Canon XF files import problems

Similar Questions

• .Mp4 and .mts video files import problems

  I've updated Premiere Pro 2015.4 and now all .mp4 or .mts files import video shows only and not audio. It's as if there is no sound in the video. Nobody knows all the solutions to this problem?

  Hi Jonathanm,

  Please close Premiere Pro and clean the media cache.

  FAQ: How to clean the files hide media

  Re-launch of Premiere Pro and import your files again.

  Thank you

  Ilyes Singh

• The oldest FCP7 project XML file import problem

  We have an older documentary project which was originally first editing in Final Cut 7, and strive to put first. I exported successfully the whole project from FCP to a XML file (latest version - 5 I think) when you import the XML file, I get the following message: "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. "Even though we had very many sequences and tons of clips, anything at all in there. Any ideas what could happen?

  I was able to solve the problem in first just update to the latest version via Adobe Cloud.

• XDCAM EX files import problem

  This is the first time that I imported the XDCAM EX files in this version of the Prime Minister, and when I select the camera name, in which resides the BPAV file where all the info of the clip, is the only thing that matters is an empty file of BPAV.  I tried selecting the my hard drive BPAV file and it comes in a vacuum.  I tried to select the video file in the file BPAVE and it is in a vacuum, so for the moment I have to open the file clip and individually select each mp4 file to import in PP.  Is this a problem with the program or do I have to go somewhere else is the cause.  In previous versions, the import has always functioned very well.  Anyone encountered this or have any suggestions?

  THX... Jim Watt

  Mac Pro (mid-2009)

  2 x 2.93 GHz 6 core Intel Xeon

  10.9.5 OSX

  40 GB 1333 MHz DDR3 Ram

  Video Kona III card

  Graphics Quadro 4000 card

  Adobe CC 2014 (8.1)

  Xserve Raid video player more 3 internal video drives of 2 TB

  Trashed preferences & rebooted... seems to have solved the problem

• mp3 file import problem

  I encode an audio file using ffmpeg.
  
  When I try to load the output file in flash (sound object), I hear no sound. However, if I take the same audio file and re - encode using itunes, it loads in flash very well and I can hear the audio.
  
  When I try to import the first file, I get:
  "One or more files were not imported because he had problems reading of their. I am aware that Flash displays this error in the files of more than 160 Kbps, but it is its bitrate is at 96 kbps. The second file (encoded in itunes) imports fine.
  
  When I open the two files in Soundforge or iTunes, two file properties appear identical (44 kHz, 96 Kbps), but the file encoded in itunes is slightly larger. Am I missing something? Why the first file does not work?
  
  If you want, here are the two files:
  
  http://hatchbackstudios.com/uploads/44.96.MP3
  http://hatchbackstudios.com/uploads/44.96_itunes.MP3
  

  ggshow, thank you for your help.

  I was indeed using ffmpeg without the lame encoder installed. So, after you have installed the library blade with ffmpeg (that is, BTW, a HUGE PAIN if you don't have root access), it finally works.

  Thanks again for your time. And if there is someone else out there with this problem, do the following via ssh:

• (CLOB) .dmp file import problems

  Hi all
  
  I'm using oracle 10g XE
  
  I am facing a problem with the import dmp (one of my table contains coloum clob)
  
  mentioned below is the error it gives when importing, please guide me on how to handle this.
  
  Thanks in advance
  
  concerning
  
  Uday
  
  
  
  "CREATE TABLE 'RTEXT" (NUMBER OF "SRNO", "TEXTDET" CLOB) PCTFREE, PCTUSED 40 "10."
  "INITRANS MAXTRANS STORAGE (65536 FREELISTS AND FREELIST GROUPS 1 INITIAL 255 1.
  "1 DEFAULT USER_TABLES) TABLESPACE"APEX_1244730274482010"LOGGING NOCOMPRES.
  "S LOB ("TEXTDET") STORE AS (TABLESPACE 'APEX_1244730274482010' ENABLE STOR".
  'THE AGE ONLINE CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING (65536 INITIAL STORAGE '.
  "(FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)).
  IMP-00003: ORACLE error 959
  ORA-00959: tablespace "APEX_1244730274482010" does not exist

  You must use REMAP_TABLESPACE = APEX_1244730274482010: so that there is no such thing as the import clearly as an additional parameter, as the error message indicates the storage space. If you have 2 options, either to create this tablespace or map this tablespace to some existing or newly created tablespace in your database.

