Canon PIXMA IP5300 does not work on my Win8Pro64bit

Similar Questions

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Canon Rebel XS - does not work in AI Focus or ONE SHOT mode

  Hello

  My camera was working fine until now, and all of a sudden she decided to not work. I have 2 lenses with me, the standard 18-55 and another 75-300. On the 18-55, when I try to take photos in AF mode, it will keep the flicker of the flash but will never take a photo. I read a few posts earlier and tried to take pictures in P, Tv, AV, M modes by selecting HAVE Focus and ONESHOT and it won't take a picture. In all of these modes, if I select AI SERVO, it take pictures.

  I tried to clean my lens too, but it does not help. When I used the 75-300 lens, the camera is able to take pictures in AF with I-Focus.

  Can someone please help and I would like to know if my lens 18-55 a bad shot or can it be solved somehow.

  If the camera and the lens cannot focus even outside sunny day is certainly a problem.

  By chance you happen to own other objectives (or have a friend or a family member with a lens Canon EOS, you might be able to test on your camera body.)

  It is more likely that the development in the lens system does not rather than the camera body (because all moving parts associated with the focus system live inside the lens).

  Your camera has in fact two independent systems to focus.  The primary system is "phase detection" auto focus system  It's the fastest system and it uses sensors that live on the bottom of the camera (just below the reflex mirror).  This system is used when you use the camera normally looking in the viewfinder to take the picture.

  The other system is a system of development of "contrast detection.  This system uses the image of the camera sensor to evaluate the development.  It is not as fast as the phase detect system and must hunt for focus (a bit like a camera point & shoot) but it is true.  This system is used only when you put the camera in "Live view" (when you're using the LCD screen to compose and take the picture rather than looking in the viewfinder).

  If IT a problem with the phase-detect setting point sensors, you can put the unit in "Live view" and take some pictures.   If it works in Live View mode, but works not in mode normal (viewfinder), then the problem is in your camera.  If this does not work in viewfinder or Live View mode then the problem is almost certainly with the goal.

• Canon's ScanGear does not work on a particular user account.

  I use a scanner Canon LiDE 70 USB with 64-bit in W7HPx64, since August 2012 driver:

  "Canon ScanGear Version 12.1.1 64-bit Edition.
  ' This product is a scanner driver compatible 64 bits for CanoScan TWAIN . Scan LiDE 70. »

  I have 3 user accounts and Admin and generally scan in (Paint Shop Pro v6.02 of). PSP and Canon are located via the registry - Canon also puts data files in the records of mobile users.

  So a few days ago, I discovered that in my user account, PSP could not see only the undernourished WIA TWAIN drivers.

  My problem is that the PSP can see TWAIN in other accounts.

  I also discovered that Lotus Word Pro cannot see TWAIN in my account, but he sees in all 3 other accounts.  I can scan fortunately which / to Lotus so I can't with PSP, juice from my account.

  I disabled the WIA service, so nobody gets to have a choice now, but all this has done to my account it's that now PSP and Lotus can not see any drivers at all, while the other 3 accounts are quite happy.

  ODD FACTOID: I turn on CanoScan Toolbox 5.0, and it has zero issues, implementation of the TWAIN interface instantly.

  I tried the cure of the displayed Path here in January 2012 System Variable, but that does not work.

  Thus, the scanner is not borked, PSP on all accounts is not borked, Lotus on the accounts of all is not completely borked and Canon software in the world is not borked.

  Where am I wrong?

  Gordon.

  Hello Gordon,.

  I'll guess that you have checked your event viewer to see if there were errors in there? Sometimes these things "straight" and you're almost better to just go with the "fix" rather than driving yourself crazy trying to figure what is happening. A few days ago that I have simply assign questions to the Gremlins and move. I agree, but it is good to know the why of a problem... but... you may end up spending far more time than it's worth.

  You can also try a chkdsk /f /r to see if there are bad sectors.

  Something for the future, would be to throw together a quick list of what had to be twisted after so that you have a checklist where it never happens again. It will make things much easier.

  See you soon,.

  Cameron

• Film 24 p from Canon .mts import does not work.

  I was happy to see the premier CS5 could import film 24 p from Canon and have ready project settings for this.

  I was disappointed to know that this function does not work.  The Prime Minister shows my files .mts in 29.97 FPS, so I guess that the camera should close the film 24 p inside the container of 29.97 FPS?

  Did someone knows a way to easy to open a .mts file in After Effects, interpret the film for "Guess 2:3 pulldown" open and save and export the file again in the first?

