Card issue - flexibility and customization

Similar Questions

• can I pay the elements itunes with credit card issued to another country?

  Hello

  I have a problem paying my point.

  I asked my credit card Australian suspended from the Bank because someone used it without my permission.

  After that, I tried to check if my credit card (Visa Debit) works or not,

  so I tried to buy a song on Australian Itunes.

  And I could still pay for the song. (2.19AUD)

  I went to my internet banking and it shows nothing regarding the payment for the song in the history of the transactions.

  Also, I checked my payment info in itunes & app stores / setting

  and my card suspension could not be registered which means that the card is suspended successfully.

  (But I had a 2.19dollars song!-_ -?)

  That is the problem. How can I pay AUD 2.19?

  I'll get my new credit of the Australia card, maybe 3 months later.

  (not possible to get a new one at the moment or unsuspended)

  I have other credit cards issued in other countries,

  but it is not possible to record cards in Australian app store.

  everyone knows? Help!

  You can not, you can only use a card issued by an Australian bank with the Australian store (this is similar for all countries; and you have to be in a country to use his shop). You can try to use an Australian iTunes gift card

• BSOD issues before and after a clean windows 7 installed

  Hey, I get BSOD issues after a clean install of windows and I also replaced my RAM with sticks again because I thought that my memory was damaged for some reason any. Is it possible that my hard drive is bad?

  Here's my minidump file:

  https://www.dropbox.com/s/paqnfyylg5yw2bw/012416-20420-01.dmp?DL=0

  Hello

  Since you did a clean install this strongly points to material with only one
  small chance, it is the BIOS, chipset drivers or others. Could be the hard drive, the
  wiring for the hard drive or other hardware.

  BugCheck F4, {3, fffffa800df48060, fffffa800df48340, fffff80002b97f40}

  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  ---------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  =========================================================

  These can help:

  Remove ALL power. Then carefully remove the cards one time and put them
  back in their locations. Do the same for memory, then the cables. A coward or
  corroded connection point may cause strange problems.

  Reinstall the expansion cards
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-excards.htm

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  ---------------------------------------------------------------------------------------

  You may need to check with the mother system/card manufacturer or a computer
  Shop (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• Portege R500: Card reader SD and ODD do not work - drivers needed

  I have laptop portege R500, product number: PPR50E-04X04WCE.

  last year, I changed the operating system and installed windows 7.
  Since then, I can't use the dvd drive or the sd card reader.
  And the control panel it apears two unknown devices, but I can´t find the controllers for these.

  What can I do to fix this?

  I assume you found unknown devices in Device Manager.
  Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
  Here you can find instructions how to identify the unknown devices.

  I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

  Check it out please and let us know if you still have the same problem.

• Satellite A200 - 1 M 4: Flash Cards are dark and not transparent after update v1.1.7

  Hello

  You know Flash Cards is transparent and moving flashy when pressing the FN key.
  After that I downloaded & installed PVAT 1.1.7.see card Flash became a dark, not transparent and does not move when you press FN plus (watch suddenly when pressing FN).

  What's wrong?

  PS. I have A200 - 1 M 4

  Thank you

  Nothing is fake. It is simply a new version. Toshiba has offered this setting day and fixed a big problem. Using the latest version of Flash cards were very slow and it was very awkward. Toshiba has designed the new tool and transparency is no longer available.

  I hope that you know very well that these settings are in need of more resources and laptop runs slower. But in the end I wonder: is it so important to you?

• Satellite L300-2This - WLAN card not recognized and missing partition

  Hello

  has obtained 2This Satelite L300, came empty, XP is installed, are not a tool to determine the inside wireless network card, downloaded the realtek drivers and toshiba astheros, none doesn't work, also have no idea how to determine which card is inside, and how to remove previously installed drivers, link on toshiba to the determin built in WiFi does not work

  Passing over the first set of instructions followed to create a D partition on the HARD drive, for some reason any now have only C with 130 GB so that D is not specified, no idea how to fix

  a big thank you in advance, cheers, Aleks

  Hello!

  You can determine the type of wireless network card if you check the vendor and device ID in Device Manager. Enter the two codes on this Web site and you see what WLAN car you have: http://www.pcidatabase.com/

  Regarding your question on the partitions on the HARD disk, you should look in disk management. Maybe you need to format the first partition or create an extended partition.

  Good bye

• I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  You can use a gift card or a debit card to pay for it.

  (137091)

• I can't with my credit card, narrow band and need to know how to get a new one.

