Card memory ReadyBoost is more capable

Similar Questions

• ya need to ready boost like thing for the video card memory

  an if there are something like that out there... where?

  I have the alienware i7 - up to 3.5 Ghz with 16 GB of RAM and 80 GB SSD. The laptop is fast enough.  But I still wanted to make it faster. So, I use card memory 32 GB as a readyboost. I found that speed up really. Before using readyboost, it is best to ensure a speed reading / writing of USB or the memory card is high, otherwise you will have not the advantage of readyboost because the bottleneck of folklore.

  In my case, I used the class 10 SDHC memory card for my readyboost. The memory card is still able to take 3D videos and capable of storing video shooting 3D. My conclusion is don't blame the blessing of readyboost, just you have to find the right type of memory/USB with your existing laptop / computer.

  Use readyboost and enjoy the best performance

• Resolution is dependent on the video graphics card memory?

  Resolution is dependent on the video graphics card memory? If that's true then how much resolution a 2 GB card can support? I mean on what map I'll be able to run a game like 'NFS RUN' on a resolution higher, if I have 2 cards with the same specifications but difference is 1 GB and 2 GB, I don't speak of GDDR3 128 bit NVDI GT 440. ?

  Resolution is dependent on the GPU, and not on the installed memory. The memory will help the screen refresh more quickly, and video help in smoother race.

  According to the specs here:

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-440-channel/specifications

  You should be able to get a maximum digital resolution of 2560 x 1600 and an analog-resolution 2048 x 1536 (VGA). This assumes of course that your monitor will be very high. The highest card ira is limited by the capabilities of the monitor also.

  Thus, the memory card more than video, that you, smooth graphics should work, but it will have no effect on the resolution.

  SC Tom

• CARD MEMORY 64 GB NOT RECOGNIZED BY MY MOBILE GALAXY NOTES II

  Dear Sir

  I use the 64 GB memory card in my samsung II Galaxy note, card memory sunddenly is not recognized by mobile and it was showing audit errors, other card memory running in my laptop. Help, please.

  Hola, BAVAJI

  Dear user
  Como otras memoria tarjetas is ejecutan en su celular, it check that el mismo acepta las nuevas tarjetas of 64 GB SDXC (extended capacity) son. Telefono VEA is if el este logo, o el manual.
  Means Quebec 4 32 GB SDHC (from alta capacidad) son.
  Asumiendo knew movil, if tiene el logo SDXC, entonces all lo siguiente:
  1- Por favor, in primer lugar, clean los pines of the tarjeta con alcohol isopropilico (o comun). Luego, see if works.
  - 2if no es asi, seguimos: apply the SDXC card in a laptop (o mas), directly known puerto, con a good useful (no UN lector tarjetas, ojo).
  3- Hacer copia of seguridad del contenido, y guardarlo in otro lugar.
  4- el icono of the tarjeta, haga click con el boton derecho del raton, y luego / Propiedades / Herramientas / Comprobacion errores.
  Suerte.

  Saludos, Alfred.

  -------------------

  Hi, BAVAJI

  Dear user

  As other cards of memory running on your mobile phone, check that the same accept new 64 GB cards, which are the SDXC (Extended Capacity). See if the phone has this logo, or in the manual.
  Don't forget that the 4 GB to 32 GB are SDHC (high capacity).
   
  Assuming that your cell phone, if the SDXC logo, then we will:

  1- please, first of all, clean the pins on the card with isopropyl alcohol (or common). Then see if it works.

  2- if not, we continue: place SDXC card in a laptop (or more), directly to its port, with a good adapter (NOT a card reader, an eye).

  3- make the backup content, then save it somewhere else.

  4- in the map icon, click on by the right button of the mouse, then use / properties / tools / error checking.

  Chance.

  Sincerely, Alfred.        (Google translation).

• Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  The reason that I ask is that I would like to use the iPhone OS at work, and the rest of the time using my iPhone more than 6 s.

  Hello

  Yes, it should work ok with the same identifier apple for iphones.

  See you soon

  Brian

• Satellite L350D - what is real graphics card memory?