  I can't find a way to export the images interpreted After effects first.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  Garetron wrote:

  I'm in my camera settings and switch between 60i, 30 p, and 24 p, so if he is 'Not Correct', then Canon is ~.

  Canon page specifically says 24 p recorded in 60i.

  If you want 24 p native resume your camera and get a HV40.

• Canon Pixma MG3520 - does not light

  Canon Pixma MG3520

  I have just printed/copied paperwork this week!

  It absolutely, positively, not light.

  I bought this last semester, which would have been around January or February of this year.

  It has not been moved, the circuit on the Strip, to which it is connected has not been triggered, everything must be in perfect working condition.

  How can I go about it? Reset somehow? Send it for repair? Do a dance and sacrificing a Nikon?

  Help please. I will need very soon for the school.

  Update:

  Fact a little research and it is a known problem with the firmware.

  See here: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520?p...

  And here: http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520#Drive...

  I unplug for a bit more than two minutes and did not return.

  Now, at the beginning when I was doing the instiallation, he says that he has failed. But I turned the printer and turn it on again (hah...) after failure and we are back online and print. So I don't know if the firmware updated succeeded. But the printer works again and that's all that matters for now!

• Canon MX310 scanner does not work with Windows 7

  I can't the scanner on my Canon MX310 for work since I switched from Windows XP to Windows 7.  I downloaded and insalled all current Canon drivers.  Even spoke with a representative of the Canon Service for more than 1 1/2 hours and they we not able to help me.

  Are we supposed to guess what you said hot?

• Canon MP600 scanner does not work on windows 7

  I just bought a laptop for Christmas. Windows 7. and so I tried to connect my Canon mp600 up to it, but its saying my scanner driver supported by the software is not installed! Ive tried to download the drivers from the Canon Website, but none of them work!

  Unplug the printer from the PC.  Go to configuration, programs and feature control panel and uninstall all software of Canon which shows as being installed.

  Go to the Canon Website and download a new copy of the software: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=13800#DownloadDetailAct

  Install the software and do NOT reconnect the printer until the software tells you to do.

• Canon 9950F scanner does not work with 10 items in Windows 7

  After the upgrade to 64-bit Windows 7, I was able to use my scanner Canon 9950F with 10 items. When you try to import an image I get the following error message: "no WIA compatible devices have been detected. Make sure your device is connected to the computer and the power is turned on. I tried to update the driver compatible Windows 7 provided by Canon, but that doesn't seem to help. Canon support advised me to turn to the Adobe community. It seems so, Miss me the WIA driver, but since I have already installed the latest updates of Canon I'm not sure of where to get one. All faced a similar problem (solved)?

  The TWAIN component must be installed:

  http://helpx.Adobe.com/Photoshop-elements/KB/TWAIN-installed-Photoshop-elements-9.html

  Please let us know if it works for you.

• Series of Canon MP495 printer does not work

  Connected via a USB port.  When clicked on the print device it says under status troubleshooting needs.  When clicked on the Troubleshooting tab, the message box displays some of disorders.

  Hello

  1. If it works well before?

  2. don't you make changes to the computer until the problem occurred?

  3. what operating system do you use?

  I suggest you try the steps below and check if it helps

  Method 1: Try the steps from the link below.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

   
  Method 2: Also try to update the driver from the link below:
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp495?selectedName=DriversAndSoftware

  Hope this information is useful.

• Why my canon i960 printer does not work on windows 7

  Iseem have tried all things. IT keeps telling me to go awry.

  Go to here...

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&fcategoryid=117&ModelId=9388#DownloadDetailAct

  Download and install Windows 7 drivers for your printer...
  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Canon Lide 35 does not work for my...

  I download the driver but I got a message like whatever it is no driver even after having run someone can help me is it you please.

  Hello
   
  Sorry, this forum is in English only.
   
  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.
   
  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:
   
  http://support.Microsoft.com/common/international.aspx
   
  Concerning

• Scanner Canon 3200 F does not work on windows 8

  Hello

  After installing the latest driver for this scanner Windows 8 can't find it
  Impossible to use to scan LUN
  message "Twain"?
  Do you have an idea of the problem for helping me find the solution
  Thank you
  GF

  Hello

  After installing the latest driver for this scanner Windows 8 can't find it
  Impossible to use to scan LUN

  message "Twain"?

  Do you have an idea of the problem for helping me find the solution

  Thank you

  GF

  Please re-post this in terms of the language in the menu drop-down list at the bottom of the page. This forum is for English only.

  

  If you can't find the language you need, additional language support can be found here...
  http://support.Microsoft.com/common/international.aspx

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!