  It will be useful.
  Ash

• Illustrator CS4 PSD files import problem

  I suddenly have trouble cleaning importing Illustrator CS4 files in Photoshop CS4.  I use these products for years and have done this hundreds of times without difficulty.  But all of a sudden, the resulting files are not smoothed.

  Illustrator files are saved with the PDF compatibility option checked.  I tried to place them (and by engaging - I know they're looking bad but clean after validation) and I tried to paste from Illustrator.  Not here are the relatively simple files with no font - text only - and no transparency or effects.  I also tried to save as EPS files, but without success.  I took to export PNG since Illustrator files and import that.

  I'm short on a recent Mac tower with a lot of everything.  OS x 10.6.7 and everything is up-to-date.  Adobe Creative Suite CS4.

  Could something has been corrupted?  Something might be interfering?  Is there a setting preference-"Import Illustrator files nicely" which must be marketed?

  Thanks for all the ideas.

  When you place an EPS, PDF file or HAVE - there is an option in the options toolbar that says "smoothing". Make sure it's on.

  If you open a file in EPS, PDF or AI - there is a checkbox in the first dialog box that asks you the page number, resolution, etc. that says 'Anti-Aliasing (in the Page Options group). Make sure it's on.

• Canon T1i video import problem

  Hi people. I'm trying to import clips from Canon T1i in PP CS5, but it either does not want to add audio, or he puts on the track Audio 4. My Canon 1 Dm 4 does not. What I am doing wrong?

  Thank you

  Brian

  
  

  .. .he wants no more to add audio, or he puts on the track Audio 4.

  So, what is it? If this is the first, it's probably a codec that is not supported, but if it's the latter, it's because of the channel mappings. The audio in the clip is mono or stereo, and the first three audio tracks in the sequence are the opposite, so first creates a new track, which corresponds to the mapping of the source element. Note the small speaker in the track header icons; a speaker is mono, stereo means both speakers.

• File Import problem

  Currently, import force files in a hierearchy months of the year. Is it possible to force lightroom to import directly into a defined folder and do not use this hierarchy?

  Thank you

  Jim

  Yes. You do so in the Panel of the Destination of the import dialog box.

  Select "in a folder" BOF list organize.

• I can import my Canon XF100 files in FCP, I bought today. I downloaded Canon XF utility application, but do not understand how it works. Appreciate any suggestions of people perhaps!

  I can't import my Canon XF100 files in FCP. I downloaded the Canon XF utility, but do not understand how it works. I work with a 24 inch Mac (2009), 8 GB of memory running with El Capitan 10.11.6

  Make sure that the last formats video Prois installed.

  Russ

• Lightroom photo import problem

  I have a problem with importing photos from my Panasonic Lumix camera. This is a new problem, it worked fine until my last import successful in May.

  In may, I imported about 1200 high ground JPEG. No problems.

  Now, here's what I feel. When I try to import now, the area preview import watch boxes without pictures... each box has the number of the photo below as it should... However there are no images. I did the following to try to focus on the issue.

  1. I tried other memory cards using the same device... no luck, same problem.

  2 - I downloaded the images on my desk and put them in a folder and then tried to import them into Lightroom folder. The same problem.

  3 - I tried a memory card for a Canon G1x... everything works perfectly... Files JPEG and Raw files import all perfectly as it should and the preview images are there as it should.

  4. I tried to drag the folder of photos in IPhoto... perfect. no problems.

  It therefore seems to be a problem of camera... It's almost as if the camera is written in a language that Lightroom does not recognize these files.

  But everything was Ok in May when I imported before.

  Confused, and research advisor.

  Jim

  The import doesn't work is not is a bug fixed in Lightroom 6.6.1 (so you do not have the current version). I recommend you do the update to 6.6.1 LR and see if the problem goes away. Keeping up-to-date in Lightroom

• Canon RAW files failure of compatibility (80 d EOS) CC (LR & PS)

  Does anyone have experience with Canon RAW produced by the 80 d EOS files imported into LR or PS (Adobe CC).

  I have the experience that the LR and PS are the quality of the RAW files and they get Grainy/Noisy and also the colors seem to lose something.

  I don't do RAW and JPG pictures and when you use LR or PS RAW files are very grainy/noisy and I was not even able to reproduce the colors I get the JPG in PS and LR. In the specific case, I got the yellow was missing in RAW format and also disappeared from the histogram, when I turned on the correction of the lens (although the correction of the objective has not changed color in the image on the screen).