  Hello
  I want to ask for Ati Radeon 3100 fomr satellite L350D 20 d... im bit confused after the last control...

  front on 64 bit Vista I have been see in DxDiag details abuts memory installed in L350D 20 d. It was 1 700 Mo!

  now I got 32 bones... and in DxDiag and Ati Catalyst I see 700 MB memory graphics card... but I have just instaled a software called HWiNFO32 and I see different k soemthin to what I ca nsee in DxDiag and catalyst... :
  I add screans:

  On this one, you can see Ati Catalyst and in the Information Center are 700 MB of memory in Ati radeon 3100
  http://i43.Tinypic.com/14cttw3.jpg

  on the screan shot u ca nsee DxDiag details abuts AtiRadeon 3100 memory wht is 700 MB... but on the right you can see butts HWiNFO32 and details all my Toshiba Satellite L350D of 20 d and what is weird it me showing that 256 MB on graphics card memory...
  http://i44.Tinypic.com/16m1suw.jpg

  so here's the question... What is really AtiRadeon 3100 memory in Toshiba Satellite L350D 20 d?

  Post edited by: MzytengaM

  Hello

  I found a piece of info Ati Radeon 3100.
  Please check:

  

• Tecra A9 - controller card memory under Windows XP?

  Hello, I have a new Tecra A9 - 51G. I've had to downgrade Vista to XP Professional and evrything works fine, but Windows cannot find memory card contorler, and I can't use 5-in-1 Bridge Media slot (compatible SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card). Please help me. I need this driver. Thank you.

  Hello

  Have you installed all the stuff including utilities SD Toshiba download page?

• Satellite L555 - 10 M graphics card memory

  Hello
  I bought the Satellite L555 - 10 M mobile a few weeks previously. the product describtion says that the graphics card has 1024 MB memory and it can also use RAM. Now, I noticed that it uses 1768 mb of RAM, but for me the 1024 MB of memory are sufficient. So, how can I change the graphic card memory settings?

  Thanks for all answers

  Hi mate

  It seems that you have no idea how to work things together.
  The graphics card sharing memory automatically! Everything is controlled by the graphics driver.
  If the graphic needs of memory then the driver could affect the value and would take a part of the main memory automatically!
  It is not a switch not an option that could be used to change this value.

  So if you ask this-> + why buy a laptop with 4 GB of ram so I can not us it? +
  I have to say; Show me a mobile graphics card that doesn t share memory?

• Card memory ThinkPad E540. Which one to buy?

  Hello!

  I am owner of a 00HFR of 20 6 E540 which came with a card memory made by Samsung (4 GB) (4 GB 1R8PC3L - 12800 S-11-13-B4 M471B5173 EB0 YKO 1432 says on the label)

  I would like to increase the amount of available memory, but the cheapest way. So I have a couple of options if I'm not mistaken:

  Buy a 4GB module pair with the existing, for a total of 8 GB.

  Buy a module of 8 GB for a total of 12 GB.

  If I'm not mistakent, the option are possible, but the 8 G module will be less good preformance over the same module size in both slots.

  I have a few questions:

  Which module should I buy: Corsair, Crucial, Kingston, G. Skill? (Here is the brand my dealer sells)

  I would be very happy to get a P/N for options 4 and 8 GB.

  Thank you very much in advance for your help and response.

  I'd say go with the configuration 4 + 8GB. Any generic 8 GB DDR3L 12800 S should work (avoid even if Corsair; there were a few problems with it and ThinkPads in the past).

• VIDEO CARD MEMORY.

  HOW TO INCREASE MY LAPTOP GRAPHICS CARD MEMORY?

  This question has been asked and answered in another category
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/ba362a6b-fbff-48fb-B738-cc620426a205
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove a card memory protected write?

  How can I remove the write protection of the memory card?

  Hello

  Memory card is write protected or locked
  http://KB.SanDisk.com/app/answers/detail/A_ID/1102/~/memory-card-is-write-protected-or-locked

  -------------------------------------------------------------------------------------------------------------

  Registry hack to disable writing to USB keys - a Reg file to turn on and off
  http://www.howtogeek.com/HOWTO/Windows-Vista/registry-hack-to-disable-writing-to-USB-drives/

  Enable USB write

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies]
  "WriteProtect" = DWORD: 00000000

  Disable the written USB

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies]
  "WriteProtect" = DWORD: 00000001

  ----------------------------------------------------------------------

  The works of link MyDIgital Life - to reverse the trend set it to 0.
  http://www.mydigitallife.info/write-protect-and-disable-USB-drive/

  Run the registry (regedit) editor.

  Navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

  Create a new key named as StorageDevicePolicies.

