip references in one or more sequences. These references to audio clip will be deleted and cannot Ωtre annulΘe. Do you want to continue? OK Cancel of course that I have to cancel, not knowing if the audio will be permanently deleted. Files from the GH2 are .mts files and it is certainly audio when played with a media player. So my question is... is this a problem with the format .mts or it's Adobe. I'm afraid to open another project that has files, .mxf or mp4 and brought them to the point completely dissociated.  Here is a screenshot.  Can I just go back to 2015.2 until find you it?

  

  Dave Speace

  Video DZP

  Core i7 16 GB 64-bit

  If it worked once I deleted all the files in the shared folder. Other problems are: first runs slower, stutters during playback and sometimes freeze clips or audio is not reading... I have to stop playback and restart. Also, string stabilizer would not be made on one of my clips. Should he hold PP6 and try it rendered as a new clip.

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• Problems importing files .wmv in After Effects.

  Hello. I know that there is a question like this, but I can't use any other file format, because:

  Every time I have import or try to play or rub the file (.wmv) in the timeline, it displays an error:

  After effects error: frame of reading of the "D:\" file... error (4) WMV ".

  (86: 2)

  How can I solve this problem? I have the AVCHD camera and I (HD Full HD) video editing in Corel Video Studio. BUT! The file format that BEST is .wmv when I export my films. I did an action movie and I want to add effects in AE, but it shows this error. I CAN'T JUST USE ANOTHER FILE FORMAT. Y at - it anyway how to solve?

  In any case: AE CS5 will support WMV WITHOUT ERRORS?

  Thank you very much.

  I'm going to echo previous posters convert your video to WMV to work at AE is one of the worst things you could do. So from a point of view of quality and a workflow perspective. Yes, the uncompressed files are large. you have to find a way to work with that.

  Why the WMV is bad? I'll call you my friend Dave LaRonde After Effects of CreativeCOW .net Forums:

  Response to Dave #1 Stock

  If the images you imported in AE are all sort of what follows - images in a codec to acquire HDV, MPEG1, MPEG2, mp4, m2t, H.261 or H.264 - you must convert it to a different codec.

  These kinds of sequences use the time compression or inter-trame. They have keyframes at regular intervals, with information of the full frame. However, middle managers have all the information. Codecs inter-trame launch duplicate information.

  In order to maintain maximum efficiency made, AE needs complete information for each image. But because these sorts of images contain only partial information, AE freaks out, resulting in a wide variety of problems.

  WMV falls into the same category using interframe compression. Even if you have used files directly from your device, you would have still some problems because your camera uses MPEG-4 h.264 compression.

  Try to export Corel a QuickTime using the PNG codec (I've never used the program, so I don't know if they give this option, but it is still visually lossless and a little less large files).

• problem with ghostscript ["Distill" did not produce the output file]

  Hello
  
  We try to convert the files to PDF using ghostscript.
  The steps that I followed by installing the Distiller
  
  First, I installed gs8.64 and configure distiller
  Refinery engine server-> Conversion Settings-> third-party Application-> Distiller Settings-> options->
  Use GhostScript and the path to install dierctory under C:/Program Files/gs/gs8.64/
  Installed according to the pdf printer
  Conversion-> primary redention web settings-> convert to PDF using third-party applications
  
  Server details:
  CS: 10gr 3
  Ghost script 8.64
  
  Please find details of newspapers below
  
  Error log...
  Copy c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Get exclusive access to c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Waiting to distill
  Look for the c:/ucm/server2/vault/~convert/idc/2/temp.pdf file does not have
  "Distill" did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf '.
  Exception type is "java.lang.Throwable". Details
  An error has occurred. The stack trace below shows more information.
  