  I LOST THE USED CREDIT CARD EVERY MONTH FOR THE SERVICES OF "NARROW BAND"... HOW I YOU KNOW I'LL GET A NEW CARD AND I'LL TELL YOU THIS NUMBER ASAP?
  
  

  I LOST THE CREDIT CARD THAT YOU RELOAD AUTOMATICALLY EVERY MONTH FOR THE SERVICES OF "NARROW BAND", AND THEY TOLD ME TO PUT A HOLD ON THE CARD TO SEE IF SOMEONE WOULD TRY TO CHARGE TOP SO THEY COULD CATCH AND IF NOT, I MIGHT TAKE THE HOLD IT AND THEY SENT ME A NEW CARD OR SEND A NEW CARD WITH A NEW NUMBER... YOU TRIED TO LOAD MY CARD SEVERAL TIMES AND YOU KEEP to SEND ME ON MY e-mail, BUT I don't KNOW HOW TO LET YOU KNOW what HAPPENED OR WHEN I GET THE NEW CARD.

  [Moved from the community centre of Participation]

  Hello

  Answers has nothing to do with your 'Narrow band' service or your credit card.

  Check with the help of your Internet access provider.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

  Original title: Solitaire stop working right after the update to download

  This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

  Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

• My wireless network card is disabled, and I don't know how to activate it.

  My wireless network card is disabled, and I don't know how to activate it. I have a laptop HP Pavilion Dv9000, which originally had Vista but I installed XP Professional on it. According to Wefi all I had to do is click Start and then click on connect to and right-click on wireless connection and click Activate. My problem is when I click on start... There is no connect to click the button. Anyone know where I can find my connect button?  Thank you!!

  Hello

  Try changing your preferences in the start menu.

  Click with the right button on the task bar > select Properties > start menu tab > and make sure that this Start Menu, menu classic start no is selected. Then check to connect to.

  Or, go to control panel > network connections. Find your wi - fi adapter and right click, select Enable.

• try to sync the music on my SD card box appears and asks if I want to format the device I click on the box to format, then he said: he can't format my device

  original title: How do I format my device

  I'm trying to sync music on my SD card in windows media player dialog box appears and asks if I want to format the device I click on the box to format then he said: he can't format my device

  Hello
  If there are no files on the SD card, go ahead and format. If there is, it is enough to click Cancel and open the folder in the folders where your music.
  B Eddie

• Problems of Battlefield 3 game when connecting to a server: "cannot initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed.

  Im trying to connect to a server on Battlefield 3 as im log on a server I get a message saying: could not initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed. Usually, it is a result of the lack of specific driver of the seller then, how can I fix this problem so that I can play Battlefield 3 new...

  Hi Anthany,

  If you have a hardware device that does not properly with your computer, you probably need a driver updated. There are three ways to update a driver:

  • Use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.

  • Install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.

  • Download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. If Windows Update can't find a driver for your device and the device didn't come with software that installs a driver.

  Step 1: Download and install the latest version of DirectX.

  http://support.Microsoft.com/kb/179113

  Step 2: Download and install the latest graphics driver and see if it works.

  Update a hardware driver that is not working properly(Windows 7)

  Good day!

  Answer please if you face concerns.

• Black screen after login screen. Possible graphics card issue?

  Problems to show after the desktop connection screen. Just the mouse pointer. Everything works in safe mode.

  I have a graphics card separate installed and it worked flawlessly during the initial installation. I think there was some windows update that happened on its own and from there I get the black screen.

  I'm "cleanbooting". All graphics cards are updated... what I have to do.

  Hi Justin,

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  In order to isolate if the problem is caused due to incompatible display drivers, I suggest to start in safe mode, then follow the steps below.

  1. Right click on the Windows logo, and then select Device Manager.
  2. Expand the display adapter.
  3. Right-click on the display driver and select Disable.
  4. Restart the computer in normal mode.
  5. Sign in and check if you can see the desktop.

  Let us know the status so that we can help you.

• I am trying to download a vector file.  I have a paid account.  Every time I try need me on the Subscribe page as I need to pay.  I have a credit card on file and downloads still available from dollarphotoclub.

  I am trying to download a vector file.  I have a paid account.  Every time I try it takes me to the subscription page, like I need to pay (again shows what level I am on).  I have a credit card on file and downloads still available from dollarphotoclub.

  Hello

  Image credits are available on your personal account so please make sure you have this option is selected when you connect to stock.adobe.com, rather than on behalf of the team:

  

  If you still have questions, please let us know.

  Thank you

  Bev