  Highlight StorageDevicePolicies, and then create a new DWORD (32-bit) named as WriteProtect.

  Double click on WriteProtect and set its data value to 0.

  (Value 1 to enable saving - brands it read-only)

  ==========================================

  Check the methods of 2nd and 3rd in this link (1st methods is identical to the above) in
  "If the above method works for you, follow the steps below" and those in "The".
  two steps above will solve the problem. If you still experience the issue, follow the below
  "steps:

  Remove writing on USB, USB stick or card memory or iPod Protection
  http://troublefixers.com/remove-write-protection-on-USB-pen-drive-or-memory-card-or-iPod/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• BlackBerry smartphones can not move images of the device towards Media Card memory, or a copy of PC

  A mess of configuration sent pictures to a folder in the device memory.  (Device memory/Home/User/images) All my previous photos went to the memory card. (Media Card/Blackberry/pictures)  I'm not able to move the photos in the folder of the memory of the device, or the card memory or my PC.  Procudes downbload 'Move' and normal PC does not work (I can't in the files of the memory of the device through my PC and the Blackberry won't let me spend the memory of the device to the media card).  These photos will be lost if I can't move.  I don't want to send by e-mail. How can I move the photos in device memory/Home/User/photos either the press or to my PC card.  Help!

  I just did this on my phone, so I know it works. On your phone, go to the media folder, press key (options) BB - and select Explorer. Select the device memory and find your images open, your photo will be displayed in an orThumbnails of the list, choose the image that you want to move and cut it. go back ot Media Card, then select Paste to the folder you want that it to. You may need to do this with all the pictures, one at a time, as I couldn't copy/cut the whole folder. All photo Apps that you also make sure that you place to save on media card. Good luck

• My computer can't find my card memory cameras (or other card memory cameras) or card reader

  I'm trying to upload pictures to my laptop Windows 7 but when I plug my Canon 400 d in my laptop, a 'negative' noise is done and I'm unable to find (this also happens with another Canon 400 d and a separate memory card) I am also unable to find my card reader (who previously worked fine) I tried with blank memory cards (memory compact flash) and those with pictures on any work! I also can't find the drivers to uninstall please help:(tout mon travail de ports USB fine, Merci d'avance!) If I need to reinstall the drivers if you please could you tell me exactly which (there are many on the Canon site) thanks!

  Hello
  Have you tried the steps that I mentioned in my previous post and check in your device manager on the status of the device?
  Apparently, the card reader device needs a driver appropriate on the computer right now. You will need to contact the manufacturer for the Web site where you dould download drivers for your card reader.
  Hope this information helps.

• Use 1 8 GB or 2 cards memory 4 GB in MB Pro 17"

  Hi all -

  I have a 2011 end Pro 17 "MacBook, which initially provided with 2 cards of memory 2 GB of quantity. Wishing to move to 8 GB, I ordered 2 cards of 4 GB of quantity, but the company that I ordered me delivered a single 8GB card.

  My understanding is that 2 cards of 4 GB qty is a more optimal for my machine, rather than the only card of 8GB.

  Can someone confirm or deny this?

  In the end want to make the best choice for the optimal functioning of the machine.

  Thank you very much!

  You can install 2 sticks to get 8 GB 4 GB.

  OR you can install 2 sticks to get 16 GB 8 GB.

• HP Pavilion 500 - 200 t: card memory HP Pavilion 500-200 t and upgrade information

  I'm about to take my 10 GB of RAM RAM 16 GB of RAM and 500-200 t has only two slots for memory card. When I replace (2 x 8 GB cards) I have two 5 GB cards flying over. I need to know the exact left specifications more cards? I want to put the card in my Dell XPS 8500 4slot who has already 2 x 4 GB cards in there. And the specifications on Dell cards are cards of DDR3 1600 MHz. Can someone tell me the specs on the HP 500-200 t maps?

  Please see the specifications of the product HP Pavilion 500-200 t and configurable Options page for the information you request. Based on the specifications, the factory in your computer memory should be 10 GB (1 x 2 GB, 1 x 8 GB) DDR3 PC3-12800. The speed is DDR3 - 1600 MHz. The size is a guess based on your statement "I'll have two 5 GB cards flying." Memory is available in sizes based on the binary progression... example... 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, etc. There is no such thing as a 5-GB card.

  As to put in your Dell... it may or may not work depending on the latency and/or refresh, or if it is dual channel.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation