Canon PowerShot S330 digital camera 2.0mp driver

Similar Questions

• Canon PowerShot S200 digital camera 2.0MP

  My Canon PowerShot S200 digital camera 2.0MP does not work with Windows7.  I can't find a driver for Win7 from Canon site.  Am I out of luck?

  Canon Power Shot S200 is marked as compatible with Windows 7 Compatibility Center page. as you note, however, is not.

  But suggest to install the Vista driver. Canon support website has no such driver. The latest driver for the S200 seems to be XP. I tried to run this driver in compatibility mode, but nothing helped.
  Any other suggestions?
  Thank you!

• Canon PowerShot S95 digital camera 10.0MP

  Using Windows 7 on my ASUS Eee PC netbook.  Tried to load the S95 Office software using an external drive, the system is not compatible with a resolution less than 1024 x 768, but the system of resolution of my netbook will only 1024 x 600.  Solutions?  B in Guangzhou

  Solutions would come software for camera manufacturers.  ;-)

• Not to recognize the powershot A85 digital camera which is within a digital x-ray converter

  Original title: roderick foster

  Hi, my name's rod and I'm having a lot of problems with windows 7, recognizing a camera digital powershot A85 that is inside a digital x-ray converter. now my question is there a difficulty to do, this old software x - ray working of the machine within windows 7? I tried all modes same compatibility convenience store as the program says can't find the DRC and unable to connect to the DRC. Today, for the first time, it appeared that software and DRC was trying to connect but then and error message saying mainform and a whole list of other things can help someone or I'll have to take the XP operating system where the program has worked very well. Oh by the way I thought to use XP mode (virtual), but I don't know how wise it would be anyone can get an idea on this issue. Thank you

  If you are referring to A85 digital camera, try to install the drivers from the link.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a85?selectedName=DriversAndSoftware

  X-ray are which digital converter you referring?

  If you have tried everything, Microsoft can't do anything because the software is provided by the manufacturer of the non-Microsoft device.

• Computer will not recognize Canon Powershot SX30 IS camera

  I just upgraded to a new computer. Operating system is Windows 7.  It does not recognize my camera. I tried I go through start to computer (not found).  Cannot find under Device Manager either. Nothing. I guess I need a new driver downloaded, but when I go to the Canon Website, it tells me that no driver is needed for Windows 7.

  I'm not an expert in computer science (and not by a long shot). I tried 2 different USB cables, the two nothing helps. I also found a previous thread for the Canon Rebel camera, but the menus on both cameras are different, is not applicable for my camera. Everyone is the same experience? Any suggestions? I can put the card directly qinto the computer, but it does not work underground with the photos in the same way - thus suggesting a card reader is not really solve my problem.
  I have already installed the installation CD and everything seems to have loaded correctly. However, as soon asI connect the camera to the USB port - nothing happens. It worked fine (literally just a fe minutes before on the old Windows XP system (it worked flawlessly in fact).) Not sure what the glitch is on it.  Anyone?

  Hello

  Do you get any error messages?
  Method 1:
  I suggest you run the troubleshooter and check.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2:
  If the problem is not resolved you can manually install the program in a mode of compatibility with control.
  copy and save the content of the software CD on the desktop in a new folder.
  b. right-click on the program's installation file and click Properties.
  b. click on the tab compatibility.
  c. under compatibility mode section, check check "run this program in compatibility mode for" and select "Windows XP Service Pack 2" in the drop-down list. "
  d. under "privilege level" section, check the brand "run this program as Administrator"
  e. click ok to apply the changes.
  f. open file and install it.

  See the link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 3:
  If the problem persists, you can select the correct operating system version and try to install the drivers and software provided in the following link:
  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/other_powershot/powershot_sx30_is#DriversAndSoftware

  If the problem persists I suggest you to contact Canon Support.
  http://www.Canon.com/support/

  I hope this information helps!

• Windows does not recognize the Powershot A85 digital camera

  my camera is plugged in the Device Manager it is said that it works correctly, but it is not recognized by my windows 7 ultimate can someone help

  Hello Roderick,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. do you receive a code or message when you say, "it is not recognized by my windows 7 ultimate?

  2. is the specific question to all USB devices?

  It seems that the USB drivers are corrupt because of which Windows does not recognize your camera. We will work together to solve the problem.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Controllers USB reinstall and check the issue.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted. Please follow these steps:

  a. Click Start, type Manager of devices in the start search box, then click on 'Device Manager' in the list programs.

  b. develop a 'USB Bus controllers'. Right click on a device, and then click "Uninstall".

  c. repeat the above steps for each device.

  d. Once completed, restart your computer.

  USB controllers will automatically install.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• driver for Canon powershot s45

  I have recently upgraded to windows 7 and I have a powershot s45 digital camera, the driver is not compatible and cannot find the upgrade on the canon or windows update of ideas Web site?

