FilePath to "open the other projects.

Similar Questions

• Open the other project - relative path

  I hate to keep asking this question... but someone came up with a viable solution for the opening of another project in Captivate 4 using a relative path? I see this discussion start and stop at various locations... but it never seems to be an answer that works. I don't quite understand why Adobe has taken this feature of this version... like he did the almost useless product for me. I need to be able to relate a project to another somehow, and I don't know the absolute path is going to be when I create the training.

  I don't know where else to turn for help on this. Anyone?

  Thank you.

  Margin

  Hello

  There are many factors at play here.

  Are you sure that Flash security is not hinder you?

  Click here for help with security setting

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Open the other project

  Two questions in one day. I'm on a roll...
  
  I'm running into a problem with the opening of another function of the project. I have published these two projects, and I have the first project implemented in place to call the second. When the first project calls the second project, all I get is a blank white square on a web page, nothing works. The URL seems correct, I have a second project .htm file in the same folder as the first project, but this second project just does not work.
  
  Is it because what is a folder on a network compared to desktop drive? Is the pointer get lost trying to the second project?
  
  Any help is appreciated to mucho.
  
  Thank you.

  Nevermind, I just answered my own question. I should have read a little further in the forums...

  Thank you

  Jimmy

• Open the other projects - does not work

  Hello-
  
  We just finished a lesson of the CBT in the 3 Hat, which includes 29 separate projects. At the end of each project, the student is introduced a button to bring to the next, that is 'open another project '.
  
  That is the question, we have put this button 'Open another project' and 'open a URL or file '. In both cases the next project does not open. The user is taken to a page of internet search. We have implemented the system of 'Success' button using the Captivate files help where it tells remove you all the ways of the system and just use the names of file or project. Button settings in Advanced Interaction also confirmed.
  
  We publish our projects in .exe format. This concern is present when we listen to extracts using the feature overview and products .exe.
  
  What we're doing wrong, any ideas?

  Rick - your basic source code provided us the answer. We made a comparison and found verified the following on all of our projects:

  Under preferences - project - beginning and end
  Start of project options:
  Loading screen:

  This has been verified with blank if Cape tried to start the next project with a blank so it is lacking for a web search page.

  Thank you, SO MUCH

  Mike

• whenever I tried to open a program, a window opens asking me programs that should be used to open the other program

  I was remove some unnecessary programs and sudennly the computer ask me which program to use to open the other program. I turned off the computer and then I used safe mode to see if I could restore my computer to a quick setup. but the very thing. I don't know if I erased by mistake som program. This never happened to me before. I use windows XP. I use internet explore to open a program and send me just for internet explorer, but not programs to opt I want you use. Any help o help to solve this problem? I'll apreciate any help thanks.

  Hello

  I suggest you to related changes by default by using Set Program Access and computer defaults:

  Method 1:

  How to change your default programs and enable or remove access to Microsoft Windows programs and non-Microsoft: http://support.microsoft.com/kb/332003

  Method 2:

  How to change or choose the program that starts when you double-click a file in Windows XP.

  http://support.Microsoft.com/kb/307859

  Method 3: If the problem persists, then try to create a new user account and check if it helps.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Hope this information is useful.

• In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported bot

  In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported two media accompanying the project of the lesson and media one of the practical projects that I've done before. Can someone tell me what I did wrong and why it has imported two sets of brackets instead of only in the media for the lesson. Media for two different projects are not storeed in the same place?

  I found the problem. Sorry if I've lost any time. Please do not take into account. Thank you.

• RH9 uninstalled, but cannot open the old project of RH8

  I have Robohelp 8 on my computer. I won Technical Communication Suite 3, which include RH9, in a draw and installed in a directory without removing RH8. Then I read that RH9 converts the files to a new format which is not backward compatible with RH8. It scared me, so I disabled and uninstalled RH9 and other components of the TCS3. RH8 remains on my computer, and I can run it normally. But when I tried to open an existing HTML project, I received a message that the project is in a new format which RH8 cannot read. So I unzipped a backup copy of the project, but got the same message with it too. I never opened the project in RH9, and I am sure that I never even launched RH9 on my computer before uninstalling it. So what the hell happens and how can I go back to the use of RH8? I hope someone can help me!

  Welcome to our community

  Not sure why you would be skittish about the use of version 9, but whatever.

  Try to remove the. DPC to the project file and then it should reopen in version 8. Of course, a feature that is compatible that with 9 don't understand 8.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Cannot open the RoboHtml project

  I received the following message trying to open all my help files today: "open a project has been cancelled or the application could not load the database [project name and path]." I followed the instructions given in the technical Note "RoboHelp X 5 Instructions" for this issue but still cannot open files. In fact, I can not yet launch a new project more. FYI-there is no other user in one of these files, and the last time I opened one was about three weeks ago. At that point, I had no problem.
  
  What could happen, and what can I do about it?
  
  Thanks in advance for your help.

  On a computer with Word 2000 or 2002, X 5 will run straight out of the box. On a computer with Word 2003, you will need to download the service pack as described in my article on installing RoboHelp.

  Even without this, HR would install and work up until you try to do something a word related, so this isn't the cause of your problem.