  ! $Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > obtained exclusive on c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > access pending on distilled < br > check for the c:/ucm/server2/vault/~convert/idc/2/temp.pdf file has no < br > 'distilling '. did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf '. < br >! syExceptionType, java.lang.Throwable
  java.lang.Throwable
  at intradoc.common.IdcLogWriter.doMessageAppend (unknown Source)
  at intradoc.common.Log.addMessage (unknown Source)
  at intradoc.common.Log.errorEx2 (unknown Source)
  at intradoc.common.Log.errorEx (unknown Source)
  at docrefinery.agent.Logger.logError(Logger.java:138)
  at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
  at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
  at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
  at docrefinery.convert.ConversionDriver.processSubConversion(ConversionDriver.java:165)
  at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:109)
  at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
  at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
  at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
  at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
  to docrefinery.queue.PreConvertedRefineryQueueMonitor$ 1.run(PreConvertedRefineryQueueMonitor.java:93)
  at java.lang.Thread.run(Thread.java:595)
  
  Conversion completed - step PostscriptToPDF forced conversion conversion due to the error engine failure: 'Distil' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/8/temp.pdf '. ». Exception type is "java.lang.Throwable".
  
  
  Please suggest me where I'm wrong...
  
  Thanks in advance,
  
  Prasad V.

  Hello

  This pf ghostscript version has some problems with conversions and I saw what happens sometimes. I recommend you go to 8.63 if available and the restest to see if the conversion fails

  Thank you
  Srinath

• Download Helper - how to download and save files .wmv WITHOUT the video being downloaded reading on screen?

  Windows 7 Pro
  Latest Version of Firefox
  Latest Version of Download Helper
  Windows Media Player and VLC are installed

  When I download a video file (.wmv, usually) the video starts to play on the screen of the monitor prior to my being able to use Download Helper to download the video and save it on the hard drive. This generally translates the video stopping and playing and stopping the process of download because of the speed of download available. There is never any problem with the final download hard disk.

  Today I installed the latest version of Firefox and Download Helper on another computer.
  Windows 7
  Latest Version of Firefox
  Latest Version of Download Helper
  Windows Media Player (not) is installed

  Downloaded the same .wmv file you downloaded above and the video started to play on the screen of the monitor. Download Helper has allowed me to download the file on the disk hard WITHOUT constantly tuned to the video start/stop/start/stop etc.

  Which option (in which program) would allow playback of the video to be turned on and off all by downloading the .wmv file?

  Thank you.

  Once the download has started, you can go to another web page. The
  Download must be a separate function.

• Audio problems

  Hi, I have audio problems! I downloaded Skype on my windows laptop 10, and I have audio problems with only my Skype. I checked the audio setting on my laptop and they are very well, I tried to save regularly, and it was perfectly good. I checked the audio on my Skype, they seem to be well, but does not record the microphone. When I talk about the green line of volume is not hear me, and move. However I tried to snap my fingers just above the mic, and if I did it really hard two or three times the volume of the green line would move just really slowly, however when I spoke into the microphone it is not. I deleted and downloaded again, but has not fixed the problem and I don't know what to do. None of the parameters have changed, but when I checked my setting of the laptop, Skype was not one of the apps listed as the microphone (and I don't know how to change.) In fact, when I checked all my settings of the computer, Skype did not appear for the use of microphone, speakers or camera (but I get only problems with the audio.) Please get back to me as soon as possible to help with suggestions! I use Skype to talk to family and work, but also to stay in touch with teachers and take classes.

  Please, run the diagnostic tool (32 bit) DirectX. Run dxdiag.exe (Start - Run or Win + R key), then press on enter or click 'OK '. Once the diagnosis is complete, "save all information...". "in a text file. Please attach this file to your message.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• output file missing error

  windows xp ser pk 3 starts I get missing output file in the dynamic library. Can someone tell me how to fix this problem. I can't find an answer anywhere.

  Something is apparently from Windows and failing. You should know that something is and troubleshoot accordingly.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Audio problems in Movie Maker

  I have audio problems with windows movie maker, my speakers are on & works with itunes that do I do? The sound is not muted and if I go to youtube or I can listen to the music from itunes, but when I try to watch a movie that I created in windows movie maker, it plays, but just with no sound... Also, I can't play instrumental music files (which are downloaded) in a movie instead, I did being able to hear mp3s, I downloaded & I used to be able to play in a film I've done... I have no viruses either so I need to know what the problem is... I have antivirus protection & it automatically gets rid of the virus if I computer, so this isn't the problem, please HelP!

  Movie Maker has compatibility issues with. MP3 files...
  It may be worth trying to convert the. MP3 files to the
  . Format WMA before you import into Movie Maker.