OptiPlex 360 NIC for Win 7 upgrade

Similar Questions

• OptiPlex 360 drivers for Server 2003

  I have an Optiplex 360 that is running Windows Server 2003 and the video card was not all the drivers loaded for him. I think it's the installed Intel graphic card, 4 I see on this PC, but I have been unable to find a suitable driver for it. I tried to download the drivers from support, but none of them work. Any suggestions would be greatly appreciated.

  With older drivers, there may be issues certificate which means that you will have to roll the return date / time and or install the driver in compatibility mode.  Drivers, DirectX and video and Audio services are DISABLED BY DEFAULT in Server 2003.   I installed 2003 server on my 360 and it worked very well, including drivers. But this is not cookie cutter out of the box.  You must enable the appropriate services before installing the drivers.  Drivers intel aren't addin video card drivers AND Chipset Drivers MUST BE INSTALLED first before anything. The forum is not a medium step by step for an end of an operating system on an unsupported platform.  Even microsoft paid a pension will not learn how to install the server on servers not drivers.

  Intel Chipset Software Installation Utility, v.9.1.1.1015, A01, see details

  R227558.exe
   

  Controller of graphics Intel G31/G33/Q33/Q35, v.6.14.10.4957, A06, see details

  VIDEO_DRVR_WIN_R234838. EXE

  Analog Devices ADI 198 x integrated High Definition Audio Driver details

  R228747.exe

• Need to find a way to install Win Vista Home (I have my own series) for Win 7 Upgrade post.

  My laptop came with Windows Vista, and I recently bought an upgrade to Windows 7 for her. The upgrade works only as an upgrade, not as a stand-alone installation.
  My computer recently crashed, and with top Vista recovery CD is defective, so I have no way to use the upgrade CD.
  Is it possible to arrange a download of the Vista test for my to validate with my own serial number or to order a copy?

  Hello

  Here are different ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Check if you have a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• The Pavilion 743 G for Win 7 upgrade

  Hello

  I have a Pavilion 743 G with 1 GB of memory. I used the Win7 Upgrade advisor, and he pointed out that the graphics card is not compatible. Could someone tell me

  (1) what is a compatible graphics card?

  (2) can I increase memory also and, if so, how?

  (3) is an effort worth it?

  I'd appreciate any suggestions.

  Thank you

  Sanjeev

  Here are the specifications of your HP Pavilion 743 g Desktop Computer. and it is the motherboard THE P4G (Corolla) or TriGem 129504 (imperial) . In both cases the maximum memory is 1 GB or 2 GB and or motherboard are supported using an AGP or PCIe x 16 graphics card.  I would say it isn't worth it to upgrade a computer since 2002/2003 and you can switch to a newer computer.

  Please send Bravo

• Dell Optiplex 360 CPU Upgrade Qeuestion

  Hello. I've owned a Dell Optiplex 360 Mini-Tower. I made a few updates already as a 500W what ATX PSU, 4 GB of RAM and a dedicated PCI-E graphics card but I want to upgrade the processor that comes with it. He is currently running an Intel Core 2 Duo Duo E7400 and I would like to an E8600. According to the service manual Dell Optiplex 360, it is the maximum CPU I can http://www.citgrup.ro/pdf/Calculatoare/Calculator_Dell_Optiplex_360MT_specificatii_tehnice_citgrup.pdf my question is should I also upgraded the heat sink housing / owner Dell fan or can I use the same one that came with my case? You want to make sure that I have no overheating issues as well and the heat sink is enough for this upgrade as this CPU is listed on the technical guide. Also, someone has done this before CPU update can give any feedback as well? Thank you.

  They are the two Wolfdale so must use the same heatsink / fan of the case. Don't forget to clean the old paste and apply the new paste.

• Any 'new' tips on laptop vista upgrade for win 7?

  Any new help appreciated on the vista upgrade laptop for win 7

  Any new help appreciated on the vista upgrade laptop for win 7

  Hello

  Windows 7 is not free; you have to buy.

  Microsoft sells more Windows 7; Try Amazon.com.

  @@@@@@@@@@@@@@@@@@@@@@@

  This offer is free years; long expired.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  @@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• Acer laptop Vista Home Prem to Win 7 Home Prem upgrade, will be stay again drivers intact for Win 7?

  If I buy the Win 7 Upgrade kit for driving my Acer laptop from Vista Home Prem to Win 7 Home Prem, will be the drivers remain intact for Win 7 or do I have to manually look for them online?

  Hello

  you will need to go to the website of Acer and see if windows 7 drivers are available for your model and bring manually

  http://support.Acer.com/us/en/product/default.aspx

  for any repost of issues of windows 7 in the forums of windows 7

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• upgrade xp driver for win 7

  We have a DJ5000ps plotter with an xp driver. Just bought a new computer with Windows 7. This Tracker is no longer supported. Is it possible to have a driver for win 7? Can I combine the .inf for xp file in Windows 7? Anyone interested in writing a pilot for us? We can just not a new tracker at the moment. Thanks for your help.

  Hi landarch,.

  As Bob_Headrick says in his post below.

  This forum focuses on the level of consumer products.  For the Designjet you can have better results in the forum HP Designjet here.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software/is-there-Windows7-driver-for-HP-Designjet-5000PS/TD-p/1249737

  However, I found an "accepted Solution" where some customers have had success using the mode of Windows XP to Windows 7 PCs.

  http://h30499.www3.HP.com/T5/Windows-7/Designjet-5000-PS-need-Windows-7-64bit-driver/TD-p/1129850

• Upgrade from Vista 64 for Win 7 64

  Have Pavilion Media Center m8530f computer. Comes with Vista 64-bit installed and I would go to Win 7 64 bit, but I can't find the drivers on the HP site? Can someone help me find the necessary drivers (and, perhaps, necessary updates to the BIOS) for Win 7?

  Thank you!

  Thanks for the reply, Hans.

  Intend to do a clean install with Win 7. I appreciate the fact that Win 7 will have driver support but I expect to need drivers for: chipset, video, audio and network, at the very least. Take a look at the website of HP support to drivers available for the existing installation of Vista 64 - that's what I'm looking for Win 7.

  In fact, I just followed your link of BIOS and all the necessary Win 7 drivers are here!

  I couldn't get to this page from the HP Support/download site.

• Can I restore my OptiPlex 360 settings without reinstalling Windows?

  I have an OptiPlex 360 running Windows 8.1. I'm not the original owner, and the previous owner has left a top Windows password. Is there a way to bypass the password without reinstalling Windows?

  I tried the following:

  • Shift + reboot: all the useful options on this screen requires either a password or a reinstallation of Windows. I don't have an installation or a recovery disk, but I can get one if necessary.
  • F2/F12 during startup: I have not found all the options to restore the factory settings.
  • Installation of Windows 10: I tried to burn the disk Windows 10 for a DVD image file and start from that, but I didn't get the error message "boot device available."

  Factory settings can be restored in the Dell boot menu, or should I ask this at Microsoft Support Forum? Do I need a recovery disk?

  Thanks in advance.

  The OptiPlex 360 has not supplied with Windows 8.1, it had to be a level of detail. You will need to clean Windows Installer, but given the fact that you don't have the Windows 8.1 key detail you can't simply clean reinstall Windows 8.1.

  If you can get the Windows 10 Insider 10130 .iso image file, you can use this upgrade:

  http://dellwindowsreinstallationguide.com/Windows-XPVISTA-%E2%86%92-Windows-10-free-upgrade/

• OptiPlex 360 - graphics card working on PCI-e 1 x only

  HI: I was rebuilding a regenerated Optiplex 360 MT in a light box. Updated to Windows 8. 1. Update bios to A07 and all drivers from the chipset for later. Updated the CPU to an Intel Core 2 Duo E8500. Everything is going well so far. Wanted to upgrade the video card in the old Radeon 3450. Bought a MSI Geforce GT720 because it requires little energy to adapt to the constraints of the power supply.

  Card installed fine and works OK, except for one important detail. Executes the PCIe 1 x link, rather than 8 x (this card works max 8 x instead of 16 x, I think that because of its low energy consumption). I confirmed in X - CPU and GPU - X.

  Have tried a number of things:

  -replace the old card to confirm he was running the PCIe x 16. He does.

  -deleted the Gforce drivers to seeif that makes the difference (he didn't, still 1 x).

  -reinstall all drivers Gforce and updated at the latest

  -reran the Bios A07 update (Bios at startup show execution A07)

  -read through all the old posts I could find here and on Toms Hardware solution - see nothing beyond what I tried.

  Only thing I can think is to drop the video card in an another Optilex 360 to see if it at 1 x on this machine also works to eliminate a problem with the slot PCIe himself.

  Someone at - it any other suggestions? This card will work everything just not at more than 1 x in a PCIe 1.1 slot?