  Make sure that IT allows to install your logon. Too often, they think it is easier to use their logons, because they have the correct rights. Unfortunately HR will work only if installed with your logon with admin rights and this problem has all of the features of you not having is not the correct rights.

• Why a few recorded tracks "empty" when I opened the Garageband projects on another machine?

  Hey

  I have just updated my laptop to be able to run the same version of GarageBand on my iMac and MacBook (OS X El Capitan and GarageBand v.6.0.5) and work on projects of GB on what that machine is available.

  I just tried to open a few GB on my MacBook projects (both were created on my iMac) and the recorded vocal tracks are "empty", as below.  The track from the top (purple) is any wav. file and the blue trace below is the vocal track, although it says "file not found".

  

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.  Or I make a stupid mistake?  It's really quite likely, but any help is very welcome!

  Thank you

  Rich

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.

  The problem could be the DropBox synchronization. DropBox is ideal for simple documents, but your GarageBand projects are files with databases and multimedia files inside. Synchronization can break the connection between the media files and internal databases.

  If you want to transfer projects with Dropbox, it is safest to compress the projects and move to archive compressed to dropbox.

  But see, if the media are still inside the Garageband project. Perhaps the download was not complete.

  • CTRL-click the .band file and select "Show Package Contents".
  • In the Finder window that opens, select the "Media" folder
  • Copy the audio files in this folder to a folder on your desktop.
  • Try to identify the missing audio file.  If you can find it, drag it to the track where it is absent.

• Cannot open the old projects with Prelude CC 2015.4

  I've just updated to prelude CC 2015.4. I don't know exactly what version I was running, but it was 2015.x. whenever I try to open an old project, freezes Prelude and closes.

  Too bad. It took just 45 minutes to open the project.

• First opens the last project...

  Hello community,

  I'm new to Premiere Pro. Everytime I open the app, the last project I worked on automatically load. Is it possible to make first start without a project opening?

  Thank you!

  You have the choice between these two options:

  

• How can I import a composition to another project, in a way that it will remain always updated if it has changed in the other project?

  I have a model of logo in a project that I have to add to all the other compositions all over my other projects.

  The thing is, I've might need to change the logo from time to time and wouldn't go back and change the layout of the logo in each project.

  I need a way to import the model of the logo and to maintain its link with the original project, so I could only make a change once and then just make all other projects while the intro comp update automatically.

  Can you please help?

  I'm usign AE cc with creative cloud, on a PC computer.

  Thank you!

  Yoni

  Rick instructions assumes that you use a video file pre-rendered logo, which is the most convenient way to do the job, if you can.

  But, to answer your question more specifically, you can create a dynamic link to an another project AE AE project.

• Cannot open the LR project on the new system of Win 7 x 64

  Can someone tell me what is happening here?  I built a new PC, win7 x 64.  I put my LR database drive and my drive of LR in the new PC files.  The drive letters are the same as they were on the old PC.  I installed LR 2.7 on the new PC.  I opened the project very well file.

  After a reboot, I can open is no longer one of my old catalogss LR.  And I get a message like this.

  I get the same erros with LR3b2 catalogs.

  Your user name must be the owner or a member of the group that owns the player. Go to the Solution Explorer, click with the right button on the drive, properties/Security/Advanced/owner to see who is the owner and change for administrators (assuming that your username is a member of this group) or your username. Win7 is more strict on differentiate the permissions and ownership ala POSIX and LR seems to want property.

• If I try and follow a link from another Web site to open the other I get awclick.php pixels (GIF Image 1 x 1) in a new tab instead of the web page I want.

  I tried to open a Web site as a link from another site and I get a new tab that says:

  awclick.php (the Image GIF 1 x 1 pixels)

  I can open the Web site without clicking on a link to it simply by typing the address, but as this is a cashback site that I'm the link it does not help!

  Hiya,

  I don't get a GIF as Bodspice mentioned above, but I'm left with a blank page that has the following URL:

  http://www.awin1.com/awclick.php?mid=2481 & ID = 47868 & clickref = 319541108 & p = http :// www.blinkbox.com/Movies/Catalogue/Free

  I use Windows XP and Avast firewall as an anti-virus.

  I tested it on Chrome, it took me to the page immediately without any problem.

  No idea why and how to get rid of this problem? I'm not keen on the use of Chrome and prefer Firefox.

  Thanks in advance.

• Cannot open the second project

  In this video tutorial you can see about 03:00 you can see the items in a different (older, second) project in Premiere Pro:

  https://helpx.Adobe.com/Premiere-Pro/how-to/reuse-clips-multiple-projects.html?set=premier e-pro - basic principles - edition

  In the media browser, this tutorial shows objects and footage of this second project - in order to use some of them in the new (first).

  I tried to do the same thing, but it does not work in my first Pro CC 2014: when I am clicking on the second project (oder) in the media browser I just see the file *.prproj, nothting else. I can click or double click, right click, CTRL click... nothing.

  Can someone tell me why this is?

  Is there some preset that I have not found that I have to activate in advance or what?

  Hmmm. Maybe you have to kill the process and try again.

  That the process ends on its own after a while when I left Premiere Pro.