Capture the MacBook and Air Multi - Touch Scroll?

Similar Questions

• I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.

• How do I capture the error and display

  Lion of Oracle do it me the quick statement formula to capture the error and display in the Formulas (FF) fast in oracle payroll.
  In the case where the value of the element is Null, I want the system to show me in the quick pay message window what value of the item was left null so that I can make the entrance of this element and re deal with payroll.
  
  Appreciate all your help!

  for example.

  DEFAULT FOR YOUR_INPUT IS 0

  THE ENTRIES ARE YOUR_INPUT

  / * SECTION OF CODE * /.

  IF YOUR_INPUT HAS BEEN SET BY DEFAULT THEN
  (
  ERROR_MESSAGE = "INPUT VALUE IS NOT ENTERED.
  )
  ON THE OTHER
  (
  >
  )

  HTH

• (MacBook Pro retina, 13-inch, early 2015) The built-in keyboard and trackpad multi-touch responds

  Sometimes the Trackpad and keyboard from my MacBook Pro retina, 13-inch, early 2015 responds at the same time, have no other choice I have shut it off by holding the power button.

  Help me to solve this problem, if anyone knows the same problem or someone have it fixed.

  Technical specification :

  Operating system: OS x YOSEMITE 10.10.5

  MacBook Pro (retina, 13 inches, early 2015)

  2.7 GHz Intel Core i5 processor

  8 GB 1867 MHz DDR3 memory

  Storage 128GB PCIe - based flash storage

  Graphics Intel Graphics Iris 6100 1536 MB

  ROM version: MBP121.0167.B14

  Version SCM (System): 2.28f7

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Apple music: synchronization between the MacBook and the iPhone

  Hello

  I have the problem that I have the musics of the apple iPhone and MacBook. I use the same account here and here, but my list of music not sync between devices. Early on worked, but I changed the region and still later once I changed and I lost my list. Only, I see my list in my iPhone. When I create new list in iTunes on MacBook and add the new song I don't see in my iPhone.

  Sorry for my English. I hope you understand me and you help me.

  You must enable iCloud library on both devices so that your playlists and playlists stored in my music sync between devices.

• The memory usage for "Multi touch, keyboard.

  Hello

  Anyone who knows the uses of large capacity memory for the process of multi-touch keyboard? When I opened the process to the specific task that uses the large amount of memory is the notifier "Admin"... Does anyone have the same view on the other? Is this normal?

  I had set up some rules of application 'active actions' which I have since deleted. I though that could have been the cause.

• How to capture the paging and sorting of events to update the collection?

  I use a manual tabular form based on the collection. If I add/edit the data in the form and click next/previous page, all the changes are gone. The same thing happens when I sort the data by clicking on the column header.
  
  Apparently, I need to call APEX_COLLECTION. MERGE_MEMBERS the new or changed data in the collection. However, I could not imagine how to do it. One way would be to set up the javascript function called $a_report and precede wit a call to my js function that would proceed to an update of the collection. But how?
  
  Maybe there's a better way?
  
  Igor

  Igor,

  You will need to spend to use rendering partial Page to full page on this report. In the 4.0 version we should get more management control in the RRP, but to what extent is it still unknown events.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

• A project for the WEB and AIR

  I have a flex project... its been already, for the web. But I need an AIR version to run in our stores. The air version is essentially the same thing with a few adjustments.
  
  So first of all in flex builder, that I already put it in a web project... is anyway output a .air file now?
  
  Also in order to keep both versions in sync I would keep it as 1 project, a way for the project to be able to detect if it was 'plane' or not and to behave accordingly. In this way when the inevitable changes to do in the future I will not remember to bring any changes in both versions... Is it possible to implement?
  
  I'm using flex builder 3.
  
  Thank you!!!

  I found an article about this here: http://www.adobe.com/devnet/air/flex/articles/flex_air_codebase.html

• Pointing device Touchpad with power button and precision multi touch gesture of support.

  Red led lights up just to the left of the touchpad. What turns on and off the touchpad?

  Hello

  Double clicking the top left of the touchpad will switch it power.

  Kind regards

  DP - K

• Impossible to change the mouse settings to use multi-touch

  Hello.

  I own a Samsung Satellite C655D-S5209 and I can't use my multi touch on my touchpad control.  I recently tried to download a new driver (Synaptics PS/2 Port Touchpad Compatible) and when I click on device settings the only thing I can change is that the action of the left and right button.  How can I activate the scrolling, zoom in and out and other multi-touch controls?
  Thanks for the help.
  PKR0624

  Hello

  I figured (its why I mentioned a Toshiba driver!). Here is the link to the Toshiba Support site for your model: http://support.toshiba.com/support/modelHome?freeText=3083046 . Looks like you'll be able to find your driver here.

  Let me know how you fare.