  You might want to get a memory card reader, remove the card from the camera and treat it as a removable hard drive... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Canon PowerShot A590 IS digital camera 8MP

  Hi, I have a Canon PowerShot A590 IS digital camera 8MP.  I have recently upgraded to windows 7.  Where can I find the top dates, (hardware & drivers) & etc so that I can load my pictures on my computer? The camera is about 5 years old & worked fine with windows XP, I installed the disc that came with i but now it will load all the photos. Thanks for your help.

  Hello

  It seems that there is no driver for Windows 7. The driver can be included in Windows 7, or you may not need to pilot.

  See the link.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a590_is#DriversAndSoftware

  Try to install all updates for Windows 7 and check.

  See the link.

  http://Windows.Microsoft.com/is-is/Windows7/install-Windows-updates

  I also suggest that you contact the support team of Cannon for assistance.

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• Canon PowerShot S300 2.1MP camera digital win 7 drivers

  Canon PowerShot S300 2.1MP camera digital win 7 drivers. Someone at - it a Win 7 driver for this device?

  Hello

  Canon offers no windows 7 drivers for this device. You can try to install windows XP drivers in compatibility mode and check if that helps.

  Download link for the drivers: http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_g_series/powershot_s300#DriversAndSoftware

  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

• Digital camera Canon PowerShot G2 need Drivers, MSVista o/s

  You can help us with the following?

  A problem with your digital camera

  Digital camera is not compatible with this version of Windows.

  Canon Inc. is not intended to offer updates for your digital camera to fix this.

  Canon has written drivers for their products, not Microsoft.

  I'm sorry, but we cannot help you.

  I suggest you contact Canon Support direct: http://www.usa.canon.com/consumer/controller?act=SupportIndexAct

  See you soon.

  Mick Murphy - Microsoft partner

• Camera Digital Canon PowerShot A530 5MP is not recognized by Windows 7

  I have a new laptop HP dm4t Beats's.  He uses Windows 7 Home Premium 64-bit.  Software of my Canon Power Shot A530 5MP digital camera does not include Windows 7 compatible and I'm unable to use my computer with my unicameral.
  What can I do?
  Thank you.
  Scott Hanel
  [phone number removed]

  Go to http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a530#DriversAndSoftware and see the options and the FAQ.

• Where can I find a driver for - Canon Powershot S300

  Where can I find a driver for the Canon Powershot S300?

  Where can I find a driver for the Canon Powershot S300?

  If it exists, you can find it on the Canon website.

  But you don't need. You ever need connect your device directly. Just buy a USB drive to SD card (or any form of memory card your camera uses). They are very expensive - generally around 2 US $ on Amazon.com - and are very easy to use. I find them preferable to connect the camera. on the one hand it does not use the batteries of your camera.

  .

• Canon digital camera is not recognizable to my computer download

  I downloaded the cd from the camera digital canon powershot to my computer. Then the connected camera. I then clicked on browezer zoom on my desk and went to acquire the device settings, then connect the camera. Images downloaded from the camera. But all the images are unrecognizable. Only the colors, lines. quarrel, nothing recognizble. Is something wrong with windows xp, digital camera Canon, zoom browzer, etc..

  Help, please

  Thank you Tim

  Contact Canon support.

• Device driver for Canon Powershot G2 not found.

  I've just set up my new pc with Windows 7 Home Edition.  I have connected a Canon Powershot G2, but it cannot locate the device driver.  But when I check the list of devices, this camera is on the list and he said there is nothing I have to do.  An idea that I have to do to get the device operational?

  Hi MarkPosey,

  Try these steps and check the result.
  Step 1: Manually install the device driver
  a. use the device CD you got with the camera and install the driver.
  b. check if it works very well.

  Step 2: If the problem persists, check the Windows updates to see if there is an update available for your device
  see automatically get recommended drivers and updates for your hardware .
  b. download and install the update just for your device and restart the computer.
  c. check to see if the problem persists.

  See also install a USB device

  For further assistance, please contact Canon support team

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista does not see my Canon G12 digital camera

  I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
  I used this camera and other cameras on this computer before and had no problem connecting to the cameras.  Today, I'm having a problem.
  (1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
  "(2)"new hardware found"window that reads,".
  Windows needs to install driver software for Canon digital camera»
  There are three choices:

  • Locate and install driver software
  • Ask me later
  • Do not show the message for this device

  (3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device."  Windows found driver software for your device but encountered an error trying to install it.
  Digital camera
  An error occurred during the installation of the device:
  Cannot install the driver because he is only not digitally signed properly.  Contact your hardware vendor. »

  I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked.  |

  AFAIK there are no drivers for this device on the Canon website.  How can I get my Windows Vista computer to recognize my Canon G11 camera?

  Thank you
  John

  a screen pops up announcing that a new device has been detected.

  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.

  In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.