  When I open the RAW and JPG in Digital Photo teacher (Canon DPP) reveal the RAW and JPG about similar and nothing like the grainy/noisy result of LR and PS appears.

  I had Adobe support (which means a technician has been on my PC for about an hour), but although the problem seems less than before, it is always the case.   The technician actually had the problem that it was not able to judge the adhering when working remotely.

  I feel there is a problem here with the most recent CR2 produced by EOS80D camera raw compatibility.

  Anyone having the same problems?

  RESPS are presented:

  Photo 1 2 and 3: imports RAW LR with and without correction of the lens; (note the change of histogram ;) In the meantime the adhering is shown

  Photo 4 and 5: LR JPG import and adhering

  Picture 6, 7 and 8 import DPP Raw resp., adhering, and DPP JPG import

  

  

  Hi Louis, I had a go at the image of the bird and was able to make a little sharper and more detailed than the jpg.

  Rather than make my own interpretation of the image, I tried to match the jpg (apart from the color of the sky).

  See screenshot below 1:1. (click to enlarge)

  

  First, I went in the camera calibration Panel and set the Standard camera profile, making the colors of the bird very similar in jpg format. The sky match, perhaps because of some settings in the camera, I don't know.

  The basic settings are then defined like this:

  

  Sharpening and noise reduction have been set as follows:

  

  Let's start with the noise reduction.

  There was a bit of color noise in the image (very visible in the jpg and improved due to the overall sharpness). LR's default settings for color noise it deleted completely.

  There are still some luminance noise, which I somewhat reduced by setting the Luminance at 20. It could be reduced even further, but if exaggerated, it will lead to a quick glance "plasticky", digital.

  The key to sharpening parameter is masking. It protects the flat (like the sky) areas of sharpening and effectively sharpens the details only.

  Set to 0 it sharpen everything, put 100 he sharpen only the most distinct details. I regularly use a setting of 50 or more for all my work. You can hold down the Alt key while dragging the slider to see the effect. Black areas are protected, the white areas are sharp. The mask created visible sharpening halos around the bird and looks a bit worse than the jpg in this regard.

  Unlike PS, there is unfortunately no way to blur or sharpen an edge in LR.

  Always use 1:1 view during the application and evaluation of reduction of noise and sharpening, any other point of view will be inaccurate and misleading due to resizing the image.

  

  Finally, I have checked the corrections profile activate in the lens corrections Panel, which corrects the heavy vignetting in the image.

  You can see how dark corners are in the jpg file in the screenshot below.

  It is also a good idea to check to remove the chromatic aberration.

  

• Import problems in Lightroom CC / Windows 10

  Import problems in Lightroom CC / Windows 10

  I have problems to import a batch of photos of a recent session. I am importing images, every time even on the same day, since a camera SD card on my hard drive using the option "copy as DNG.  My original files are Nikon raw (.) The NEF format) with sidecar JPG.  Among the 292 cases tried in importing, only 7 are converted. DNG format and do it in my catalog.  The remaining files have all been copied to my hard drive but are not converted to. DNG and do not appear in my catalog.  When I try to import and convert the remaining files that were copied on my drive hard but not converted to DNG or added to my catalog files is displayed with a check box but eventually fail to get changed or added to the catalog.

  I also tried to copy originals directly into a folder on my hard drive and making the Lightroom Import from there and get a similar result.

  I am under Lightroom CC on a Windows 10 PC.  Any idea what could be causing the problem?

  First of all why you are converting to DNG? LR CC read Nikon NEF files fine.

  Have you tried to copy the pictures to a folder on your disk and import only the naves with no conversion when importing?

  Start a new catalogue and test-only import NEF files with no conversion to DNG.

• EU LR4.4, 80 d canon raw file will not open?

  EU LR4.4, 80 d canon raw file will not open?

  Hi Andrewc,

  In order to open the files from Canon 80 d you need Lightroom 6.5.

  Please see the following link for a list of devices supported by Lightroom: supported by Adobe Camera Raw devices

  Or you can convert Camera Raw files to DNG using the DNG Converter and then import the files into Lightroom.

  Concerning

  Tanuj

• I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. I am running windows 10

  I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. After downloading, I loaded the program and then go to select the folder. When I go to records RAW files aren't there. I used DNG in the past with no problems but I have a new PC and running windows 10 and he would not consider my files RAW Canon cameras for some reason any. What am I doing wrong or it is not compatible with windows 10.

  Thanks, I use PLR, but I wanted to convert using DNG. It is all sorted now