  Any ideas would be greatly appreciated. Apart from that, is not a bad little machine (considering the minimal cost to update).

  I suggest to download and install the Client of Battlenet and try World of warcraft and fiercest and Diablo3 etc..

  Also, I recommend that you install Directx June 2010 and re activation Dotnet 2.0 to 3.5 in Panel, programs and features, add windows components.

  Do the windows 27 947 updates that must be made during 10 restarts until it says is updated not more.

  It could very well be that, unless you get a X 16 card bios assumes that all other cards are X 1.

• Satellite A500: Multimedia keys do not work after Win 8 upgrade

  Hi everyone, I run Toshiba SATELLITE A500 - 1C0 (PSAR3E-01300WPL) with Windows 8 PRO x 64.

  As I noticed - post factum /:-'Models supported' not supported for Windows 8 drivers of my PC.

  Although, the computer will work perfectly, but I have a little problem with my drivers: the Panel at the top of the keyboard (http://goo.gl/IQVAG) works not only put on mute, volume up/down work, but the ECO button and media buttons are NOT - is there any method to upgrade the drivers so that I can use all the keys?

  I installed TOSHIBA eco utility and it works fine, but the buttons do not respond. I can't find and update the driver/ulitity that is responsible for this issue.

  I also want to ask if there is any chance to get the TOSHIBA for Win.8 drivers for my Satellite A PC series in the future. Y at - it a utility to analyze and automatically update TOSHIBA drivers? (but not Toshiba drivers Update Utility, which does not work in my case - it offers me to downgrade my drivers!)

  I opened the Device Manager and tried to update the drivers manually, but - that's even BIGGER problem then eco Panel etc. - some devices are marked as "unknown devices" and may not be recognized at all.

  Thank you for your help,
  oddajlatarke

  > is there a method to upgrade the drivers so that I can use all the keys?

  Method? Name is no other method as to try some tools to win 8 released for other series of laptop. The multimedia button requires installation of VAP (value package).
  Check and test the VAP to win 8 released to win 8 supported notebook series.

  > I also want to ask if there is any chance to get the TOSHIBA for Win.8 drivers for my Satellite A PC series in the future.
  As you said above; computer laptop isn t Win 8 supported model, so I doubt that you will get all the drivers Win 8 in the future.

• Question about product key for Win7 and upgrade Win8

  Please correct me if I'm wrong.

  I got the impression that it is a key to general product on the back of most mobile phones HYF8J-CVRMY-CM74G-RPHKF-*.

  If I bought the victory 8 update and it activated on my * office * (assuming I installed win7 using this key) what does that mean? Since it is a General key on many laptops.

  This means that I am legally eligible to upgrade?

  Hello

  Above all, the key of Win 7 you can find on the lower part belongs to the preinstalled image.
  It is the key of Win 7. Your Windows 7 system has already been activated by default

  Now to win 8 upgrade:
  Visit this page to upgrade Toshiba EU win 8 for details:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-message

  The upgrade to win 8 is available if you purchased a PC preloaded with genuine Windows 7 Home Basic, Home Premium, professional or ultimate edition between June 2, 2012 and January 31, 2013.

  If your laptop is NOT bought between June 2, 2012 and January 31, 2013, you will not be able to move from Win 7 to 8 Win, but you can buy the full version of Win 8.
  The key would be provided by Microsoft mail.

• Satellite P300 PSPC4A - BIOS no updates required for Win 7?

  I have a Satellite P300 (PSPC4A-03P01P)
  Currently 2 hard drives, both are partitioned.
  Disc 1 - C and D
  Disc 2 - F and G
  Current operating system on the C drive is OEM Vista 32-bit HP
  BIOS version is V4.20. 05/01/09

  I want to upgrade the Win - 7 HP 64-bit operating system
  I know that this will require a format the C partition.

  In preparation, I downloaded all the drivers for Win 7 64 bit

  My Questions:

  The BIOS will require the update to support 64-bit?

  If partitions D, F and G are left intact, Win-7 64-bit on the C drive will be able to read?
  Or these partitions will also require formatting?

  Thanks for any help

  Hello

  There is no relationship between the BIOS and the operating system. Thus, you need not upgrade Bios for Win 64 bit.

  > If partitions D, F and G are left intact, Win-7 64-bit on the C drive will be able to read?
  > Or those partitions will also require formatting?

  You can install the Os on C: and it will be able to read information on other partitions too.

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format