  Kind regards

  BearPup

• 13 "Macbook Pro retina heats up on the bridge and google maps satellite

  Hello!

  I have a 13 "Macbook Pro retina

  I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

  Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

  I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

  Thank you!

  Hello there, villovsky.

  Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

  Reset the management system (SCM) controller on your Mac.

  Before resetting the SMC

  Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

  1. Press Command-Option-ESC to force stop any application that is not responding.
  2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by selecting restart from the Apple menu.
  4. Stop your Mac by choosing stop from the Apple menu.
  5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

  If you are using a Mac laptop, which is the power or battery issues:

  1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
  2. Stop your Mac.
  3. Remove and reinsert the battery, if it is removable battery.
  4. Restart your Mac.

  If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

  

  Indicators that need to be reset your SMC

  After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
  • The backlight on the keyboard not behave correctly on Macs with this feature.
  • The led State (SIL) not behave correctly on Macs with this feature.
  • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
  • The computer does not respond to the when you press the power button.
  • Mac laptop does not properly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • Battery does not charge properly.
  • The MagSafe LED power adapter does not have the correct activity.
  • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
  • Application icons can bounce on the dock for a while when opened.
  • Applications may not work correctly, or they may stop responding after the opening.
  • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  

  Reset the SMC on Mac Laptops

  First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

  If the battery is good behaviour

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  If the battery is removable

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Thank you for being a part of the communities of Apple Support.

  Kind regards.

• He says the Xoom * REAL * multi touch?

  Hello! First post... I'm just curious if you please, before making a decision on the tablet PC, if the Xoom supports * real * multi touch? In the specification of it says 'pinch zoom ability' or something like that, so I think not. Would be great if it's good, because I think that hardware and software wise that this the best Tablet there at the moment...

  Thank you

  DaveB

  
  

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• My new Wacom Intuos Pro is having problems of fluidity of multi-touch in Photoshop and throughout windows (it's stuttery to rotate and zoom!)!

  Hi I have literally just back a few hours before with my brand new Pro Intuos of Wacom support. I put it all this (installed on drums) and plugged in the USB cable and uninstalled my previous "Wacom Bambo Fun Pen and Touch" restarted my computer and installed the latest drivers Intuos wacom site Pro.

  Now, all the gestures in Photoshop 2015.1 CC are not smooth or fluid with it, just like my "Bambo Fun Pen and Touch". In particular, the tool rotation, (rotates in about 20 degree increments)-I think it's something to do with the Tablet, triggering standard keyboard shortcuts for reach a false multi touch. and is not how it's supposed to be! I saw it on youtube.

  I think (after scouring the mountains of websites and forums) that it's something to do with windows 10 'precision Touchpad' or something but I can't seem to find anything much in that no matter what? Zoom even microsoft edge is very irregular and is designed to be smooth with a touchpad !

  That's what my settings of the mouse and touchpad tell below. There is nothing to touch, nor in any system of pen and touch of the dialog boxes. option is also not multi touch in photoshop 2015.1 CC

  I tried calling the wacom to Australia, but they aren't there and I really need this problem.

  Could someone help me please? I just want to enjoy my new product thank you!

  My specs are:

  4770 K I7

  NVIDIA GTX 780ti - drivers latest

  Samsung 840 Pro - latest Firmware

  2014 Edition Razer Naga gaming mouse

  Razer Blackwidow Gaming Keyboard 2014 edition

  Interface Audio Scarlet 2i2

  ASUS PB278Q

  Windows 10 Pro x 64 - latest patches

  

  Hi, I found that earlier lol.

  I think it might be something todo with Photoshop 2015.1 CC not supporting Multi Touch more like an (experimental feature?) or it's just not recognize my Tablet! Edit: because Corel Painter multi-touch works great and smooth!

  I just installed Corel Painter 2016 and activated "Multi-touch", submenu "Tablet" and this is what you see (below):

  New: I just tried to move from the first (WinTab) radiobox to RTS and restarted and multitouch work more at all! -When previously it worked perfectly!

  I think it is a bug with Photoshop 2015.1 todo and is the new integration of ink system Windows!

  Let me know what you think Akash!

  I'll also try Photoshop CC 2014 and enable Multitouch support in the "experimental features" collum.

  Thank you!

  

• Switching between Macbook and desktop computer with disk and external changes only show in my office... What's the problem?

  I use an external hard drive where I put my photos and my LR catalog.

  For some reason any when I edit photos on my iMac and then take the disc to my macbook to work changes (crops, changes in exposure, saturation, etc.) will not appear. Can I resume on my desktop and everything is fine.

  I keep my photos and my .lrcat on disk. Do I need to have other files LR in the drive to pass transparently computers? What Miss me?

  Please advice,

  
  Eduardo

  Please create a new Test catalog on your iMac, and then import images inside.

  Now take the Test catalogue for the macbook and check.